I have created a web site, and i'll publish it... I wanna know if anyone who get access to my FTP and download my pre-compiled website can "revert" the DLL compilation, and re-create my code behinds!
View 3 RepliesHave a project that was created in Visual Studio 2008 and deployed to a 64-bit Windows 2003 server. This application references a 32-bit Interop.ActiveDs.dll. The applications were originally compiled for 'Any CPU', however, explicitly compiling as 'x86' doesn't solve the problem. The project targets the 3.5 framework.
The server is running IIS 6.0 in 64-bit mode. When we deploy the version compiled in Visual Studio 2008, the app runs perfectly fine; all pages show up. In retrospect, this is actually surprising.We migrated the application to Visual Studio 2010 (we did not change the targeted framework) and redeployed. Now we get a BadImageFormatException loading Interop.ActiveDs.dll. Which actually makes more sense than the 2008 version running.To solve the problem, we set Enable32bitAppOnWin64 to true and ran aspnet_regiis.exe -i from the 32-bit folder of the 2.0 framework (as per various instructions on the web). In IIS, web service extensions, there were two versions of ASP.NET 2.0, one for 32-bit and one for 64-bit. We prohibited the 64-bit version, restarted IIS, and launched the website.
What we expected: The app to run as 32-bit, load the interop, and display
What we got: "Service Unavailable"All other web pages that were previously working displayed the same message, as did the Visual Studio 2008 version.The support page here describes the problem exactly, but tells us to do exactly what we did to resolve the problem (enable 32-bit mode).We've rolled back to 64-bit mode in IIS and deployed the Visual Studio 2008 version for now, but we really need to figure out how to make this app run and load the interop (there are also 32-bit Oracle DLLs that are referenced)Two questions:Why does the Visual Studio 2008 version work at all??
How do we get the Visual Studio 2010
I tried to install Visual Studio Prof 2010 trail version in my system, but i got an error saying 'Please remove/uninstall Visual Studio 2010 load test controller' to proceed installation. i uninstalled my previous VS2008 software from system and i could not find anything like 'Remove/Uninstall Visual Studio 2010 load test controller' software in my Add/Remove Programs.
View 1 RepliesI'm thinking about installing vwd 2010 or vs 2010 express but want to know if either offer integrated jquery support.
View 4 RepliesEvery time i make a code change using VS2008 , in order for it to take effect i have to delete the files in the
"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files" directory and then hit F5 .
is it possible to convert whole visual studio 2008 web site project to visual studio 2010 web site project
my current project references
i have a very annoying iis problem
iis server stops working until app pool is recycled
i am hoping that new visual studio (net framework 4.0) may solve this very annoying unsolveable problem
I have multiple solution configurations defined (Debug, Release, Local, Test, Production etc). I would like to assign this Config into a c# variable.Something like:
string configName = #(Config);
Is there something like this? It has to come from the solution configuration. I know I could hard code the solution configurations into the c# configName variable using multiple if conditions but wondered if there is something like above.
I'm having trouble understanding when the site is considered "pre-compiled". As I understand what I've read, if I use the Publish or Build Deployment Package options from within Visual Studio then it is pre-compiling, but if I just use something like xcopy, then it is not pre-compiled.
View 2 RepliesAnyone know if I can maintain a VS 2008 (.net 3.5) project by using the VS 2010 IDE ?
View 1 RepliesI recently ran into some strange problems. Changes to files that are not code-behind (and not gets compiled to a DLL) should not require you to recompile the whole website, and this has never been I problem for me. These should actually get compiled dynamically when you first access the resource, e.g. the first time when browsing an updated aspx-page in the browser.
But yesterday, during development of a website, I noticed that even the smallest changes in html, javascript or anything in the .aspx-files doesn't get reflected when I save and reload the page in my browser. Rebuilding doesn't help either, actually I'll have to do a "Rebuild All" (in Visual Studio 2008) in order to see the changes. This applies to all aspx-files in my project.
I tried with minor changes on files in another web application project on the same server, and there it works as it should. Something must has happened to this particular application, but I cannot figure out what. Do you have any ideas on how to solve this?
