I am creating a webform in which I am having two radio buttons (Yes/No), one textbox, and two lables.
I want to enable and disable the textbox on radio button click Yes and No respectively.
I want to use custom server control for this whole process as we have to use this DLL in other application also.
Being as beginner I got just confused about event handling methods for server controls.
I have a custom ascx user control on my page that includes a dropdownlist. There is an onSelectedIndexChanged event handler that is connected to this dropdownlist. The first time the user selects a value, the page does a postback and the logic executes correctly. However, if the user then goes to change their selection, the event handler does not get triggered.
View 3 RepliesI have a custom control which contains (amongst other things) an imageButton.
I'm adding a handler to the "click" event of the imageButton however when the button is clicked the handler routine is not called. where I am going wrong with this? should I be handling the click event in some other way?
here is my code:
[code]....
one is anchor tag and other asp linkbutton tag
we want to call user defined function on onclick of anchor tag and as well as linkbutton
is it possible?
I'm creating a custom ASP.Net GridView and I want to be able to alter the __EVENTARGUMENT value but I can't figure out how to capture the returned value on the server side.
I'm creating the ability to have a collapsible representation, so the first level is the standard GridView and I will insert additional rows via JavaScript if they expand the first level row.
My problem is how to create a link on the selecond level rows that posts back with custom data.
I am trying out some code which enables me in creating a page with extension .asp2
The tags included will also be custom, something like:
[code]....
I have done the necessary changes so that ASP.NET identifies the extension. I have also kept a mapping of custom tags and asp.net/html tags with myself. With this I am able to render the page on browser. But how can we do event handling(usually done by page postbacks and code) in such a scenario?
I have a custom ascx user control on my page that includes a dropdownlist. There is an nSelectedIndexChanged event handler that is connected to this dropdownlist. The first time the user selects a value, the page does a postback and the logic executes correctly. However, if the user then goes to change their selection, the event handler does not get triggered.
View 2 RepliesOn my master page , I have "Search textbox" and "Search Button".
On My content page , I have a "User Control" which has a "GridView".It shows some data about Vendors.
Also, on this User Control's Page Load, i have code written to display all vendors in GridView.
Now, when user enters Vendor Number in "Search textbox" , and hits "Search Button" , i want to handle this event inside my User Control.
How to do this ?
I have a custom control that renders a button. I'm trying to attach a server click event but it isn't firing. My code is:
protected override void CreateChildControls()
{
btnRangeGo = new Button();
btnRangeGo.CssClass = "divSearchGo";
btnRangeGo.Text = Resources.CORE_Resource.S0C29; // Go
btnRangeGo.Click += new EventHandler(btnRangeGo_Click);
// Tried with no luck:
// this.Controls.Add(btnRangeGo); // Needed so OnClick gets registered
// Page.Controls.Add(btnRangeGo); // Needed so OnClick gets registered
}
private void btnRangeGo_Click(object sender, EventArgs e)
{
int i = 1;
}
OnRender:
btnRangeGo.RenderControl(writer);
My CompositeControl creates dinamically several RadioButtonLists according to the DataSource information. These controls are added to the Controls list and rendered in CreateChildControls event.
I need to create a LinkButton that clear a specific RadioButtonList selection and do a postback, to load the DataSource information again (some selections changes the data that need to be loaded from the database). For each RadioButtonList, I've put a LinkButton and assigned the Click Event to a method inside the same CompositeControl, to do the RadioButtonList cleaning.
Unfortunatelly, the LinkButton doesn't trigger the Click Event. In HTML code, the link has the "onclick" attribute setted with the asp.net event, but when clicked, nothing happens.
am creating a custom server control and there are textbox and button.
I want to add event button to let user execute his/her own code.
I mean my event must show in Events menu at VS (like Property)...
the following image show :
i have some problem with my userControl. Pls look below for better understanding. Pic1. The default page. When i click on the links on the left, userControl will load into the placeHolder as in pic2. But when i click on the Clear button that is inside the userControl, instead of clearing the text in the textbox, it load back to the default page show in pic1. Can anyone pls advise me what went wrong?
View 9 RepliesI created a customDropdown usercontrol with Events and It worked fine.
Now I stored the path of the ascx file in the database table and i want to Load the ascx file and handle the Events dynamically in an aspx page.
To Load the usercontrol and access the public properties and method, I need to know the object i am trying to load, right?
For Example
FeaturedDDL c = (FeaturedDDL)Page.LoadControl("~/FeaturedDDL.ascx").
But I dont want to hardcode objectType "FeaturedDDL", coz i dont have that stored in my Database field.
Since I am loading the usercontrol by getting the path and name of the usercontrol from the database table,how will I know the ObjectType at that time?
How to accomplish that and also how to handle the events for these type of situation?
I have a user control say SearchVendor.ascx which contains 4 buttons a gridview and another user control. I need to load the control dynamically actually as a modal pop up
I get this code
var uc = Page.LoadControl("~/blah/VendorProductSearch.ascx") as VPSearch;
uc.ShowVPSearch(true);
_tempPlaceHolder.Controls.Add(uc);
it works fine the control gets loaded properly but onclick of any button the second time the control disappears ?
