AJAX :: Can't Select Different Tabs On Toolkit's TabContainer
Oct 1, 2010
I've been searching the net for the past 3 days looking for solutions for this... but apparently it is only happening to me... As far as I've seen (even in this video: [URL], TabContainer/TabPanel is pretty much drag & drop. But for some so far unknown reason, I can't click on the tabs to change them, and I can't see the selected tab(there is no difference in the rendering of the tabs to show selected tab).
Is there any javascript function that I have to add to my page by default to make it work?
This is the way the tabContainer is being rendered:
As you can see, even though we know tab 1 is selected, the 3 buttons look the same. And when you try to click "Tab Two" or "Tab Three", it is as if the tabs were read-only...
My code is as follows... The optional properties that I setted, such as Enabled="true" on the tabpanels, are the tries I've done these past 3 days to fix the problem... And I made all TagPrefix="asp" just to make matters simple!
[Code]....
View 6 Replies
Similar Messages:
Feb 14, 2011
I have been adding different JQuery Carousels to AJAX Tabbed Panels - the first one displayed on the page always works. But any other tabs dont work when I select the tab. I have about a dozen different carousels.
Can anyone recommend one that works in AJAX Tabs or how I can go about rectifying this?
View 1 Replies
Jan 6, 2011
I have a Collapsiblepanelextender and a TabContainer with two tabs. the code works fine in FF and Chrome but fails in IE8. I am using VS2008 .Net 3.5 and the latest AjaxToolkit.
I am trying to control the collapsible behavior through tab clicking using javascript. here is the code to replicate my problem.
The aspx.cs code:
[Code]....
View 1 Replies
Jun 16, 2010
how to add close to all the tabs in a tabcontainer.The scenario is, I have only TabContainer on aspx and m populating tabs with UserControls programmatically (with use of DOM). How can I develop the close of a tab with small X on each of the tab? I am not sure how many tabs I have.
View 4 Replies
Sep 25, 2010
In a web page i have 5 tabs from 1 st tab to 2 tab i have to go by a linkbutton click not through header navigation so i created a link button and in the button click event
i have written the code like below
protected void lnkproceceed2tab3_Click(object sender, EventArgs e)
{
TabContainer1.ActiveTab = TabContainer1.Tabs[3];
}
its sitting in same tab i cant go to the next tab by a link button.
assume my page workflow is like below
if i click next button in 1 st tab it will load a pop up, then in that pop up i have two buttons one link button is to proceed to 2 nd tab another is go back to 1 st tab. where i got struck is from the pop if i click to proceed to 2nd tab i cant go to the 2nd tab.
View 4 Replies
May 7, 2015
Dynamically add Tab Pages to tab control in Web form using asp.net and c# ...
View 1 Replies
Mar 19, 2013
I have ajax tab container i want to align it vertical, i went online at ajaxtoolkit sample website but its not seems to work
View 1 Replies
Jan 11, 2011
I have a page with a AJAX Tabcontainer. In that page/tab is a link to another page. On the other page (no AJAX Tabcontainer there) a user can fill in some information and a button there triggers a WebMethod. When the WebMethod is successfully executed my javascript method (The one then gets triggered after the WebMethod is finished) redirects (window.location = ..aspx) back to the aspx page that contains the AJAX Tabcontainer.
View 1 Replies
Nov 3, 2012
I am having a requirement where I am using Ajax Tab, I am having 3 tabs. If user select second or 3 rd tab I would like throw an alert saying do you wish to move if yes I would like to move to next tab if not I would like to stay in the current tab...
My sample script is as follows
<script type="text/Javascript>
function checkSave() {
sSave = window.confirm("You have some changes that have not been saved. Click OK to save now or CANCEL to continue without saving.");
if (sSave == true) {
var tabIndex = $find("TabContainer1"); //AdvOrBasicSearch is name of tabContainer
[Code] ....
View 1 Replies
Jan 12, 2011
I used ajax tabcontainer and 7 tabs in it.It works fine on my locahost but when i deployed it on server it doesn't show tabs background..it shows only labels as tab names.
View 1 Replies
Mar 17, 2014
i seen ajax tab container... got answer also but it working fine in normal page if i add that to aspx page which is attached with master page it is not working properly.. means tab are coming horizontaly instead of vertical
View 1 Replies
Sep 20, 2010
Having a strange issue with the TabContainer in the AJAX Toolkit. We have several views into a customer record system that we have built as ASP.net controls. These controls use UpdatePanels to load data asynchronously. We use jQuery and jquery.ui to place these controls in separate tabs on a single page. Which all works swimmingly. Lately, I've gotten a little tired of the jQuery tab hackish approach and decided to port everything to use the TabContainer. I want to be able to control the tabs as objects.
