Configuration :: Upgrading Website To Vs2010 And Framework 4.0 - Internal System Error 500 IIS 7.0?

Sep 3, 2010

I have recently developed a new vs2010 web application that I would like to add to my web site.

The existing website was developed using vs2008. The web site is hosted on a windows 2008 server running iis 7. My new web application sits below my main website i.e. mywebite mywebsite/mynewwebsite

I have set the application pools for the mynewwebsite to be asp.net v4.0, leaving the application pools for mywebsite as .net v2.0 If I try and open my new web application i.e. [URL] then I get 500. Internal server error. I assume that it is iis that is unhappy here. Do I have to rebuild the whole of my web site to be vs2010 using asp.net v4.0. If I do should I use ASP.Net v4.0 or ASP.net v4.0 Classic for my application pools, and should I have a separate and distinct application pool for each of my web applications ( I have 4 of these) Just to clarify my clients can log on the web site as

[Code]....

View 1 Replies


Similar Messages:

Web Forms :: Error After Upgrading Website To VS2010 ?

Jul 21, 2010

I struggling trying to insert the value I select from a "DropDownList1" country list into a TextBox inside a FormView1. I have tried the following but It wont insert the text:I also tested on a textbox1 outside the FormView1 and it works but just after clicking Cancel or Inser in the formView1.

[Code]....

View 7 Replies

Configuration :: Unable To Open Website - Internal Server Error (website Down)

Nov 6, 2010

My host moved my website to a new server. The DNS configuration is correct but the website is still down and I'm getting this message

"unable to open website at www.aboutmecfs.org. Internal Server error"

View 9 Replies

Configuration :: Internal Server Error Deploying Upgraded Website From 3.5 To 4.0?

Jun 8, 2010

I have a web site that has always run fine for years and years under 3.5. I converted it recently to run under 4.0, and it runs on Cassini fine. When I attempt to deploy the app to an IIS7 server that has 4.0 installed, all I get is "internal server error", and no error messages in the Event log, and nothing in the http logs.

I've double checked that the application pool I've deployed to is running 4.0.

It's an x64 web server and app (always has been while it was under 3.5.

View 5 Replies

Configuration :: Why Global.asax Error Is Occurring When Internal IP Check And Net App Managers Pings Website

Apr 23, 2010

When I run my app locally I get no errors. No error from Global.asax, no redirection to an error page. Everythings works fine.

When I deploy my app to a test server, my app run there with no errors. No error from Global.asax, no redirection to an error page. Everythings works fine on the test server.

But when I deploy my app to production server, the app runs fine but I keep getting errors (emailed to me) from Global.asax. On production server we have these security apps that run and keep hitting all URLs of the app on the server. Just to make sure they are working fine. When these security app hit URL of my app, my application runs fine but it gives out this global.asax error. The funny thing is that error is empty. The error are emailed to me and the email is empty. Nothing there.

There are several other apps running on the same server. My app has its own app pool and is configured correctly.

View 4 Replies

Configuration :: Upgrading Windows 2003 Server To Framework 2.0 SP2

Oct 25, 2010

We have multiple websites deployed onto Windows 2003 WebServer running under .NET Framework 2.0 SP1 version and now we want to upgrade it to .NET Framework 2.0 SP2, so just wanted to check that after upgrading the .NET Framework on the server do we also need to re-deploy the websites by recompiling them in .NET Framwork 2.0 SP2 version or it's not necessary as they will automatically start referencing the latest assemblies?

