I am using the below code to export gridview to PDF
form1.Controls.Clear();
form1.Controls.Add(GridView1);
StringWriter sw = new StringWriter();
[code]....
I have checked that grridview has 10 rows by putting breakpoint. But I am getting error at
document.Close();
that
The document has no pages.
I want to use jQuery in my ASP.NET 3.5 website that uses master pages and content pages. How do I do document ready() functions for the child pages for those that will use jQuery ? Where do I put the code?I figured the jQuery declarations should go in the master page, but don't know how to make sure any jQuery calls go into the HEAD of the resolved page.
View 3 Repliesi refer u r code but it given m error as The document has no pages.
View 1 RepliesI am referring u r Code for exporting grid in PDf [URL] ... but in my aspe page contain HTML table and Gridview So it give me error as The document has no paging I am not able to understand why it given me this error ...
View 1 RepliesI am running into a problem with the btnPdf.on pdfDoc.Close it gives me an IOException was unhandled by user code.. The detail is The document has no pages.. I have a populated grid.. The only changes I made were to change the filename to filename LotGrid.pdf and the grid name to the name of my gridview..
View 1 RepliesIt seems liken no matter what logic I put in my code, this runs every single time, and because of this, unless I am viewing this particular content page, I get an error.
View 13 RepliesThe pages on my project are base on master and content pages...
I want to do something with javascript(rather than jquery) in one of content pages after ALL OF MASTER AND CONTENT ELEMENTS ARE LOADED COMPLETELY.(for example set focus on a RadComboBox Control)
For doing that I used the below code :
<asp:Content ID="Content1" ContentPlaceHolderID="head" runat="server">
<script src="../JQuery/jquery-1.4.1.js" language="javascript" type="text/javascript"></script>
<script type="text/javascript"> [code]...
But alert(combo); always returns null.(the $find code is for telerik controls and the upper codes about telerik controls are completely true)To solve this null problem I test the ways shown below:
1-I Removed all of controls from master and content page except RadComboBox Control and null problem disappeared , so i derived the null peoblem is about all of elements of master and content page have not been loaded when
$find("<%= RadcbPersonelCompleteNameInvwNoskhehEdit.ClientID %>"); is fired.
2-so i used $(document).ready(function() { my codes }); instead of onload = onloadOfDocument;
3-at last i test the below code and it works perfectly :
<asp:Content ID="Content1" ContentPlaceHolderID="head" runat="server">
<script src="../JQuery/jquery-1.4.1.js" language="javascript" type="text/javascript"></script> [code]...
What function of document should i use for doing some javascript codes after all Of MASTER AND CONTENT ELEMENTS are loaded completely?
i am using visual stdio 2005 and sql server 2005 for making a apllication
i want to save user's doc,docx file in database and show the uploaded user doc ,docx file in asp page
<iframe src="http://docs.google.com/viewer?url=filename&embedded=true" style="width:600px; height:600px;margin-left:20px;" frameborder="0"></iframe>
I am using above code to show our document online.
But when we inspect element it is showing url of file which we dont't want.
it is possible to hide this url or any other alternate to show our document to user without exposing our physical file path.
I have xml document and wanting to pass it through wcf restfull service, i am able to do that by using string format i mean i can pass the xml as string param in the restful service and it worked but now my xml document becomes huge so if i pass it as string then it gives URI long error. any way i can pass the huge xml document through the WCF RESTFul service.
View 1 RepliesI want when user upload a doc file it convert into pdf. How can i do this. I read that itextsharp convert it.
View 1 RepliesI am launching a pdf document using either:
1. Response.Redirect("filepath/document.pdf"), or
2. Response.ContentType = "Application/pdf"
Response.WriteFile("filepath/document.pdf")
Response.End()
Both methods successfuly launch the PDF document displaying the document path and title in the title bar. For security reasons I'd like to HIDE the document title. Can someone advice how this can be done? (How can a PDF document be launched without showing the actual document's name)
I want to convert to Word Document in a PDF document. I do not want to use any third party control. I want to do it on my own. Can somebody tell me how to start with it?
View 7 Repliesi'm developing a site using VS2010 and with my windows vista busniness OS. i used the default VS2010 wizard for new web application to create it. included a folder in the root directory and created new aspx pages to derive from the master page in the root directory of my site. everything shows on the new pages except the jpeg image logo in the master page. But other aspx pages i created in the root directory shows every thing fine.
View 1 RepliesPage B - loads slowly and needs to do some CPU-intensive operations on the web server.
I noticed that when someone is loading Page B, then Page A also loads slowly. This is even worse if multiple users are loading Page B at the same time. Page A won't finish loading until Page B is done.
Is there a best practice for making sure that Page A can still load quickly? Maybe a config setting or IIS setting that I need to change from its default? With 2 users loading Page B at the same time, the web server CPU usage only gets to 30% so I suspect it might be something I can tweak with the settings.
Currently I'm doing common functionality required throughout my site inside of my masterpage. What I want to do is move this functionality to a BaseClass so All my pages inherit from the Base Class. However, I'm not sure how to set this up interms of c# code with regards to Using a Base Class and then having a masterpage applied to my aspx pages that i create.
