Viewstate Lost On Postback For .net Sitecore Page?
Oct 27, 2010
I'm getting some strange behaviour with viewstate being lost on postback for a .net application using Sitecore. I'm assuming it might be some config variable somewhere but I'm new to Sitecore and don't really know where to start looking.
UPDATE: Sitecore has now gotten back to us with an answer. We had recently added the dtSearch module, and AutomaticDataBind was set to true in the dtSearch.config which overrides the setting in the web config. We've now removed it and it works fine again.
I've made a mini test if that might help. It's two usercontrols on one page, both with a repeater. When updating the viewstate gets lost so even if I'm binding the updated repeater again the data for the other one will be lost.
Usercontrol 1:
<asp:Repeater runat="server" ID="Repeater1" OnItemDataBound="Repeater1_ItemBind">
<ItemTemplate>
<li>
<asp:Literal runat="server" ID="Literal1"></asp:Literal>[code]....
what might be going on? Let me know if I need to provide any more information. The most annoying thing is that it was working last week but I have no idea what has changed!
View 2 Replies
Similar Messages:
Jan 13, 2011
I have a simple search page with a drop down list that I would like the value to persist on refresh..basically the user will select their location from the dropdownlist and this will be used to populate a gridview. After this the page is set to refresh at a set interval and use the same location data initially selected by the user. However the initial selection is lost each time the page refreshes.
p.s system is to old for ajax!
<meta http-equiv="Refresh" content="300" />
<script runat="server">
Dim connectionString As String = ConfigurationManager.ConnectionStrings("****").ConnectionString
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs)
If Not IsPostBack Then
Dim conn As SqlConnection
conn = New SqlConnection(connectionString)
Dim Locationcommandtext As String
Locationcommandtext = "SELECT * FROM [Location] ORDER BY [Location]"
Dim loccomm As SqlCommand
loccomm = New SqlCommand(Locationcommandtext, conn)
Dim reader As SqlDataReader
Try
conn.Open()
reader = loccomm.ExecuteReader()
Locations.DataSource = reader
Locations.DataValueField = "LocationID"
Locations.DataTextField = "Location"
Locations.DataBind()
Catch ex As SqlException
Response.Write("SQL Error:
" & ex.ToString())
Finally
conn.Close()
End Try
Else
'"Viewstate should kick in here"
End If
End Sub
</script>
View 6 Replies
Apr 26, 2010
I have a ascx page on load of the page I save few data in the HttpContext Session, on selection of data in the screen I reload the page with relevant data for the selection. Until here the data in the session exists. But on click of a button say ok button to navigate to next page. all the data in the session is lost. But the same works in windows 7 and windows server 2008 not in windows XP. are there any configuration difference in windows 7 and XP.
View 1 Replies
Apr 26, 2010
asp.net session data lost on postback of the page in windows XP.
View 4 Replies
Mar 14, 2011
I have an ASP Wizard control. On my first step I have two listboxes, The first listbox item is populated from the server, when the page loads.User then selects data from ListBox One and Moves it to ListBox2. Then clicks on the NEXT button of the wizzard. Somehow when the user clicks on next the ListBox2 is empty.I use jquery to move data from ListBOx1 to ListBox2.
[Code]....
View 2 Replies
Feb 12, 2010
I have a problem with ViewState. I have an aspx page that has a treeview on the left and an UpdatePanel with an ASP.NET Panel inside on the right. It is in that inner Panel where I load and unload dynamically user controls. I use that update panel to load dynamically controls.
I also made a custom control for my user controls because I need to pass some values from page. On that constructor I use ViewState to store these values.
The first time I load the user control I call its constructor with parameters. When I reload that user control on each postback I use its normal constructor.
My problem is I the values I've stored on ViewState has become null on successive postback.
Update:
This is a piece of my user control:
public class MyUserControl : System.Web.UI.UserControl
{
private int PKId
{
get { return ViewState["pkId"] as int; }
set { ViewState["pkId"] = value; }
}
public MyUserControl(int pkId)
{
this.PKId = pkId;
}
...
}
I'm following this article to load controls dynamically: http://msdn.microsoft.com/en-us/magazine/cc748662.aspx#id0070065.
Second Update:
I also set the same control ID when I load the user control at first time and on each reaload.
Maybe I can use another method to store these values like input hidden fields or Cache. I've choosen ViewState because I don't want to overload server with Session values for each user.