View 2 Replies

After Upgrading / Getting Contains Is Not A Member Of System.array Error

Aug 17, 2010

I have a website I developed in VS 2008 targeting .net 3.5. It has worked well. I recently upgraded to VS 2010 and needed to make a few changes to the site. However, I'm receiving compile errors (haven't made any changes to the code yet--was just launching the site to make sure it worked ok). I get "Contains" is not a member of system.array. Everything I've read states that the contains method was added in .net 3.5, which I know to be correct because it was working in VS 2008. I've been targeting .net 3.5 in VS 2010, but it still isn't working. I also used linq quite a bit with linqkit to do dynamic queries and all of my linq queries were saying my queries weren't queryable (I don't have the actual error in front of me). Anyway, to fix that one, I had to import system.linq (I previously had system.data.linq and it was working fine). To reiterate, I haven't targeted my site to .net 4 in VS 2010, I've left it targeting .net 3.5.

I tried converting my arrays to arraylists since arraylists were still pulling up with a .contains method, but then it broke my linqkit queries when I ran it on the site.

Here is my linqkit query:

Dim str() As String = archlist.ToArray(GetType(String))
Dim str3 As New ArrayList
str3 = ArrayList.Adapter(str)
predicate = predicate.And(Function(l As CompatTesting) str3.Contains(l.application.cpuarchitecture))

Before, I didn't have the arraylist conversion, I just had str.contains and it worked great to generate a sql "in" statement. Now after using the code above, the site launches, but when I actually run the code, I get Method 'Boolean Contains(System.Object)' has no supported translation to SQL. I also tried upgrading my linqkit dll to the latest version but it didn't help.

My questions are, since I'm targeting the same .net 3.5 framework in 2010, why is it not allowing me to use array.contains anymore? Maybe if I can address that issue, it will fix my linqkit issue where it says "contains" has no supported translation to sql.

View 1 Replies

Configuration :: Moving Website Files On SAN For Upgrading

Jun 4, 2010

We currently have two web servers that are load balancing a website. Each server at the moment has its own copy of the site on their own hard drives. We have recently installed a SAN thats accessible by both servers so what I would like to do is move the website files on to the SAN for easy management of upgrades to the site. What steps should I take to ensure this works correctly with IIS7 and the web.config files and possibily machine.config files. For additional information the web.config's on each server is currently encrypted, how would I be able to achieve this with a SAN?

View 2 Replies

Visual Studio :: EntityDesignerBuildProvider Error In System Web.config When Upgrading ?

Apr 13, 2010

My web site used ASP.NET 3.5 SP1, MVC 2, and EF. Last night I tried to upgrade to ASP.NET 4 (& EF4) under VS2010.

If my views are compiled (MvcBuildViews property is true), then the build fails with this error message:
Error 5 Could not load type 'System.Data.Entity.Design.AspNet.EntityDesignerBuildProvider'. C:WindowsMicrosoft.NETFrameworkv4.0.30319Configweb.config 129

It's actually complaining about my system web.config file.

If MvcBuildViews is false, then it will run (and compile the views normally just fine).

OS: Server 2008 R2, all updates applied at time of writing.

View 4 Replies

Configuration :: Framework 4. Not In Build Dropdown Vs2010?

Feb 11, 2011

my clients PC has framework 4.0 installed and my web app runs in IIS 7 configured to use framework 4.0.

but for some reason when i open the same app in VS2010 it says that the app is running in framework 2.0??

when i open the startup options and go to build, the dropdown for the framework does not have framework 4.0 as an option only goes up to 3.5?

View 1 Replies

Configuration :: Getting Error Connecting To Database After Upgrading To .net 4.0?

Aug 22, 2010

I upgraded a Website to use ASP.NET 4.0, from 3.5. This involved setting it up on a different server, with the same hosting company. I'm using a shared hosting plan on Windows Server 2008.

Since migrating, it gives an error message when I try to login to the site:

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

I'm using the same connection string as I did in the old version, which always worked. I also changed the permissions for the database to allow connections from the redeployed Website, via the host's control panel.

I have searched the web.config, and the source for the site, and I haven't been able to find a connection string that looks incorrect.

I've contacted the host about it, in case it is a configuration issue on their side.

View 2 Replies

Configuration :: HTTP Error 500.0 - Internal Server Error When Using .NET 4?

