C# - Page With ViewState Disabled Still Be Validating A Viewstate Field?

Sep 24, 2010

I have a shopping cart page (Cart.aspx) that has a button that will (sometimes) post to a third party payment gateway, if payment is necessary. The payment gateway will process the payment and then do a silent post to my website (Order.aspx) so I can update the order status.

Order.aspx always throws an invalid viewstate error, even though viewstate is disabled on the page.

What's happening is that Cart.aspx (which has viewstate enabled) posts to the payment gateway, and the gateway will post it back as part of the silent post. Even though Order.aspx has viewstate disabled and validation disabled, it still tries to validate the __viewstate field it's being given.

I know setting EnableViewState=false will disable the rendering of the __viewstate field, but if another page provides the field, shouldn't it still skip validation? I tried calling ViewState.Clear() on the Page_Init event of Order.aspx, but ViewState is apparently empty. how to get around this? I don't want to disable ViewState on Cart.aspx (in some cases it may be necessary), but I can't figure out how to clear it on Order.aspx.

View 1 Replies


Similar Messages:

State Management :: ViewState - Does The Master Page Have Its Viewstate

Apr 30, 2010

I have been getting this error a lot lately with some of my users, and I had a couple of concerns with view state and I have read so many articles but I am still lost..

1. I use masterpage on all the pages and I need viewstate for some of the pages but..

There is a page where a user will fill out the information and then submit this data to a cgi server, and it is where I get most of the Client Disconnected errors, what would happen if I disable viewstate when they click on that button?

Now when a user browses from one page to another, does the view state from the previous page get deleted? If not how would I delete it?

Does the master page have its own viewstate? Would I be able to make sure none of items on my master page are using the viewstate?

View 7 Replies

Web Forms :: Get Value From Textbox When Viewstate Is Disabled?

Apr 29, 2010

I have a repeater which viewstate is disabled, inside i have a textbox and a submit button. Before disabling viewstate i could get the text from the textbox in the submit buttons onClick event. But now it doesnt seem to work.

I dont want to enable viewstate on the repeater as my site get really heavy then. How can I get the value form the textbox when I click the submit button? using .net 3.5

View 1 Replies

ViewStateMode Disabled But Still Getting ViewState Element?

May 14, 2010

I have a ASP.NET 4.0 webforms site where I have the MasterPage so it is set to ViewStateMode="Disabled" along with the content placeholders being set similarly.

When I'd view my page I'd still see a ViewState field rendered, I then tried adding the ViewStateMode="Disabled" to the page level also but that didn't change anything.

View 1 Replies

AJAX :: NoBot Fails When ViewState Is Disabled?

Feb 24, 2010

I tried this in many scenarios and everytime the ViewState is disabled page-wide, NoBot raises an internal NullReferenceException and always returns InvalidBadSession. I suspect that you are referencing the ViewState and it returns a null value which is then used. It's probably a good idea to think about a way that avoids using ViewState.

View 1 Replies

C# - Can't Access Control In Form When Viewstate Disabled

Mar 19, 2011

I want to disable my viewstate in a form because its too bulky (about 1mb per page) due to retrieving some data from database and in other place on the same form I want to access a control from my master page. but when I set viewstate of Listview to false I'll get following error: Object reference not set to an instance of an object. what should I do in this situation? veiwstate is too damn bulky
and here is what I've written for accessing particular control:

Control cc = Page.Master.FindControl("mainContent").FindControl("ListView1").FindControl("itemPlaceholderContainer");
foreach (Control ListItemctrl in cc.Controls)
{
Control lblNewsId = ListItemctrl.FindControl("lblNewsID");
if (lblNewsId != null)
{
Type t = lblNewsId.GetType();
if (t.FullName == "System.Web.UI.WebControls.Label")
{
string newsID = ((Label)lblNewsId).Text;
foreach (Control childCtrl in ListItemctrl.Controls)
{
CheckBox ctrlCB = childCtrl.FindControl("chkItem") as CheckBox;
if (ctrlCB.Checked)
{
//based on DDLAction we will do the things ;)
}
if (childCtrl.FindControl("chkItem") != null)
break;
}//end foreach childCtrl
}
}//end outer if
}//end foreach listItenctrl

View 1 Replies

Web Forms :: Radiobutton List When Viewstate Disabled?

Oct 18, 2010

I am having an issue with dropdown list when viewstate is disabled. The selectedindexchanged event fires even for the other events on the page.

I am pasting the code bello. To reproduce the issues I am mentioning change the selected value of the dropdownlist and then click any button the selected indexchanged event fires even thought we didnot change the value.

[Code]....

View 1 Replies

C# - CheckboxList Not Setting Selected With Viewstate Disabled?

Apr 27, 2010

I have a CheckboxList that seems to load and do everything right, except for when I do a postback, it will not have the Item.Selected property set. I have viewstate disabled for the entire page.

