I tried to add a custom property to the data model:
public partial class Department
{
public string ExtensionIdName
{
get
{
return Extension.ExtensionName;
}
set
{
}
}
}
It seems that it works, but when I bind the data to a ListView it shows all the properties except the property I added manualy (ExtensionIdName).
I created a control where other developers can create an instance and use. There is a button click in the control. How do I allow developers to plug in their own code in a certain part of my control? I am not sure if or how exactly to use a delegate or event in this scenario.
[code].....
How to I update MyControl to allow this?
I am using the Entity Framework for the first time and want to know if the following is possible - I have generated my classes from the DB, and have one called Category.
Obviously it has all my fields in the table (ID, CategoryName, SortOrder etc..) but I want to know if I can add a custom property which is not in the table, but is actually the result of a custom method.
I want to add a new property called 'CategoryURL' which is basically the 'CategoryName' property run through a custom method and returns a hyphenated string.
My initial thought is inheriting from the generated Category class and creating something like this inside?
public string CategoryURL
{
get{ return MyCustomMethod(this.CategoryName) }
}
Is this the correct approach? And will 'this.CategoryName' work as I think it should? Basically the end result is when I return a list of 'Category' I want this to be part of the class so I can use it in my foreach loop.
I have a custom class downloaded from internet. In this class, there is a properties where by the value can be either 0, 1 or 2 only and I MUST assign it during run-time. But some how, this assignment only work using VB, and not C#.
[Code]....
In C#, it the compiler said "missing cast or conversion...". But in VB, it works perfectly.
I am new to LINQ but not >net. I do understand SQLDataSource, etc. I was just told by a coworker not to use a LINQ to SQL Class for my new project (Bank.dbml). I was told to use instead the ADO.Net Entity Data Model (bank.edmx).
BankModel.edmxBank.dbml
When only using ADO.Net Entity Data Model I try to associate a GridView with a new LinqDataSource I get no options. When I add a LINQ to SQL Class I get the option to use it but it is empty. Is this because all my LINQ classes are mapped in the ADO.Net Entity Data Model (bank.edmx)? Can someone tell me (or point me to) what the differences are in these two?
I have an ASCX that inherits from a WebControl that has a 'CustomConfiguration' property of type CollectionConfigurationItem. This configuration gets set elsewhere in the code, so by the time it gets to the ASCX it is set up to how I wish to use the data. At this point I'd like to render out another control using this configuration, like so:
<modules:DataModule runat="server" CustomConfiguration="<%# Model.CategoryListConfiguration %>" />
However, breaking into DataModule always results in 'CustomConfiguration' being null, which is the default value for the property. I've tried adding a Bindable attribute to the property but to no avail, and when I set an EventHandler for the DataBinding event on the DataModule it doesn't even get called.
How can I set this custom-class-typed property from the markup or, failing that what's the second-best method of getting this to work?
The built in Asp.Net Controls (label, Textbox, etc.) all have a CssClass property that can be set, what do I need to do to implement that for a Web User Control?
I know how to add a property and pass thru the get & set to the corresponding Asp.Net control (example if I have a label I know how to create a LabelCssClass property that provides a get & set, but the control itself how do I set a CssClass or ClassName property.
I am having problems adding a reference to a custom assembly in my Bin folder within a controller class I am writing. I can see the dlls in the Bin folder of my Solution file and when adding a new 'using' block to the top of code page, its not picking up any of my assemblies as I try to spell them out.I tried just typing them in and building the solution, but I get errors, it just wont pick these up!
View 3 RepliesIs it possible to use InvokeMember() of Type class to call a property of a property of a class?
[Code]....
So what I'm trying to accomplish is this
[Code]....
The user control has public properties named accordingly and the page has protected properties accordingly which I've verified have the desired values.
For some reason the values are always empty strings or 0s in the usercontrol, no matter what the page property is.
i am choosing a category from a DropDownList controll, and if want to add a new category at the same time i have a TextBoks for it, i have create a Model, BLL and DAL classes, my problem is:
in the DAL class i want to add a new row to Question, but i need to check first if the object.category exsist in the table Category, if it does i want to get the Cid for it if it dosen't exist i want to create a new raw then get the Cid, this is my code:
public string add(Faq inFaq)
{
using (var db = new DBClassDataContext())
{
try
{
var se = from Category in db.Categorys
where Category.category == inFaq.category
select Category.Cid;
if (se.Count() == 0 ).........
I'm trying to get a custommembership to work and i have the following problem.
i get a error class 'system.data.datatable' cannot be indexed because it has no default propert.
Here's my function.
Public Overrides Function GetUserNameByEmail(ByVal userEmail As String) _
As String
Dim userName As String = ""
Try
Dim mymember As New Data.DataTable
[code].....
First time using a dataset instead of a data reader, and I'm trying to fill both a datalist on my page, and set the selected item value for a drop down list. The datalist on the page is displaying properly, but I get this errorClass 'System.Data.SqlClient.SqlDataAdapter' cannot be indexed because it has no default property. when trying to set the selected value for the drop down list. Why can't I get the selected value for the drop down list to work properly?