Apr 20, 2010

I am currently trying to setup our website on a windows 2008 R2 64bit machine without much success. When I try to run the website I get the error detailed below. This only happens when I run the site under .NET 4. It works when I run it under .NET 2.

I have also tried going to a test aspx page to see what happens and it also give me the same error so it is obviously something to do with .NET 4 or the way I have it set up. I am thinking it might be a permissions thing but I am not sure what permissions should be set where. Please note this is the full version of .NET 4. The error I keep getting is:

HTTP Error 500.0 - Internal Server Error

An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.Detailed Error Information

Module AspNetInitClrHostFailureModule
Notification BeginRequest
Handler PageHandlerFactory-Integrated-4.0 [code]....

Most likely causes: The module could not be found.IIS received the request; however, an internal error occurred during the processing of the request. The root cause of this error depends on which module handles the request and what was happening in the worker process when this error occurred.

IIS was not able to access the web.config file for the Web site or application. This can occur if the NTFS permissions are set incorrectly.

IIS was not able to process configuration for the Web site or application. The authenticated user does not have permission to use this DLL.

The code in the test.aspx is
<%@ Page language="vb" %>
<html>
<body> [code]....

View 9 Replies

Configuration :: HTTP Error 500.19 - Internal Server Error?

Mar 22, 2011

I try to upload web application to the server. After that I access it through http://..., but get

[Code]....

I search on the web, and add IIS_IUSRS to security of the folder of web application, and upload again. But still get same error. I need help on this,

View 2 Replies

IIS Configuration :: HTTP Error 500.19 - Internal Server Error

Sep 20, 2015

the same application is working fine in 32 bit machine of my colleague where as in my  64 bit machine I am getting the following error. I also tried by changing Target Platform of the web app, under Properties-->Build-->Platform Target: From X86 to X64, in fact I tried all 3.

 HTTP Error 500.19 - Internal Server Error
 
The requested page cannot be accessed because the related configuration data for the page is invalid.
Detailed Error Information:

Module
IIS Web Core
Notification
BeginRequest

[Code]....

Config Source:

18:     <validation validateIntegratedModeConfiguration="false"/>  
19:     <handlers>  
 20:       <remove name="ChartImageHandler"/>

More Information: This error occurs when there is a problem reading the configuration file for the Web server or Web application. In some cases, the event logs may contain more information about what caused this error.

View more information »

View 1 Replies

Configuration :: Running Framework 2.0 Application Within Framework 4.0 Website

May 18, 2010

I host a website that has recently been upgraded from .NET Framework 2.0 to .NET Framework 4.0. Within the website, I have an instance of BlogEngine which still requires .NET Framework 2.0. Each website is in it's own application pool. My issue is that when I browse to the blog portion of my website, I receive a 500.19 error with the following information...

The configuration section 'system.web.extensions' cannot be read because it is missing a section declaration The web.conf file that is listed in the error message is the config file that belongs to my root website which is running .NET Framework 4.0. How do I get the two websites to run together in the same website using different versions of the .NET Framework?

View 2 Replies

Deploying Website - 500 - Internal Server Error?

Mar 22, 2011

I first time tying deploy ASP.NET MVC3 Web App and after upload files and made database I had problems with diplaying sites...I was redirected to "page not found'. After add to web config I get following error:

Server Error 500 - Internal server error. There is a problem with the resource you are looking for, and it cannot be displayed. What I need to do now?

View 3 Replies

MVC :: Deploying Website - 500 - Internal Server Error?

Mar 22, 2011

I first time tying deploy ASP.NET MVC3 Web App and after upload files and made database I had problems with diplaying sites...I was redirected to "page not found'. After add <customErrors mode="Off"/> to web config I get following error:

I first time tying deploy ASP.NET MVC3 Web App and after upload files and made database I had problems with diplaying sites...I was redirected to "page not found'. After add <customErrors mode="Off"/> to web config I get following error:

Server Error

View 6 Replies

Configuration :: Internal Error Resource File Not Found?