At first glance, everything works perfectly. I just slapped the controls into tabs in a TabContainer and everything looked great. However, for some reason, databound controls are losing their data. For instance, grid views vanish when I switch pages. A drop down control with an OnTextChanged event, loses its databound list of values upon post back. Something about the TabContainer -> Custom Control -> UpdatePanel -> Control that uses data binding heirarchy is throwing it out of whack and the debugger isn't shedding any light. It seems like control state isn't being stored. I don't really know enough about control state to know what to look for. Here is the markup for the TabContainer:
<asp:TabContainer ID="tcBanner" runat="server" ActiveTabIndex="0" Width="100%"
EnableViewState="False" ScrollBars="Vertical">
<asp:TabPanel runat="server" HeaderText="Comments" ID="tbComments">
<ContentTemplate>
<luBannerControl:Comments ID="commentsTabContent" runat="server" />
</ContentTemplate>
</asp:TabPanel>
<asp:TabPanel runat="server" HeaderText="General" ID="tbContact">
<ContentTemplate>
<luBannerControl:Contact ID="contactTabContent" runat="server" />
</ContentTemplate>
</asp:TabPanel>
</asp:TabContainer>
Here is the markup for one of the controls:
<asp:UpdatePanel ID="pnlComments" UpdateMode="Conditional" runat="server">
<ContentTemplate>
<asp:GridView ID="CommentsGridView" AllowPaging="true" PageSize="20" DataSourceID="BannerSqlDataSource" runat="server" AutoGenerateColumns="False" GridLines="None" CssClass="CommentGrid" HeaderStyle-CssClass="CommentGridHeader" RowStyle-CssClass="CommentRowsEven" AlternatingRowStyle-CssClass="CommentRowsOdd">
<Columns>
<asp:BoundField DataField="SPRCMNT_TEXT" HeaderText="Comment" SortExpression="SPRCMNT_TEXT" />
<asp:BoundField DataField="SPRCMNT_DATE" HeaderText="Created" SortExpression="SPRCMNT_DATE" DataFormatString="{0:M/dd/yyyy}" />
<asp:BoundField DataField="SPRCMNT_CMTT_CODE" HeaderText="Type" SortExpression="SPRCMNT_CMTT_CODE" />
<asp:BoundField DataField="SPRCMNT_CTYP_CODE" HeaderText="Source" SortExpression="SPRCMNT_CTYP_CODE" />
<asp:BoundField DataField="sprcmnt_user_id" HeaderText="User" SortExpression="sprcmnt_user_id" />
</Columns>
</asp:GridView>
</ContentTemplate>
<Triggers>
<asp:AsyncPostBackTrigger ControlID="txtSearch" EventName="TextChanged" />
<asp:AsyncPostBackTrigger ControlID="btnClearFilter" EventName="Click" />
</Triggers>
</asp:UpdatePanel>
View 1 Replies
Mar 28, 2011
I used the following code to add TabContainer to page
<asp:TabContainer ID="TabContainer1" runat="server">
<asp:TabPanel runat="server" HeaderText="tab one" ID="TabPanel0">
<ContentTemplate>
<asp:TextBox ID="TextBox1" runat="server"></asp:TextBox>
</ContentTemplate>
</asp:TabPanel>
<asp:TabPanel runat="server" HeaderText="tab two" ID="TabPanel1">
<ContentTemplate>
<asp:Button ID="Button1" runat="server" Text="Button" />
</ContentTemplate>
</asp:TabPanel>
</asp:TabContainer>
[code].....
but when the page is rendered TabPanel is always Hidden,I wateched the html code by Firebug and found visibility is hidden... what is the problem? http://i.imgur.com/m1eSW.jpg
View 2 Replies
Mar 8, 2010
I am using Tabcontainer of AJAX Control Toolkit . The problem is that, i have 10 tabpanels. I want to show this tabs in two lines, first 5 in one line, second 5 tabs in another line.
View 2 Replies
Apr 10, 2010
I am trying to uise the Ajax Toolkit Tab container and Tab Panel controls. I got them working BUT the tabs are on the right side of the web page instead of starting on the left side. I have tried many things to move them to no avail.
I am using a master page and a css style file. By clicking around they moved to where they should be but then after viewing web page went back to right (wrong) side.
<%@ Master Language="VB" CodeFile="MasterPage.master.vb" Inherits="MasterPage" %>
View 1 Replies
Jul 22, 2010
At present we are using <ajax:TabContainer> to load tabs. I have 5 user controls inside <ajax:TabPanel>.
The problem is that all the data on these 5 pages gets loaded at once and increases the loading time as well as it is very hard to debug. Can we do lazy loading uisng TabContainer control? so that only the data of the current tab is loaded and when we click on the other tab then that's control data gets loaded.
View 7 Replies
Dec 31, 2010
am trying put values using javascript function but for some reason that is not working and the values are lost :(what i am trying do?, from the tabchanged event I ask if the user want return to the last loaded tab and go to the functionNavigateToLastLoadedTab
[Code]....
after to run this method i don't know how the browser is cleaning the values from the control :(.
var tabs = $find('<%=Tabs.ClientID%>');
View 4 Replies
Sep 10, 2010
Yesterday (Thursday Sep 10th 2010) I was happy to have a TabContainer working fine on a simple page as im learning to use it.
On the page was:
1) Ajax Script manger.
2) 1 command button (it would make label1.text = "hello world"
3) A Ajax TabContainer with 2 tabs...