View 5 RepliesIn my Application_BeginRequest I have code that gets query string value ?c=FR or ?c=US and store it in cookies.Based on query string value I have either US or FR,locale is selected from locale table.If ?c=FR then locale will be fr-FR and if it is US then locale will be en-US.My code is below.
void Application_BeginRequest(object sender, EventArgs e)
{
LocalizationInfo loc = GetLocalizationInfo();
if (Request.Cookies["Localization"] == null)
Response.Cookies.Add(new HttpCookie("Localization"));
Response.Cookies["Localization"]["Country"] = loc.Country;
CultureInfo objCI = new CultureInfo(loc.Locale);
Thread.CurrentThread.CurrentCulture = objCI;
Thread.CurrentThread.CurrentUICulture = objCI;
}
public static LocalizationInfo GetLocalizationInfo()
{
string countryCode = "";
string sLocale = "";
if (HttpContext.Current.Response.Cookies["Localization"]["Country"] != null)
countryCode = HttpContext.Current.Response.Cookies["Localization"]["Country"];
if (!string.IsNullOrEmpty(HttpContext.Current.Request.QueryString["c"]))
countryCode = HttpContext.Current.Request.QueryString["c"];
if (countryCode == "")
countryCode = "US";
sLocale = HertzRent2Buy.DataProvider.ListData.GetLocale(countryCode);
LocalizationInfo ret = new LocalizationInfo();
ret.Country = countryCode;
ret.Locale = sLocale;
return ret;
}
public struct LocalizationInfo
{
public string Country;
public string Locale;
}
Now when I run the project and in query string I set [URL] then for the very first page(home page itself) it shows me French translation,but on subsequent page,that query string parameter ?c=FR is lost and hence it shows be English translation not French translation since it does not pickup French resx file.If I manually append ?c=FR in subsequent page then it shows the French translation.Is there is way how I can make that query stringparameter available in all pages.Structure is there to hold Country and locale variables. In all pages I am calling GetLocalizationInfo() method as follow
LocalizationInfo info = some.DataProvider.Globalization.GetLocalizationInfo();
And I create instance info to pass locale and country as parameter. GetProductDetails(id,info.Country,info.locale). why my query string parameters get lost on subsequent pages.
When i'm trying to debug or view pages of my site in browser asp.net dev server doesn't turns on pages automatically and when im trying to go by url it throws me an error See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.ComponentModel.Win32Exception (0x80004005): Не удается найти указанный файл
at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start()
at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
at Microsoft.VisualStudio.WebServer.WebServerForm_DAL.DoLaunch()
at Microsoft.VisualStudio.WebServer.WebServerForm_DAL.OnLinkClickedHyperlinkLinkLabel(Object sender, LinkLabelLinkClickedEventArgs e)
at System.Windows.Forms.LinkLabel.OnLinkClicked(LinkLabelLinkClickedEventArgs e)
at System.Windows.Forms.LinkLabel.OnMouseUp(MouseEventArgs e)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)............................
I have a few pages that are completely static. They only change at build time. But they are expensive to create. For the ones that are kind of expensive to create, I cache them for very long times using the ASP.NET output caching. But for one page, I really want it cached forever and ever or until the the next build.
What is the most expedient way to make this happen? Is there a build in feature that achieves this or a 3rd party tool?
(yeah, for the moment I plan to do the "view source" and copy paste thing, which isn't a very elegant build step)
I have added a jquey menu in my master page its working fine for those asp.net pages which are at the same level as master page.
But this menu isn't working at all for all of those page which aur in Editor's and Admin's folder. In these pages menu is displaying as simple html menu and unfortunately no jquery effect is shown on it.
I'm very confused why this menu isn't working for the pages which are in a seprate folder while the master page is added at the root level outside of all these folders.
How can we add titles to each content pages which inherits from mater pages in asp.net?
View 1 RepliesMy requirement was to share master files among diff projects i read this doc [URL] so i use this technique to share msster pages among my diff projects in a soln but i dnt know how to reference such shared master page as if i use such
<%@ Page Language="C#" AutoEventWireup="true" MasterPageFile="../masterPages/masterInvGen.Master"
How do you implement SquishIt to bundle Css/Js across View Pages and Render it in the Master page? I thought I could use a ContentPlaceHolder above the Render portion, but there seems to be some odd behavior where it sometimes adds 3 files (1 in the view page and 2 in the master page) but other times will ignore the file added from the View Page.
Index.aspx
<asp:Content ContentPlaceHolderID="CssFiles" runat="server">
<% CssHelper.Add("home.css"); %>
</asp:Content>
Site.master
<asp:ContentPlaceHolder ID="CssFiles" runat="server" />
<% CssHelper.Add("reset.css"); %>
<% CssHelper.Add("master.css"); %>
<%=CssHelper.Render() %>
My current solution is a Static wrapper around SquishIt's static Bundle class that keeps the BundleBuilder in HttpContext.Current.Items.
I'm curious if this has been done successfully and how so.
Is it possible with ASP.NET Master Pages to create content pages dynamically?That is, I know we can create content dynamically, but the content pages themselves,can those be created programmatically? I want to give my users the ability to define new content pages (i.e. Categories: Sofas, Tables, Lamps, and add/delete as they see fit) through a management panel. The resulting content pages should have proper URL naming, so that they index properly.An example: http://www.example.com/products/Lamps/contentpage.aspx.Is there a demonstration of this somewhere I can view?
View 4 RepliesWe run a PHP-website through IIS v6.0 (windows server 2003). The site was configured by an ex-collegue. Now I have to add a couple of existing
ASP-pages to the site. I have tried this, but it won't work. When calling an ASP page in Internet Explorer, we get the following message : "The page cannot be found". However, if I rename the asp-pages to php, it does work fine, but this is not the way I want it to work (I like to keep the asp pages, to be sure they work well). Can one configure IIS so ASP pages can run aside our existing PHP-pages ?