In my namespace I can have public classes which are accessible to all other pages in my namespace. How do I go about having public functions? Do I have to create a class with the functions in it? Or is there an easier way?
View 3 RepliesI've created a new class in App_Code
namespace Site {
public class MyClass {
public MyClass() {
}
}
}
this is my Global.asax.cs
[code]....
The error is in: MyClass myClass = new MyClass();
The type or namespace name 'MyClass' could not be found (are you missing a using directive or an assembly reference?)
I am using forms authentication in a MVC 2 project.
I have this in my web.config:
<authorization>
<deny users="?" />
</authorization>
I want the /Content folder to be available to users that haven't been authenticated yet. The login view uses the css in that folder, which should be available at login time.
"'ErrorMessageResourceType' property specified was not found."
{"The resource type 'XXXX.XXXXXX' does not have a publicly visible static property named '_RequiredXXXX'."}
I'm getting this error when my Create.aspx view is called and steps over that line:
<%=Html.TextBoxFor(Function(model) model.NO_DEMND, New With {.class = "txtbox", .disabled = True})%>
<%=Html.ValidationMessageFor(Function(model) model.NO_DEMND)%>
The message is there in the Ressources file, I think the problem is deeper than that but i'm having a hard time finding it. It pops this error very early on the ASPX page. It's the first model component it goes thru, i tried removing this one and it's the same message for all the model.xxxx components. I guess it's an error somewhere in the linkage. The .EDMX is correct and I get no build errors,
i get the following error when trying to compile my asp.net site after updating the project from vs2008 to vs2010The type or namespace name 'Syndication' does not exist in the namespace 'System.ServiceModel' (are you missing an assembly reference?)I have the asp.net site targeting 3.5 framework (as it did in vs2008)I also added a reference to System.ServiceModel.Web
View 3 RepliesI'm using MonoDevelop on Mac OS X Snow Leopard to develop an ASP.NET MVC Application. I have tested it on Visual Studio 2008 on Windows 7 and it worked fine, but when compiling it on MonoDevelop it throws the error: The type or namespace name 'Objects' does not exist in the namespace 'System.Data' under this line: public partial class MoviesDBEntities : global::System.Data.Objects.ObjectContext
View 1 RepliesI use vs2008 and my MVC 1.0 and 2.0 Projects were working perfectly but all of a sudden i have an error on trying to compile all of them;
The error is of the form;
Error 1 The type or namespace name 'Controllers' does not exist in the namespace 'XXX' (are you missing an assembly reference?)
Error 3 The type or namespace name 'Models' does not exist in the namespace 'XXX' (are you missing an assembly reference?)
Error 4 The type or namespace name 'AccountController' could not be found (are you missing a using directive or an assembly reference?)
Error 5 The type or namespace name 'IFormsAuthenticationService' could not be found (are you missing a using directive or an assembly reference?)
Error 6 The type or namespace name 'IMembershipService' could not be found (are you missing a using directive or an assembly reference?)
These errors seem to come from the HomeControllerTest and the AccountControllerTest.
note that i recently installed Azure Tools using the Web Installer..Dunno if that could be the cause or problem.
when I put a break point i get this error message:
Error 1 The type or namespace name 'X509Certificate' could not be found (are you missing a using directive or an assembly reference?) D:UsersatttDesktop
fre
etetrtDefault.aspx.cs 7 53 D:...attt
I have a ASMX web service. When I access it from a client the ASMX get compiled but I get this error:
Looking at csc.exe command line from the error detail the System.Windows.Forms asseembly is not referenced.
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0234: The type or namespace name 'Windows' does not exist in the namespace 'System' (are you missing an assembly reference?)
Source Error:
Line 3: using System.ComponentModel;
Line 4: using System.Drawing;
Line 5: using System.Windows.Forms;
Line 6: using System.Xml;
Line 7: using Idp.Core.Configuration;
I uploaded my website to the server, and I have there a working with wcf - it should be fw 3.5I saw that fw 3.5 is installed on the server and also we have re fw 3.0 sp1.I run my website : www.qenglishcenter.comand I'm getting an error : The type or namespace name 'Linq' does not exist in the namespace 'System' (are you missing an assembly reference?)shouldn't System.linq be already existed ?
View 2 RepliesI was earlier having a problem with referencing a 3rd Party Dll (Here) but have overcome this problem and am now having a problem referencing my own classes!
Everything seems fine at build with no errors at all but when I go to run the application it comes up with the following Compilation
Error:Compiler Error Message: CS0234: The type or namespace name 'Secure' does not exist in the namespace 'source_extranet' (are you missing an assembly reference?)