4) Label1
That was it and it was working fine in Chrom and IE Woohoo.. I go home...
This morning I load it up to keep working way and doing more with it.... Chrome is my default browser, it loads and I click tab2 then tab 1 all is well.... I click Butto1 and the hole TabContainer disapears..
After much dinging I find it still works in IE but that my Chrome has updated (on its own): (I notice only one ICON in Chrome in the uper right corner by the addres bar... Only the Wrench ICON, No more Page ICON.. So I check and sure enough Chrome did a push to V 6.0.472.55.. Anyhow thats the difference and now TabContainer goes poof/disappears when clicking a button that refeshes the page.
View 21 Replies
Aug 2, 2010
I am working on an ASP.NET application that has a tab container with 5 tab panels in it. There are 2 'admin' user tabs, 2 'regular' user tabs, and a 'receipt' tab. Now, depending on what kind of user is accessing the page, I am enabling or disabling/hiding 2 of the tabs (regular or admin), but I am always showing the receipt tab. So, in essence, there are only ever 3 tabs visible - either 2 'regular' tabs and a receipt tab, or 2 'admin' tabs and a receipt tab.
Now, when a user logs into the app from the login page, and is directed to the page with the tab container and 5 tab panels on it, I would like to have the receipt tab selected by default, and to have it shown to the user. This tab is the fifth in the container (TabIndex = 4), and so in the OnLoad event for the page, I try setting something like this up
tabContainer.ActiveTabIndex = 4
...but it shows nothing. So I am thinking that maybe, since 2 of the tabs are hidden, I need to set the index to 2 (for the 3rd visible tab, which should be the receipt tab). Well, when I do this, the 3rd tab in the tab panel control at the top is indeed selected - but the actual content in the tab is still the content from the first tab (TabIndex = 0)....? Is there some sort of event I need to call to "flush out" what is being displayed in the actual panel, or am I missing something else?
View 3 Replies
May 13, 2012
I have a tab container with 10 tabs each with unique id on a hyperlink click i need to make some tabs visible true false,in hyperlink I am passing a query string param
if the param="Y" param = Request.QueryString["type"];
if (param == "Y") {
for (int tc = 0; tc <= TabContainer1.Tabs.Count - 1; tc++) {
if (TabContainer1.Tabs[tc].ID == "Y") {
TabContainer1.Tabs[tc].Visible = true;
} else {
TabContainer1.Tabs[tc].Visible = false:
} } }
I have the above condition but on this click the tab container is not at all visible but without any parameter passing the tab container is visible.
View 1 Replies
Dec 17, 2010
I use a border for the TabContainer body which works fine.
[Code]....
also I use three hidden divs and one visible div inside a main div which works as body of Tabcontainer
View 1 Replies
Apr 15, 2010
I am using ASP.NET page with updatepanels and Jquery UI tabs. However, I'm having a problem with it. When I click on a button it should set the value of a hidden field which when the page posts back, it will select the new tab. So in document onload set the tab to the initialised value of the hidden field:
$(function()
{
var loadTab = $("#<%= hidTabSelected.ClientID %>").val();
$('#dvJqTabs').tabs(
{ selected: loadTab ,
select: saveTab
}
)
});
Now when I want to change the tab, in the ASP.NET page button click handler I do some processing and finally set hidTabSelected = 1 (previously 0). When the page posts because I am in UpdatePanels I won't get a doc ready event. So instead I intercept the pageLoad() and attempt to set the tab again:
function pageLoad()
{
alert('pageLoad()');
var loadTab = $("#<%= hidTabSelected.ClientID %>").val();
$('#dvJqTabs').tabs( { selected: loadTab } );
}
The tab is not getting selected? If I go into console of firebug and inspect $("#hidTabSelected").val() I get 1. So why isn't the 2nd tab showing?
View 2 Replies
Mar 24, 2011
I've been looking for the best method to add "Tab Views" to my .ASPX web pages. I read about one method on the internet and actually remembered the other possible method from a control in the default VS2010 toolkit.
I like the <asp:MultiView> control because its so easy to use. The only thing is that it requires the page to be posted back. The second method would use CSS + JavaScript to essentially emulate tabbed views in the same webpage by changing the styles of <div> elements based upon the users tab selection, making the selected tab appear visible and the other tabs appear invisible.
I like the ease of implementation of the <asp:MultiView> but I dislike the fact that it requires the page to be posted back and resent. Also, I haven't even tried this myself yet but Im assuming there is a way to setup the page to make it look like you can select different tabs with a MultiView. Can anyone confirm this?
I like the CSS+JavaScript method of "Tab Views" because no page postback is required but it is a little more work to code. No big deal really though once its done.
View 2 Replies
Apr 8, 2010
Does Ajax Tab support using sub tabs (or children tabs)?I have a project where I need to show several tabs like "Sales" "Production" "Revenue" and when I click on for example "Sales" I would like to see a new tab tab with "Currentales", "History", "Comparison" etc etc. and be able to click each one of these for further processing.
View 3 Replies
Nov 4, 2010
What is available in .NET 3.5 that is AJAX but does not require the toolkit?
View 5 Replies