Sep 16, 2010

I am developing an application which is running fine on local machine. It is using webservices and jquery's ajax to call that service. It also has some asp hidden fields. I deploy it with visual studio. It is giving me error that the resource I am looking for is not found.

View 2 Replies

Configuration :: Debugging Internal Server Error After .net 4 Upgrade?

Jun 7, 2010

I've got two sites hosted on a win2008R2 box that I just moved to .net 4 from 3.5. One worked well, but the other is showing a 500-internal server error on the server. It builds fine in VS, and runs fine in Cassini.I've changed the app pool to .net 4 and copied the new web config into the site, but I still get an error. I did this about a month ago with another site and everything worked fine.I can't use my own error logging code because my app doesn't even get started, and IIS doesn't seem to leave anything in the application event log. Apologies in advance for a dumb question, but where can I get some more detail on this error?500 - Internal server error.There is a problem with the resource you are looking for, and it cannot be displayed.

View 8 Replies

Configuration :: 500 - Internal Server Error. There Is A Problem With The Resource You Are Looking For?

Sep 21, 2010

Totally new to ASP.net and IIS 7.0

-company setup a new web server with IIS 7.0

-ASP.NET Impersonation, Windows & Basic authentication all are enabled

-web server is in STARTED status

-asp.net web site runs ok on my machine in vs2005, created a deploy project and deployed to my computer, ran msi file, and copied that folder to web server that has IIS 7.0

-asp.net web site web.confg has windows authentication and included identity impersonate="true".

This is newly setup web server and has not been used for hosting ASP.net web site before. If have disabled in IE the "Show friendly HTTP Errors Messages" to get what error really is. I can ping the server.

View 2 Replies

DataSource Controls :: System.Data.SqlClient.SqlException: SQL Server Internal Error - Text Manager Cannot Continue

May 15, 2010

[Code]....

View 1 Replies

MSBuild Failing To Build Referenced Projects When Upgrading To VS2010?

Dec 8, 2010

I have recently upgraded my .Net 3.5 solution containing some C# code projects and a ASP.net web site project to VS2010 (from VS2008). It is building and running fine inside VS, but I get some problems when trying to build it on my server with MSBuild 4.0 via TeamCity. It seems like the projects that are referenced from the web site are not built. This was all working fine before I upgraded to VS2010, MSbuild 4.0 and Windows SDK 7.1.

Inside the msbuild script that I use to build from teamcity I have defined project references for the web site like this:

[code]...

When I try to run the build script I get an error message saying that it could not find the dll file when trying to copy it from the bin folder of the referenced project into the bin folder of the web site. This is happening because the referenced projects are in fact never built at all (No bin folder exists in the project dir).

I am not very experienced with MSbuild, so I may have overlooked some important stuff. Is it not so that MSbuild will automatically try to build the referenced projects if no project output is existing?

View 1 Replies

Configuration :: GoDaddy 500 - Internal Server Error Only On Stats Folder?

Dec 4, 2010

I have deployed my website/app on GoDaddy hosting and am getting this Internal server error message only when trying to view the /stats folderI have forms authentication on, and when I try and visit this folder I get redirected to my CMS login page which is really strange. When I disable authentication I then get this internal server error.Anyone ever experience something like this? GoDaddy support don't and never seem to a have a clue about anything.

View 1 Replies

Web.config And Mime Types - Website Starts Showing Internal Error?

May 13, 2010

I want to add mime type in web.config to make downloading files for users.but after adding mime tag, website starts showing internal error 500 and removing this, it runs fine but when user click on files to download then it show error that file not found. So I need to add proper mimetype for my uploaded files. So pls tell me the proper way to add it to web.config file.

View 3 Replies

.net - Upgrading 1.1 Framework To 4.0?

Aug 13, 2010

if i need to upgrade one version at a time (2.0, 3.5, 4.0) or if I can just directly from 1.1 to 4.0?

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved