we are migrating a website from a proprietary system a new system built inSQL 2008. about 6,000 pieces of content with individual hard-coded aliases. How could we go about creating a match table to ensure these resolve with our new system (based on Intellgentsia URL rewriter)?
View 1 RepliesI have inherited an ASP.net website that was originally started back in 2007. I believe that a lot of the codebase was written in version 1.1, patched to 2.0 where necessary. The client is still not happy with some features and has requested changes to be made. In "peeling back the onion skin" I found that the codebase is rather outdated. I have asked and received approval to upgrade the entire application (website plus VB library) to ASP.net 3.5. Besides following the standard help instructions in VS 2008 and the advise of other posters on this site, can anyone direct me to specific resources to utilize in reviewing the 1.1/2.0 codebase and selecting the best 3.5 constructs that are most compatible? Do you favor the approach of converting the codebase in VS 2008, or do you start with a clean slate and copy/paste code where necessary? The original codebase uses Anthem and Free Textbox libraries. Do you favor upgrading these libraries to 3.5 where available, or are there other (free) libraries that will do a better job?
View 1 RepliesAt the moment I have to migrate a web-application (ASP.NET 2.0 with Masterpages) from IE6 to IE7/IE8. Where can I find hints and guidelines for this topic? The webapplication looks fine in IE6 but completely awful in IE7 and IE8. In IE8 I cannot see the compatibility button.
View 2 RepliesIf you started developing as a project, how difficult is it to migrate into a web site development process?
View 2 RepliesWe recently migrated from VS 2008 to VS 2010. The migration went fine, except for our web project. Before, in VS 2008, the site showed up as http://localhost/Website. Now, it appears as C:...Website. It appears that when we did the migration, VS started to treat it as a file system website.
I've tried removing the existing site and re-adding it as an existing website, but it still displays it as C:...Website. Is there any way to convert it back to show it as a http://localhost/website, and run through IIS, as opposed to the default ASP.NET Development Server?
My code works fine in Visual Studio 2008 but when I publish the website on same computer it doesn't work. Doesn't throw any exception. I'm using IIS 7.I'm trying to Dycrypt my a file using GnuPg.exe(GnuPg is already installed on my system and all the right Password and key.
Is it the persmission issue for user approaching from IIS? How should I fix this? System.Diagnostic.Process Code does not work after I publish my website
protected void Page_Load(object sender,
EventArgs e)
{
bool i = DecryptPGP(@"C:WebSite ryParListing_08102010.zip.pgp",
@"C:WebSite ry est.zip");
Response.Write(i.ToString());
}
[code...]
i tried adding reference of system.windows.forms dll to my web site. But it is not getting added. If i add a reference of a dll of another project inside the assembly that gets added. Is it not possible to add reference of a system dll in website?
View 1 RepliesI am currently creating a .NET based (website/system) solution for small IT companies and I am offering it in a self-hosted package, which means my clients are going to mainly install it on their own servers. How do I make sure my system is not being run except on one server per client and no body is illegally-copying it to other servers/machines?
View 2 RepliesCan I specify in web.config, or even programatically somehow, that anytime ASP.NET needs to login into SQL server that is use the DefaultAppPool account even if my Website is on the "File System"? What would I put in the web.config file?
<identity impersonation="true"> maybe? And what else?
The file system I'm publishing to is a not hosted by me, but by my university. IT here offers students their own web directory to host a website. My intention is to use it to host projects for classes and demo them for my professors. You can enter in a specific link in any browser to go to this website and view it as long as there is a file named 'index.html' in the directory with some presentable html code.
So here's the problem. I want my website to be written using ASP.NET and when I use VS2010 to publish my ASP.NET website to the 'File System,' I cannot simply open up my browser, type in the normal link, and have it display. It just shows up as a list of files in the directory and I can see all my source code for the web site
I want to create a comment system for users to comment on my Photos of Photo Galleries and videos in my Website. How i will create it using ASP.Net,C#,SQL Server?
View 1 RepliesI having the project in Vb i want to migrate that project in the vb.net. i have tried a lot.i have not installed the visual basic.
View 4 RepliesWe have a web site on customer server. It is being locked every 2 or 3 months. I posted this subject before. For understanding the error I created a log file. When the server locked I look the log file and saw "system resource exceeded" error message. Have you any idea about this error.. When restarting the server it continue.
View 5 RepliesNow I have WCF web.config problem. At first, I have parent website .net 2.0 "WebApp" which use "system.web.extensions" assembly.
<configuration>
configSections>
sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">
sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">
[code]...
Currently, I'm trying to do automatically sending mail system to my web-site.
This is how it shall work;
I keep , e-mail - sending time , pair at database , such as
example@hotmail.com , 10.30 PM
example2@yahoo.com , 06.00 AM
What i want is , sending a pdf attachment to these mails everyday when time is 10.30 PM and 06.00 AM . I've a function which creates pdf attachment. I've also a function which sends e-mail.