I load it like so(inside Page_Load on every load):
foreach (DataRow service in d.Tables[0].Rows)
{ [code]...

and MyLabel never has any text added to it. I can verify with the debugger that it does reach the _Click's foreach loop, but no item is ever selected. What could be the cause of this?

View 1 Replies

Textbox Control Don't Lose Value On Postback If Viewstate Is Disabled

Oct 23, 2010

When we disabled the viewstate in gridview its lose value but this case not true with Textbox control why?

View 1 Replies

Web Forms :: Textbox Contents Persist Even With Viewstate Disabled?

Jul 16, 2010

After witnessing some strange behvior I'm confused about ViewState again :/

My understanding was a textbox needed to have "EnableViewState" set to true otherwise when the you postback the fields contents would disappear.

That's not happening, I created a textbox and button and a label.

The button was set to copy contents of text box into the label when I pressed it.

I did and the text was populated into the label and remained in the textbox?

This was inside an UpdatePanel and the page itself has a MasterPage, so that might have something to do with it, but I have about 50 textboxes on this page all with viewstate=true on, so I would really like to know what controls need to have enableViewstate=true in order o function properly.

View 1 Replies

Forms Data Controls :: ListView Paging With Disabled ViewState?

Jan 31, 2011

If I disable the ViewState on a ListView, the events raised by it are no longer ired. OnPagePropertiesChanging is the ListView event I've always used in combination with the DataPager to update the ListView to the correct page once a DataPager item is clicked, but since its not being fired, I'm wondering if there are any other options. My ListView is currently in an UpdatePanel, and I'm caching the results that the ListView is being bound to. I could rebind the cached results on the PageLoad, but I can't think of a good way to determine if the PageLoad is being accessed because the DataPager was clicked, or for some other reason, so this doesn't seem like a good idea

View 2 Replies

Forms Data Controls :: GridView Using And ObjectDataSource With Paging And Sort While ViewState Is Disabled?

Nov 12, 2010

I am using a GridView with an ObjectDataSource bound to a DataTable. I am using the GridView for displaying a report, NO editing is being done, just read only, however, I am sorting and paging. I need to turn off ViewState for the GridView to improve performance. After turning off the ViewState I start getting the error messages for both paging and sorting:The GridView 'gridView' fired event Sorting which wasn't handled.This is fine I just need to know how to implement the Sorting and Paging events correctly to leveage the ObjectDataSource. I would preffer not to remove the ObjectDataSource from use, especially if there is a way I can manually wire up the datasource correctly to continue to use the GridView as I had been when ViewState was on.Any help on getting the datasource wired up or a solution for handling the events in the context of the datasource would be great.

View 1 Replies

State Management :: Failed To Load Viewstate. The Control Tree Into Which Viewstate Is Being Loaded Must Match ?

Oct 9, 2010

Now here is the weird thing. First i am running it locally on the built in vs2008 web server.I load my control in fine, do a postback from a linkbutton, locally on my machine it all works fine, no issue.However when it goes onto my host, it falls over with the message:

Failed to load viewstate. The control tree into which viewstate is being loaded must match the control tree that was used to save viewstate during the previous request.Now i also load controls dynamically and use postbacks and things in the admin area of the site...and that works fine, however my front end just keeps failing? See the code behing below:

[Code]....

View 1 Replies

State Management :: ViewState And ObjectDataSource / Getting Values From Viewstate In GetTopThemes?

Jan 11, 2011

I have problem getting values from viewstate in GetTopThemes.

<asp:ObjectDataSource
ID="sourceGetTopThemes"
runat="server"
TypeName="DBConnection"
SelectMethod="GetTopThemes"
EnableViewState="true"></asp:ObjectDataSource>

[Code]....

}

[Code]....

when the page is not Posted back, I saved all values in the viewstate.

View 2 Replies

Hidden Field Vs Viewstate?

Jan 23, 2011

What is the difference when using ::

Hidden field vs View state??

when to use each one ??

which one more secure?? and which is better than in performance?

what are the alternatives?

View 3 Replies

Store Viewstate Other Than In Hidden Field

Jan 30, 2010

can we store viewstate other than in hidden field in asp.net

View 2 Replies

C# - Cant Hide The VIEWSTATE Hidden Field?

Jan 20, 2010

I have to hide the VIEWSTATE and EVENTVALIDATION hidden fields on my ASP.net page at RUN time.I managed to remove the EVENTVALIDATION like so.............

<%@ Page enableEventValidation="false" EnableViewState="false" %>

But the VIEWSTATE is still there and I cant get rid of it and I need to. (hard to explain why)Is there another way of getting rid of it?

View 5 Replies

Viewstate Field Completely Missing In Safari?