Third update:
I load the controls with this code:
System.Web.UI.UserControl baseControl = LoadControl(ucUrl) as System.Web.UI.UserControl;
if (baseControl != null)
{
baseControl.ID = "DestinationUserControl";
PanelDestination.Controls.Add(baseControl);
}
And reaload with this code:
DynamicControls.CreateDestination ud = this.LoadControl(TrackedUserControl) as DynamicControls.CreateDestination;
if (ud != null)
{
ud.ID = "DestinationUserControl";
PanelDestination.Controls.Add(ud);
}
View 4 Replies
Mar 16, 2011
just wanna ask if ASP.NET has a Module and Class file also. I used module and class file in every windows application that Im making so that my code is reusable. Does ASP.NET have this also. And ow, someone told me not to use this kind of method.
Code:
Public ReadOnly Property Username()
/ CODE Here
End Property
Cause he said the value of it will be lost every postback, why is that ?
View 4 Replies
Mar 3, 2011
which are the control/thigns in asp.net whose value is lost on page postback.
View 5 Replies
Mar 8, 2010
One of my functions in a class is called GetIpAddress() which returns the following string:
System.Web.HttpContext.Current.Request.ServerVariables["REMOTE_ADDR"]
This all works well in regular page loads and gets my ip address, but when i for example let a user place a comment, then the ip address is lost after postback and i get an empty string returned.
View 2 Replies
Mar 3, 2011
I have an .aspx page which consists of 5 tabs. Each tab content is a .ascx page. i.e. i have 5 ascx pages and on the click on eachtab i load the particular ascx page for that tab. Consider i have one textbox and one button on each of the 5 ascx pages. When i type something in each of the textbox and when i traverse to other tabs the data remains on the textbox on all the pages. But when i click on the buttons on any of the tabs , postback happens and the data is lost. Now what i want is consider i type "Mark" on my txt1 on tab1. and i type "steve" on my txt2 on tab2. When i click on the button on tab1 and traverse to tab 2 i want the data to stay on tab2?
View 4 Replies
Mar 12, 2010
I have a hiddenfield, which I want to save the scroll position of asp.panel scrollbar during postback, and when during postback this value is called back to set the scroll position.
Using javascript I can grab the value from the scrollbar, and assign it to the hidden field, but when I post the page back the value has gone.
Here is my code snippet:
<script type="text/javascript" language="javascript">
function SetScroll(val) {
[code].....Am I missing something? How do I keep the value during post back?
View 27 Replies
Feb 4, 2010
I have a problem
<script language="javascript" type="text/javascript">
View 2 Replies
Mar 29, 2010
I am using an asp:upload control to upload an image and am using the postedfile property to insert the path to the database. In my form I have a dropdown with autopostback=true where the user can select a topic to populate a checkbox list of categories. During that postback, the postedfile value is being lost and after a little research I have discovered that the posted file value is not maintained in viewstate for security reasons.
View 4 Replies
Apr 30, 2010
I have been getting this error a lot lately with some of my users, and I had a couple of concerns with view state and I have read so many articles but I am still lost..
1. I use masterpage on all the pages and I need viewstate for some of the pages but..
There is a page where a user will fill out the information and then submit this data to a cgi server, and it is where I get most of the Client Disconnected errors, what would happen if I disable viewstate when they click on that button?
Now when a user browses from one page to another, does the view state from the previous page get deleted? If not how would I delete it?
Does the master page have its own viewstate? Would I be able to make sure none of items on my master page are using the viewstate?
View 7 Replies
Sep 24, 2010
I have a shopping cart page (Cart.aspx) that has a button that will (sometimes) post to a third party payment gateway, if payment is necessary. The payment gateway will process the payment and then do a silent post to my website (Order.aspx) so I can update the order status.
Order.aspx always throws an invalid viewstate error, even though viewstate is disabled on the page.
What's happening is that Cart.aspx (which has viewstate enabled) posts to the payment gateway, and the gateway will post it back as part of the silent post. Even though Order.aspx has viewstate disabled and validation disabled, it still tries to validate the __viewstate field it's being given.
I know setting EnableViewState=false will disable the rendering of the __viewstate field, but if another page provides the field, shouldn't it still skip validation? I tried calling ViewState.Clear() on the Page_Init event of Order.aspx, but ViewState is apparently empty. how to get around this? I don't want to disable ViewState on Cart.aspx (in some cases it may be necessary), but I can't figure out how to clear it on Order.aspx.
View 1 Replies
Feb 24, 2010
dynamically created style of a panel. On postback the style of the panel is getting reset to its design time style. I am assigning the style of this panel using javascript. on dropdowlist's index change, its getting reset.
View 3 Replies
Mar 7, 2011
I have an accordion which gets dynamically populated in code behind.on postback, it just shows the accordion has zero panes. [Code]....
[Code]....