The line that the Error points to this line in the class:
source_extranet.Secure.BackendCustomData newdata =
new source_extranet.Secure.BackendCustomData();
This line of code points to a class in the same folder as the calling code class.
I just added web reference to my web application.When running the application its giving the compilation error.Following is the exact problemThe web service which i am referring is also developed by me.The web service is working fine.
View 3 RepliesWhen I am running my application, I am getting this erro like this:The type or namespace name 'Script' does not exist in the namespace 'System.Web' (are you issing an assembly reference
[WebService(Namespace = "http://tempuri.org/")]
[WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)]
[System.Web.Script.Services.ScriptService]
public class SlideService : System.Web.Services.WebService
i write a simple webservice code in asp.net when i build the service and run the service it is working fine. when i try to access the webservice it is giving some problem , problem means i am not getting that method (webservice method). After completing writing the webserivce i take a asp.net page (.aspx) and in solution explorer i add a webservices and it is added successfully. but when i adding namespace it is not getting the service name ( i not able to add the namespace of websercice
View 1 RepliesI am getting this compilation error"
All my pages are receiving this error - website is down; here's the code:
[Code]....
Except my web config file shows linq is accounted for? [Code]....
I would note that I updated to VWD Express 2010 then had to revert back to 3.5 because my host at Arvixe had not updated my server yet. He then said he updated it and I reverted up to 4.0 again. It turned out he hadn't and I tried to revert back...and then this showed up and numerous other errors.
When I run my ASP.net app I get this error: Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: CS0234: The type or namespace name 'Exchange' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)
Source Error:
Line 06: using System.Web.UI.WebControls;
Line 07: using System.Data.OleDb;
Line 08: using Microsoft.Exchange.WebServices.Data; // error
Line 09: using System.Net;
Line 10: using System.Data.SqlClient;
I have been doing dynamic PDF creation via ASP.net for some time -- in the form of HTML to PDF conversion. It works well for us, but we have accessibility requirements from the State to make everything is accessible. For static PDFs, we simply "tag" the files manually using Adobe's accessibility tools. Of course this does not work for dynamically created files. PDFs that I create dynamically fail the Acrobat Pro Accessibility test.
want to create PDFs dynamically in ASP.net, but producing PDFs that are tagged and can pass the Adobe Accessiblity test? I have researched many components, but none that I have found support tagging.
I am getting following error each time I tried to select database. The database 'DB Name' is not accessible. (Microsoft.SqlServer.Express.ObjectExplorer)
Note: My OS is Win Vista.
When I tried to open SQL Mgmt Studio as Run as administrator than I can able to access database properly.
why it is giving error.
I am also getting following error when my asp.net application is trying to access database.
Cannot open database "DBName" requested by the login. The login failed. Login failed for user 'PCNameabcd'.
I am not very good with SQL Server, how to create user and grant them permission in case that is what causing the problem.
I have application..its runnning on my localhost.. i need one more machine to access that application.. but when in tht link i type my IP address instead of localhost.. it showing cannot find server.. in orderr to access appplication to other machine.. as such there is no UAT server as of now...
View 2 RepliesA network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I have developed a WCF .NET web service. It has evolved from a console application, hence some shortcuts were taken in VS 2008 rather than establishing the project from scratch as a WCF Web Service.
View 4 RepliesI have a page that i created a few weeks back.. had a few controls on the page.. everything worked and works great. Now this past week we had to me some changes to the page, adding a few more controls to the page.. the issue is that now, all the new controls.. (standard .net controls within VS2008) are not accessible from the code behind..
Example, if i add a textbox today to the page.. when i go to the code behind and begin to type textbox1. intellesense doesnt do anything.. and if i complete the line i get a wavy line under it..
In order to gain access to the textbox i have to add this to the code behind
protected Textbox textbox1;
I have an ajax tab container in an aspx page. Earlier I had 2 tab panels in the tab cotnainer. Now I want to add third tab panel. I could add the third panel but I am able to access the third panel, i.e. When I click on third panel, the panel is not shown(I didnt even get the handy cursor when i place the cursor on the third tab panel name).
View 1 RepliesI read a white paper on Building ASP.NET 2.0 Web Sites Using Web Standards from the following site.
[URL]
It also mentions "The source code for this sample Web site is included with this whitepaper". However, this is no where to be found.
lets say I have the following code:
[Code]....
So - to start with textbox1.text is set to 1. But - If I do a postback, the value of textbox is lost - it's just empty. I need to pick up the value of the textbox during "DoThis()" but it only works the first time round.
Surely the value of the textbox is accessible during Page_Iniit?
I'm doing somehting stupid here.
(And BTW - I have to call DoThis from page_Init as that method also adds other controls to the page but I need to get this code working first)/