[Code]....
I need to read the property and the datatype from the classs file that i has been uploaded.
View 1 RepliesHow insert a drop list property into a custom webcontrol? This a drop list property is show all textbox control on usercontrol or webpage.
View 3 RepliesIam developing a custom checkbox control deriving from the 'compositecontrol' which i need to use it for a composite control purpose.
public
class
TngCheckBox :
CompositeControl
{
i have written the required properties which are working fine except the "checked" property. here is my code for 'checked' property. i tried both the below ways (commented one and not commneted) . the problem is the 'checked' value is not setting the value at the get set part of the property.its assigning the value at the design time , but when i check and uncheck its not updating the property value.which is resulting me wrong .
[Code]....
Iam developing a custom checkbox control deriving from the 'compositecontrol' which i need to use it for a composite control purpose.
public
class
TngCheckBox :
CompositeControl
{
i have written the required properties which are working fine except the "checked" property. here is my code for 'checked' property. i tried both the below ways (commented one and not commneted) . the problem is the 'checked' value is not setting the value at the get set part of the property.its assigning the value at the design time , but when i check and uncheck its not updating the property value.which is resulting me wrong .
[Code]....
I have a custom control, inherited from Button. This is the class definition for the control and 2 properties:
[Code]....
I show you 2 properties, only to illustrate the problem.
as you see Aplicacion property is of a custom type Sistema, and Roles property is of type List<UserRol>.
The Aplicacion property is rendered well, this way:
[Code]....
The problem I have is with List<UserRol>. I couldn't get it to be rendered. I expeect to be rendered this way:
[Code]....
Finally, this is the TypeConverter and Editor definitions for the list:
[Code]....
The UserRol class is a typical class, without any special attributes.
I have discovered that when I use the custom editor for Roles property, the collection is not persisted. When I use the default editor for the collection, the collection is persisted.
I need to create one custom text box control which should be bind with data base.
I am referring following link...
http://msdn.microsoft.com/en-us/library/system.web.ui.webcontrols.databoundcontrol.aspx
I used DataBoundControl to create my control but i am not able to do it properly.
public class SimpleTextBoxControl : DataBoundControl
{
private TextBox nameTextBox;
public string DataTextField
{
get
{
object o = ViewState["DataTextField"];
return ((o == null) ? string.Empty : (string)o);
}
set
{
ViewState["DataTextField"] = value;
}
}
[
Bindable(true),
Category("Data"),
DefaultValue(""),
Description("The text to display on the link."),
Localizable(true),
PersistenceMode(PersistenceMode.InnerDefaultProperty)
]
public virtual string DataTexValue
{
get
{
string s = (string)ViewState["Text"];
return (s == null) ? String.Empty : s;
}
set
{
ViewState["Text"] = value;
}
}
protected override void PerformDataBinding(IEnumerable retrievedData)
{
if (retrievedData == null)
return;
base.PerformDataBinding(retrievedData);
Controls.Clear();
nameTextBox = new TextBox { ID = "nameTextBox" };
foreach (object dataItem in retrievedData)
{
if (DataTextField.Length > 0)
{
nameTextBox.Text = DataBinder.GetPropertyValue(dataItem, DataTextField, null);
}
DataTexValue = nameTextBox.Text;
}
this.Controls.Add(nameTextBox);
}
}
For some unknown reason I suddenly am unable to create an object variable for a Linq Data Class. If I create a new project and try the process again with the same database everything works as advertized.The code I am using is Dim db As New RoggDataContext which gives me an error on the object variable "db": Overload resolution failed because no accessibility 'NEW' accepts this number of arguments.I have looked inside every file in the Web Project like the web config to check the connection string, gobal, and designer.vb looking for any errors whit no JOY. I also tried to create a new form and code behind with a button and received the same error.This is mind blowing because as I already stated, I can create a new Web Site and the problem goes away.
View 3 RepliesI want to delete entity from linq class this entity has one to many relationshipe with another table so I want to delete all entities related to this one for example I want to delete classroom so i should delete all student is this classroom fisrt i don't how to delete all these student in one time
View 1 RepliesI have developed a web application in Asp.net with C#. My requirement is to add an extra property to textboxes in all forms. The property should be "SID". I don't want add an exterban control i want to add extra property with the available textbox.
View 1 RepliesI'd like to inherit all my controllers from a custom base class that I write myself. I can change the line every time I add a new controller, but it would be nicer if I could somewhere specify the default value that gets set there. That way I wouldn't need to worry about forgetting this, and other people who get added to the project later on would have an easier time.
View 3 RepliesI know that how to create custom control and add custom property.
I want to create property like DataSource to my custom control.
I have Create a Custom Principal and a Custom Identiy for my Web Application and upon forms authentication
1 Create a profile of type object
2 Assign it to the Principal profile
3 assign the principal to the Http.Current.User (this now has the complete profile information )
As i understand upon redirection the principal is recreated and i loose the information i had stored in the profile.
I there a way to persist the profile information ?
I though can achieve persisting some information using FormsAuthenticationTicket in userData but that wouldent solve my purpose ..