I recently ran into some strange problems. Changes to files that are not code-behind (and not gets compiled to a DLL) should not require you to recompile the whole website, and this has never been I problem for me.These should actually get compiled dynamically when you first access the resource, e.g. the first time when browsing an updated aspx-page in the browser.
But yesterday, during development of a website, I noticed that even the smallest changes in html, javascript or anything in the .aspx-files doesn't get reflected when I save and reload the page in my browser.Rebuilding doesn't help either, actually I'll have to do a "Rebuild All" (in Visual Studio 2008) in order to see the changes. This applies to all aspx-files in my project.I tried with minor changes on files in another web application project on the same server, and there it works as it should. Something must has happened to this particular application, but I cannot figure out what.Do you have any ideas on how to solve this?
my solution in VS 2008, consisting of a dozen projects, does not compile because it gives me errors on constructors of a couple of classes, telling me that lacks the constructor that takes one parameter, which lacks the parameterless constructor, and so on.Actually I have all the correct constructors, and other times I compile without problems.I'm not understand why I have these random problems, that it is practically impossible to replicate.
View 2 RepliesI have been ising TFS 2010 with VS 2010 Ultimately for a couple of months now. I have a client who is using Visual Web 2010, does anyone know if this integrated with TFS easily?
View 1 RepliesI just recently upgrade my asp.net web project from visual studio 2005 to visual studio 2010. The upgrade was successful with no problems however im missing some features with this project. The One Click Publish feature(which is greyed out) in the header area of Visual Studio 2010 and the Add Config Transforms feature which is no where to be seen when you right click on web.config. When i create a new web project straight from visual studio 2010, these options work fine.
View 1 RepliesVisual Studio 2010 Beta 2 locked up, and when I tried to restart it, it wouldn't load, so I did a devenv.exe /resetuserdata to get it going again. It reset everyhing in my options of the web app/ etc, and now some AJAX conrols don't work such as dragpanel. I assume that it is because something got reset that I haven't enabled again, but can't figure it out.
View 2 RepliesIm working on a website project with Visual Studio 2010 from 2 different computers (home & work).
In Dreamweaver Im used to FTP to upload/download files to/from a webserver to syncronice my files on the current computer Im working on.What is best option in Visual Studio 2010 to sync project files between home & work computers? I have seen there is a built in FTP, but seems only it can upload files, limited functionality?
I want to use a source control in VS2010, I know my best bet is TFS, but at the moment TFS(can't afford ). As i understand TFS is the new VSS_2005(can afford)Can VSS 2005 be use as a source control for VS 2010 solutions/projects?
View 2 Replieswhen i opened my Visual Studio 2010 i noticed that my ajax tab was missing from my toolbox and ajax control kit too.Then i noticed even that when i create new website, there is no web.config in it and it should be.WHAT IS GOIN ON???? :/
View 13 RepliesIs it possible to migrate the application which is in visual studio 2003 to visual studio 2010. provide me details about how to migrate.
View 2 RepliesI have a site in production developed in 2005 and i am planning to migrate to Visual studio 2010. Is there an easy way to do it?
View 1 RepliesFrom where can I download Bootstrapper Manifest Generator for Visual Studio 2010?
View 2 RepliesEvery time I press F1 to view the online Help it launches in the Opera browser. I really dislike Opera and only have it installed on my PC for testing purposes. How do I change it to IE?
View 1 RepliesI am having an issue in VS 2010 trying to get even the default ASP.NET Web Application to run in Debug mode. I get the error:
"Unable to start program 'http://localhost:1443/Default.aspx'.
The system cannot find the file specified."
I am stumped here and cannot find anything out there with this error.
I am trying to convert guidance package of vs2008 to vs2010,
followed instructions as per this link {http://msdn.microsoft.com/en-us/library/ff697211.aspx}
and getting error as
Error 1 The "GenerateMenuResource" task failed unexpectedly....
I'm using visual studio 2010 professional, I dont what had happened but i lost my settings suddenly and the VS editor is generating a HYPHEN (-) everytime when i press SPACE BAR key..
I've tried restoring the settings, changing the settings from OPTIONS without any luck.