How can i always check if it's time for sending a mail or not ?
Problem Description: A person has to enter all his details and take a photo(While Taking his Snap in our website there will be a Image Component and we have to Initilize the Client System(Any Company Webcam)Webcam and below Image Component there will be a button(Take Snap) When he clicks on it , it should take his snap store it. After He fills all his details when he clicks on Save button, all the details along with that image should be Uploaded to the server.
1) How to Check Whether the Client has Installed any Webcam or Not First.
2) If the Client has Installed any Webcam then Initialize that Webcam When he clicks on Take Picture.
3) Stream that Video that is coming from that Webcam Inside our Image Control in Website.
4) After He Clicks on Save Image button that streaming should stop and still image should be saved.
5) Accessing that Image(Later Converting it to Byte Stream) and uploading Image along with his data to Sql Server.
In my system, the data access layer of one of the website is build using the enterprise library. Now I am developing another [different] website. How can I use the enterprise library to create the data access layer? I am very beginner to Enterprise Library? How can I configure it for my website? Should I have to include the DLL? How it will take the connection string from the Web.Config file?
View 1 RepliesI've a solution which consists of a web project and a class library project. The web project solution directly references a wcf service. There is a 2nd wcf service, but it is the class library project which directly references it. I'm adding the class library (output) as reference to my web project.
Hence in my web project's web.config I now have two scf services configured. This process was easy since I had manually copied the app.config (system.serviceModel part) directly to the web.config, and then configured the web project to talk directly with another wcf service (directly, not through any dlls).
My web project needs to talk to a 3rd web service (asmx). Again I plan to bring this as a class library and include the dll into my web project. (This is a separate solution). When I took a look at this particular class lib project's app.config, I thought i just copy those necessary sections and merge it correspondingly with my current web.config.
So for the 3rd class lib project (which references the asmx service) I happened to notice that it had, under the bindings node, a node called basicHttpBinding, and next, a customBinding. Then further under the client node, there were two endpoint nodes which had the service attributes. (I don't understand why there should be two end points here first of all).
So I copied what came under the bindings node (from the 3rd class lib prj app.config) and appended it to the bindings node (in the web.config). I did a similar process for copying the end points too. But now when I try run the web site I get an exception which halts at the time of initializing the soap client (asmx service): it says something like its not able to determine the endpoint for this contract.
The web.config before I add the asmx web service looks like this:
[code]....
I have recently developed a new vs2010 web application that I would like to add to my web site.
The existing website was developed using vs2008. The web site is hosted on a windows 2008 server running iis 7. My new web application sits below my main website i.e. mywebite mywebsite/mynewwebsite
I have set the application pools for the mynewwebsite to be asp.net v4.0, leaving the application pools for mywebsite as .net v2.0 If I try and open my new web application i.e. [URL] then I get 500. Internal server error. I assume that it is iis that is unhappy here. Do I have to rebuild the whole of my web site to be vs2010 using asp.net v4.0. If I do should I use ASP.Net v4.0 or ASP.net v4.0 Classic for my application pools, and should I have a separate and distinct application pool for each of my web applications ( I have 4 of these) Just to clarify my clients can log on the web site as
[Code]....
I am trying to create an instance of System.Web.HttpResponse to send the uers to another website.I am doing some other stuff in my vb.net that does not let me use the regular Response.Redirect.when I do Dim myRsp As System.Web.HttpResponse = New System.Web.HttpResponseit complains about a textwriter.
View 4 RepliesMy website is allowing the web.config file to be downloaded. However in my C:WINDOWSMicrosoft.NETFrameworkv2.0.50727CONFIGweb.config file I have this line
<add
path="*.config" verb="*" type="System.Web.HttpForbiddenHandler" validate="true"/>
Which should mean any config file can't be downloaded.
I have an application which has been built in MVC 2.0. I need to upgrade it to MVC 3.0 and that too by using Razor CSHTML engine. All the information which I got on the net was for MVC 3.0 Webform engine but nothing much for migrating to Razor.
View 37 RepliesI have an ASP.NET project that also uses a SQL MDF File. My target server is SQL 2008R2 or SQL Azure.I would like to know what deployment options I have as I migrate from DEV to PROD. In case it matters I'm not under any regulation to maintain PII or similarly private data.
View 3 RepliesCurrently we have a bunch of web sites (web site projects) that I think should be converted to web application projects. Everybody agrees.
But a number of custom BuildProviders are used to generate controls and unfortunately MSDN says that
Adding a customized BuildProvider class to the Web.config file works in an ASP.NET Web site but does not work in an ASP.NET Web application project
Are there some ways to migrate though without full discarding of custom BuildProviders mechanism?
main steps to consider while migrating 1.1 to 3.5 windows based applicatoin?
what are the steps need to consider at initially while planing for migration? as per i know this application i need to migrate like wsf and wpf and soon on.