Dec 9, 2010

This is happening in multiple versions of Safari, including 5.xIt will post _EVENTTARGET=&_EVENTARGUMENT= but nothing for __VIEWSTATE=This is only happening in Safari, and only on one page of our site.I can't reproduce it - we've spent days trying to. The viewstate isnt overly huge on this page.

View 2 Replies

Web Forms :: Difference Between ViewState And Hidden Field

May 7, 2015

What is difference between ViewState and Hidden Field in ASP.Net. If possible with an example.

View 1 Replies

Forms Data Controls :: ViewState While Using Hyperlink Field?

Mar 30, 2011

I have a GridView that shows results according to user selections above it via checkboxes, dropdown lists etc. Once user clicks on a hyperlink value on one of the rows in GridView, user is taken to another page which is sort of a drill down for that line item in the GridView.

Everything works fine so far, except when the user hits the back button, user selections that filter data on the Gridview page are lost. So, I added ViewState="True" on these filter options (i.e. checkbox, dropdownlist etc.). When back button is hit selections were still cleared. How could I remedy this?

View 2 Replies

State Management :: Save The Viewstate At The Server Side Instead Of __VIEWSTATE Hidden Field?

Feb 10, 2011

i am facing the following problem while saving the viewstate on the server side using the savepagestatetopersistencemedium, but this is not working for the pages which contains update panel.

View 2 Replies

Disabling Viewstate Of Whole Page

Dec 31, 2010

Is it possible to make the viewstate false of whole page including all controls at a time.I mean I don't want to set enableviewstate="false" for all controls..In the page directive of the aspx page I have made enableviewstate="false" but still viewstate of all the controls of the is enabled.. And what the EnableViewState="False"actually works within Page directive.

View 3 Replies

Can't Access Page Viewstate In Usercontrol?

Jun 11, 2010

I stored a object in viewstate on Page. Now when i access the same viewsate object on usercontrol,it shows as null. I even tried creating the same viewstate with same name in usercontrol and page.Both holds different value. I understand that viewstate is a protected property. How does this thing implement in above scenerio or is there any other reason for this behaviour.

Edit:

Usercontrol is there in the page markup. I am not loading it dynamically. I have a page EditFacilityworkType.aspx. On page I have a usercontrol FacilityWorkTypeDetails.aspx(FacilityWorkTypeDetails1). Inside this usercontrol i have a user control Workflow.aspx(Workflow1)

Page_Load() of Page I am retrieving workflowdetails on page_load() of page.

FacilityWorktype facilityWorkType = facilityDetails.GetFacilityWorktypeDetail(SessionHelper.FacilityWorkTypeID);
ViewState["WorkFlow"] = facilityWorkType.FacilityWorkTypeWorkFlow
Inside usercontrol FacilityWorkTypeDetails.aspx. I have a property
public FacilityWorktype FacilityWorkTypeDetails
{
get
{
#region Fill FacilityWorktype
return GetEntityFromControl();
#endregion
}
set
{
PopulateControls(value);
}
}

Now i set this property in page load of page

FacilityWorkTypeDetails1.FacilityWorkTypeDetails = facilityWorkType;
Inside Workflow.aspx, I have a property
/// <summary>
/// Property to fill entity object from controls on this page
/// </summary>
public WorkFlow WorkFlowDetails
{
get
{
return GetEntityFromControls();
}
set
{
BindTranscriptionMethodDDL(ddlTranscMethod);
PopulateControls(value);
}
}
Now PopulateControls() of FacilityWorkTypeDetails1, i am setting property of workflow1
private void PopulateControls(FacilityWorktype value)
{
Workflow1.WorkFlowDetails = value.FacilityWorkTypeWorkFlow;
}

Now when i am retrieving values from

private WorkFlow GetEntityFromControls()
{
WorkFlow workFlow = (ViewState["WorkFlow"] as WorkFlow) ?? new WorkFlow();
//workFlow is null
}

So now inside this function workFlow is null. I want to ask,why is it null when i have set viewstate in page.

View 4 Replies

Moving ViewState To Bottom Of Page

Mar 4, 2010

What are the latest and greatest ways to move ViewState to bottom of the page Can this be done in a IHttpHandler that can be specified in the web.config to intercept requests to "*.aspx"?

<httpHandlers>
<add verb="*" path="*.aspx" type="MyApp.OptimizedPageHandler" />
<httpHandlers>

Other options is that this could be done in a IHttpModule, but that is not as performant, as it will intercept all requests. Also it could be done in an a class deriving from the Page or MasterPage-class, but this is not as modular.Are there any performance penalties to this?

View 3 Replies

Accress Parent Page's Viewstate?

Apr 6, 2010

I have a page in ASP.NET.I have a nested class inside the page.I have a property in this nested class.How can I access the page's viewstate from the property's Set statement?

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved