ADO.NET :: Filtering And Copying Records From One Table To Another
Aug 6, 2010
I have two data tables and I need to compare the dataRows and insert all the unequals into a table. See the codes below. Goal: if the checkbox is true I loop through the ItemData table and store that data into x.Data. Next I look for all records that has row("ItemRandomize") = True and finally I add those records to xData table. There is an if statement in my for loop that checks for duplicate records -- This is were the application fails. How to compare both tables and store the unmatched rows.
[Code]....
View 1 Replies
Similar Messages:
Mar 14, 2010
I have a standard gridview, with the standard paging and sorting interface enabled.The application holds appointments for three organisational units, with a maximum of 3000 appointment records being returned across all three units. The appointment records are quite small.
The choice I am faced with is to:
1. Have an Org Unit dropdown which returns to the datasource on change of selection and at inital databind, and returns appointment records for one org unit at a time i.e. approx 1000 records.
2. Have the objectdatasource return all 3000 appointment records for all org units at initial databind, and filter the objectdatasource by org unit on change of selection, thereby saving a trip to the datasource.
I guess the question boils down to identifying the point at which querying the datasource by org unit is more efficient than filtering the records returned by org unit.
Is 3000 records a lot for a gridview to be paging and sorting etc.
View 3 Replies
Nov 1, 2010
i am using this query but it is giving syntax error,
insert
into Logistics.DisInventory
values
select *
from Logistics_v1.DisInventory)
View 4 Replies
Feb 14, 2011
i've header and detail rad grids. when i click a record from header rad grid, it must be filled detail grid.
how to do this?
View 2 Replies
Feb 15, 2011
When i click on a row in gridview1, i want to go to gridview2 with the id i get from first grid.
How to get id from gridview1 to gridview2 and gridview2 autobinding?
View 1 Replies
Feb 9, 2011
How to copy the data from one table to another table without using the stored procedure
View 3 Replies
Feb 4, 2011
Is there an easy way to copy a table with indexes from one database to another (without data) through .NET code?
View 2 Replies
Apr 27, 2016
I have a stored Procedure, which copies the data in one table to another table in other DB.
I have the query to copy the records to other table.
But, tomorrow, new columns are added to the source table, then, how to dynamically copy the data from those columns to the destination column..
View 1 Replies
Feb 15, 2011
When i click on a row in gridview1, i want to go to gridview2 with the id i get from first grid.
How to get id from gridview1 to gridview2 and gridview2 autobinding?
View 4 Replies
Mar 29, 2011
Table1
t1c1 t1c2 t1c3
1 1 jim
2 2 ruth
3 4 paul
4 8 sam
5 16 NA
Table2 ( Need this)
t2c1 t2c2 t2c3 t2c4 t2c5
10 1 1 jim 2010-02-03
10 2 1 ruth 2010-02-03
10 4 1 paul 2010-02-03
10 8 1 sam 2010-02-03
The tricky part I have to perform is to copy rows( only t1c2 -> t2c2, t1c3->t2c4 columns) untill I see NA(Not applicable string) in t1c3 to Table2 putting (10 in t2c1, 1 in t2c3, current date in t2c5 columns for all rows).
View 1 Replies
Aug 22, 2012
im trying to copying specific record from one datatable to another datatable i used below code
public System.Data.DataTable selectspecificdatarow(System.Data.DataTable dtg, int count, int startindex)
{
System.Data.DataTable dtn = dtg.Clone();
for (int i =startindex; i < count; i++)
[Code]....
its taking too long time in cloneing is there any better way to do this task which is Time effecent
View 1 Replies
May 31, 2010
I have a datagrid control which is bound to a table which containing more than 1000 records. And i want to show only 25 records once a time. I have used paging in datagrid. But each time the next page index is set, query is fired again. This takes lots of time. So what is the easiest way to bound data in this case to improve performance.
View 3 Replies
Feb 9, 2011
I M New to Linq, I M Searching articles using
DBSearchDataContext db = new DBSearchDataContext();
object q = from b in db.Articles
where b.Tags.Contains(val) |
b.NewsTitle.Contains(val) |
b.EnglishContent.Contains(val)
select b;
I cannot exclude results where category = video or photos. H to exclude category where value is "videos" or "Photographs"
View 4 Replies
Sep 16, 2010
I have 2 tables t1 and t2. In t1 I have 4 columns from that I want to insert only 2 columns to another table t2. I only want to send data which is in the form of IP address like (123.123.123.123). After eliminating nulls and other data.
View 7 Replies
Apr 10, 2010
I want to make a filtering table. It will be a table where below each column it will have a textbox. I want to, while the person type a word in the filter textbox, the table refresh, displaying only the items (rows) with that word. I think AJAX is a good idea. Just put the table and the textbox in a UpdatePanel, and then write a code to refresh the table on textbox_changetext event. The problem is that you have to take the cursor out of textbox to have the event fired, and I want the table update while text typing.
View 4 Replies
Sep 30, 2010
I am using this code to fill my datalist:
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim myConnection As SqlConnection Dim myCommand As SqlDataAdapter
myConnection = New SqlConnection("mydb")
myCommand = New SqlDataAdapter("SELECT * FROM Posts", myConnection)
Dim ds As DataSet = New DataSet() myCommand.Fill(ds)
DataList1.DataSource = ds DataList1.DataBind()
End Sub
It works and fills the datalist with the whole table. When this page opens the address bar is like [URL].Ii would like the datalist to show all contents in the table with this specific thread ID.
View 18 Replies
Apr 12, 2012
I tried to filter the data table and order by the records based on ID.
Ny filter string will looks like this.
sFilter= "ORDER BY Column1"
when i tried this, i got the following error."Missing operand after 'ORDER' operator."
View 1 Replies
Mar 9, 2010
I save dates as a string in a varchar data field named "TilDato" in a SQLServer-express table. I want to filter the records smaller than a specific date from a variable in the script. I try the following statement, but it does not seems function logically.
objCmd = new
SqlCommand("SELECT * FROM Reservering WHERE @laanedato<=TilDato",myConn2);
objCmd.Parameters.Add("@laanedato", laanedato);
objRdr = objCmd.ExecuteReader();
View 2 Replies
Nov 18, 2010
I have an Access 2010 DB that I have a table of RAW data in. In my scenero when table 'a' has been populated all the rows with the updatedate of Now() get moved to another table... the SQL is like this...
[Code]....
As you can see it is a very simple query but it does NOT return any rows. There are actually 404 rows with todays date in teh Append_Date column.
I am stumped as to why it does not return rows?
View 1 Replies
Oct 29, 2010
I have two tables for storing language translations - tblEN and tblES. They have the same structure which is nvcEnglish and nvcLocal - both nVarChar fields.
In nvcLocal of the Spanish table, I enter the Spanish translations of words and phrases used within my app. Problem is, when I add a bunch of new records to the English table I also have to go in and repeat the data entry into the Spanish table. I am wondering if there is a way to import the newly added records into the Spanish table using Transact SQL?The plain language query would be something like:
If the data in tblEN.nvcEnglish does not exist in tblES.nvcEnglish then insert a new row into tblES with the values from tblEN
View 5 Replies
Aug 7, 2010
I have two tables and I want to display the second one based on the primary key:
the first table is tbl1 (id,fName,lName), and the second one is scnds(id,course,tbl1id).
I am practice using MVC 2.0, so I bulilt the the class repository
[Code]....
Then created the Studentcontroller
[Code]....
The problem is if I used Details method it will show only the first record, but I want to display every course that specific a student has. I don't know if the problem in repository or in the controller.
View 2 Replies
Dec 2, 2010
i m developing website in asp.net n page name is 1.aspx i want to show records in table form but my requirement is that it should be hyperlink username when ever visitor clicks on that.next page will come n the username passed to another page <td><%#Container.DataItem("user_name")%> </td>
View 4 Replies
Jan 11, 2011
I'm trying to DataBind a DataSet to a GridView in VB but I need to remove certain records from the DataSet that have the ID present in another table.
Here's my DataBind:
[Code]....
View 3 Replies
Jan 7, 2011
I am fairly new to Vb.net. I have succesfully populated Dataset from a Text file using Schema.ini.
However I acually want to append these records into a Table and cannot figure it out.
View 3 Replies
Nov 9, 2011
I am doing a project where I need to be able to pick a records from a dropdown list and then have the rest of the records in the database display below in a table.
I attached an image of what i have so far which is the dropdown box and the table of data, but whenever i pick another item from the dropdown box it doesnt update the data listed below.
View 8 Replies