View 1 Replies
Jun 7, 2010
I'm evaluating using Ajax in a new project and so I've developed a simple web page to test a few things, however even the simplest task seems to cause my session to be cleared. I am using VS2008 with .Net 3.5 SP1 and the page is in my existing solution which has several custom handlers and modules in the web.config. Below is the code I'm using, it's a simple test which puts a variable into the session then on the buttons postback tries to get the same variable, however it always fails as the session is blank.
The Default.aspx code snippet
<form id="form1" runat="server">
<asp:ScriptManager ID="ScriptManager1" runat="server" /> [code]....
View 1 Replies
Feb 15, 2011
I have a page to wich I had several controls dynamically. When the page is posted back via Ajax, the values of the dynamically control do not make it server side. However, everything works well if the page is posted back in the normal way ( without Ajax).
I need the post back to be done via Ajax because I need to use the Callback function to perform other tasks in the UI once the call returns.I found this excellent article but it doesn't discuss ajax:
http://www.4guysfromrolla.com/articles/092904-1.aspx
View 17 Replies
Mar 10, 2011
I've got an application that uses jquery ui datepicker on an asp.net textbox control.The control is working as intended, but I've noticed that when you postback from a server call (via submit button), the entered value gets lost in the application.Was wondering if you all have experienced this? And what measures that you have to do to prevent this?Here is my code:HTML:
<asp:TextBox runat="server" ID="txtCallsMadeFrom" class="field" EnableViewState="true">
JQuery:
var callsMadeFromId = '#<%=txtCallsMadeFrom.ClientID %>';
jQuery(callsMadeFromId).datepicker({ showOn: "button", buttonImage: "../images/calendar.gif", altFormat: 'dd/mm/yy', buttonImageOnly: true, onSelect: function () { } });
View 2 Replies
Dec 22, 2010
I have a asp.net page with a button, the event the button needs to perform on it's click event needs to vary, dependant on what options are selected further up the page. The button itself is included in the master page, and it's actions are affected by selections made in the child page.
To do this, I have a method in the master page, that is called by the child page, when a users presses a button, that passes the Eventhandler to be used by that button, that is then assigned to masterpage eventhandler for that button:
public void assignEvent( EventHandler saveEvent)
{
this.SaveButtonEvent+= saveEvent
}
Then, when the save button on the master page, it calls that eventhandler
protected void save_Click(object sender, EventArgs e)
{
if (this.SaveButtonEvent != null)
{
this.SaveButtonEvent(this, e);
}
}
The event handler is assigned ok in the first section of code, however because pressing the save button causes a postback, the SaveButtonEvent event handler is set back to being null, and so nothing happens.
How can I preserve the contents of SaveButtonEvent Event Handler during postback, or is there a better way to be doing this?
EDIT:
I can get this to work by saving the EventHandler to the session, but this doesn't seem like a great idea.
View 1 Replies
Aug 10, 2010
I create a class with some atributes.In a web form, I declare a public object like this.Partial Class Intencion
View 7 Replies
Nov 18, 2010
I am working on an ASP.NET application (well supposed to be deploying it about 3 days ago) and my hidden fields are loosing value when the form gets posted back..
I am using them to store information i write using javascript and on my own machine this works fine but as soon as i deploy it on our server everything else works except these values are lost..
I am using the .NET AJAX control toolkit on the same page and have noticed my calander datepicker also looses the data..
I have checked using firebug and the data is definitely getting post to the server but is getting lost somewhere!
View 1 Replies
Sep 10, 2010
I have a gridview control that extends the default gridview. I have added an attribute called "hiddenSelectedValues" to to the gridview during the "PreRender" event and I have a private variable that points to the value of that attribute.I have some javascript code that modifies the value of this attribute based on the user checking or unchecking checkboxes in the grid. I have confirmed that the javascript is indeed modifying the value of the "hiddenSelectedValues" attribute by using Firebug to see the change as it happens.
However, once a postback occurs, the grid looses the updated value of this attribute and I am unable to reference get the updated value on the server side.How do I keep the value of an attribute changed by javascript on postback?
View 1 Replies
Feb 25, 2016
I have the problem with dropdownlist value inside gridview.my problem is i have textbox,button with two dropdownlists, dropdownlists are inside gridview.Two dropdownlists are one is ddlcountry and another one is ddlstates. if i select country from ddlcountry , country related states comes in ddlstates. after entering first record value in textbox then button click textbox value is shown in gridview with two dropdown lists dropdown list, after selecting one dropdownlist country and states, i enter second record value and button click then only country selected value visible ddlstates selectedvalue not visible in first record in gridview...
View 1 Replies