I want the dynamically added control to remain until the user clicks on the cancel button
Hope this is the correct forum for this question. I am using VWD 2010 an have a web project and get the following error upon execution:
Parser Error Message: Unknown server tag 'custom:AjaxValidator'.
My code is as follows in the .cs file:
[Code]....
[Code]....
I'm using a ModalPopupExtender in my website, to show "accept/cancel" messages, and catch the user selection at the server side. I put two buttons (ok/cancel) at the panel that will be shown as a modal popup, add them a server side event handler, but it does not fire.
[Code]....
On my master page , I have "Search textbox" and "Search Button".On My content page , I have a "User Control" which has a "GridView".It shows some data about Vendors.Also, on this User Control's Page Load, i have code written to display all vendors in GridView.Now, when user enters Vendor Number in "Search textbox" , and hits "Search Button" , i want to handle this event inside my User Control.How to do this ?
View 2 RepliesI built a webcontrol showing a complex user interface with a lot of javascript. Basically my webcontrol is similar to : [URL]
Now that most the user interface is working properly, I'm stuck with the following issue: I want to add a button (html button tag) which has to trigger an event. I have been able to declare the event, the event args, the delegate,etc. The page using my control may assign a handler and that handler is called correctly when I explicitely call OnServerControlClick (The name I gave to the event). I cannot make the link between the button in the user interface and the event in the webcontrol source code. When the button is clicked, I get an error message saying a dangerous Request.Form value has been detected.
I have a base server control class for all my user controls. Inside this class I have the following declaration:
[Code]....
Concrete user controls used in the application are used always inside a ModalPopupExtender object and the popup it is always handled with server-side code. This means that there are no controls binded to the OkControlID and CancelControlID properties of the ModalPopupExtender.
The responsibility to show the Modal Popup is then given to the aspx that has code like this in the ASPX file...
[Code]....
To hide the modal Popup the aspx just implement the event handler
[Code]....
Last, the event firing is responsibility of the concrete UserControl class that can use any way to do it's work and then fire teh event. This is done through this code:
[Code]....
The problem I am facing to is that in the OnItemSaved of the super class the ItemSaved EventHandler is always null and so the event it's never fired on the aspx page. Where am I doing wrong?
I come from the Windows forms side and started using ASP.NET. I have not found how to use event handlers properly.Basically I want to create a shopping cart web control. When a purchase has been made I want to raise an event with products in the purchase. I would like to have the shared/static event and delegate on the web control and then, maybe in Global.asax (if not possible elsewhere) handle that event.
How can I do this? It seems I cannot access objects from other pages/controls.
I have a custom control which inherit from the Table class and in the constructor, it takes a an integer as an argument. There is no empty constructor.
Is there a way for the user to set that variable in the properties window after they drag the control onto a form.
I know some .NET controls, you can set the source for the parameter to different things like another control's property, QueryString using just the properties window.
Right now, I have to create the control dynamically. I read the query string and then created the object.
here's a situation and I would appreciate your response.
I have programmatically created the Wizard control:
Page_Load(obj s, evargs e)
{
Wizard ClaimDetailWizard = new Wizard();
foreach(int item in selectedItems)
{
//create new step
//added custom control to new step
//add step to wizard
}
//added wizard to a placeholder on a page
}
Based on List I get from Session i added new steps to my wizard To each step I had added a custom control
Each custom control in tern contains another custom Gridview Control in it.
So here's the problem when the page loads for example for two steps. All is good Wizard does what it's supposed to do.
But when I try to use sorting or paging in that custom Gridview. Somehow it displays the gridview I should see in the next step of the wizard.
Also what I'm noticing through debugging. Is that when I press next in the wizard I go back to the original page where I do all of the code specified above, and it recreates the wizzard. But it goes to the next step. Is this the way wizard supposed to work? Just doesn't seem very efficient.
I need to develop control (template or user) which must have subtags with some items.
For example :
<SomeControl runat="server" id="scTest">
<column1>TestColumn1</column1>
<column1>TestColumn1</column1>
<column1>TestColumn1</column1>
</SomeControl>
This control may contain some other web server controls such as GridView.I need explanation of experienced developers, how to do that - take me to the right way
i am new to technology so go easy on this post according to what i read from web there are 3 type of custom server controls 1 superclass2 composite 3 renderedi found video tutorial for superclass custom server control but couldnt find video tutials for other 2.lease forward me link for composite and rendered custom server controls video tutorial
View 1 Repliescreated a Custom Textbox Control that is intended to be a "masked date" textbox, so that I can handle different ways a user might enter in a date and make it work no matter what.I did this by creating a custom control with 3 separate Textboxes one for month,one for day one for year,then do some handling for different things that could be entered and it would all work.
The problem I am having is,when I add this control to the page,if I do an alert to check the Text value of the custom control it just gives me "[ServerControl1]" even if I enter in a date.
I tried doing an AutoPostback after entering so that it would refesh the Viewstate to have the values of the textboxes but the control doesnt seem to actually postback, even though I have it enabled.accessing the Textbox value after someoen
has entered a date?first custom control I have created and have been using google.
My Server Control Code is as follows:
[Code]...