I have a Collapsiblepanelextender and a TabContainer with two tabs. the code works fine in FF and Chrome but fails in IE8. I am using VS2008 .Net 3.5 and the latest AjaxToolkit.
I am trying to control the collapsible behavior through tab clicking using javascript. here is the code to replicate my problem.
The aspx.cs code:
[Code]....
how to add close to all the tabs in a tabcontainer.The scenario is, I have only TabContainer on aspx and m populating tabs with UserControls programmatically (with use of DOM). How can I develop the close of a tab with small X on each of the tab? I am not sure how many tabs I have.
View 4 RepliesIn a web page i have 5 tabs from 1 st tab to 2 tab i have to go by a linkbutton click not through header navigation so i created a link button and in the button click event
i have written the code like below
protected void lnkproceceed2tab3_Click(object sender, EventArgs e)
{
TabContainer1.ActiveTab = TabContainer1.Tabs[3];
}
its sitting in same tab i cant go to the next tab by a link button.
assume my page workflow is like below
if i click next button in 1 st tab it will load a pop up, then in that pop up i have two buttons one link button is to proceed to 2 nd tab another is go back to 1 st tab. where i got struck is from the pop if i click to proceed to 2nd tab i cant go to the 2nd tab.
I've been searching the net for the past 3 days looking for solutions for this... but apparently it is only happening to me... As far as I've seen (even in this video: [URL], TabContainer/TabPanel is pretty much drag & drop. But for some so far unknown reason, I can't click on the tabs to change them, and I can't see the selected tab(there is no difference in the rendering of the tabs to show selected tab).
Is there any javascript function that I have to add to my page by default to make it work?
This is the way the tabContainer is being rendered:
As you can see, even though we know tab 1 is selected, the 3 buttons look the same. And when you try to click "Tab Two" or "Tab Three", it is as if the tabs were read-only...
My code is as follows... The optional properties that I setted, such as Enabled="true" on the tabpanels, are the tries I've done these past 3 days to fix the problem... And I made all TagPrefix="asp" just to make matters simple!
[Code]....
Dynamically add Tab Pages to tab control in Web form using asp.net and c# ...
View 1 RepliesI have ajax tab container i want to align it vertical, i went online at ajaxtoolkit sample website but its not seems to work
View 1 RepliesI have a page with a AJAX Tabcontainer. In that page/tab is a link to another page. On the other page (no AJAX Tabcontainer there) a user can fill in some information and a button there triggers a WebMethod. When the WebMethod is successfully executed my javascript method (The one then gets triggered after the WebMethod is finished) redirects (window.location = ..aspx) back to the aspx page that contains the AJAX Tabcontainer.
View 1 RepliesI am having a requirement where I am using Ajax Tab, I am having 3 tabs. If user select second or 3 rd tab I would like throw an alert saying do you wish to move if yes I would like to move to next tab if not I would like to stay in the current tab...
My sample script is as follows
<script type="text/Javascript>
function checkSave() {
sSave = window.confirm("You have some changes that have not been saved. Click OK to save now or CANCEL to continue without saving.");
if (sSave == true) {
var tabIndex = $find("TabContainer1"); //AdvOrBasicSearch is name of tabContainer
[Code] ....
I used ajax tabcontainer and 7 tabs in it.It works fine on my locahost but when i deployed it on server it doesn't show tabs background..it shows only labels as tab names.
View 1 Repliesi seen ajax tab container... got answer also but it working fine in normal page if i add that to aspx page which is attached with master page it is not working properly.. means tab are coming horizontaly instead of vertical
View 1 RepliesIn my page I have CollapsiblePanelExtender Menu in left side. In that I have sub Tabs.
*Main Menu
-OPen
-Completed
-Manual...etc
Like that. When i click on any Tab,it displays concern page in Right Side(ie.. in that page only.no new page)
I have a tab container with 10 tabs each with unique id on a hyperlink click i need to make some tabs visible true false,in hyperlink I am passing a query string param
if the param="Y" param = Request.QueryString["type"];
if (param == "Y") {
for (int tc = 0; tc <= TabContainer1.Tabs.Count - 1; tc++) {
if (TabContainer1.Tabs[tc].ID == "Y") {
TabContainer1.Tabs[tc].Visible = true;
} else {
TabContainer1.Tabs[tc].Visible = false:
} } }
I have the above condition but on this click the tab container is not at all visible but without any parameter passing the tab container is visible.
I have been adding different JQuery Carousels to AJAX Tabbed Panels - the first one displayed on the page always works. But any other tabs dont work when I select the tab. I have about a dozen different carousels.
Can anyone recommend one that works in AJAX Tabs or how I can go about rectifying this?
I use a border for the TabContainer body which works fine.
[Code]....
also I use three hidden divs and one visible div inside a main div which works as body of Tabcontainer
Does Ajax Tab support using sub tabs (or children tabs)?I have a project where I need to show several tabs like "Sales" "Production" "Revenue" and when I click on for example "Sales" I would like to see a new tab tab with "Currentales", "History", "Comparison" etc etc. and be able to click each one of these for further processing.
View 3 Repliesin DotNetNuke module,i tried CollapsiblePanelExtender, it work fine with FF,it alway explan with IE?
View 1 Replieswhen i put Collapsible panel extender inside iframe(html control) i get this error: Sys.ArgumentException: Value must not be null for Controls and Behaviors. Parameter name: element iam using VS 2008
View 3 RepliesOn the code below, I am having a problem setting up a CPE. When I run the program it does not look like the tutorial. When it collapsis nothing can be seen and the collapased text is not visable anywhere. On the tutorial there is a bar and arrow. Is that something I have to create seperately? Also, what kind of buttons should I use to toggel the panel. I would appreciate it if someone could post code showing how this works.
[Code]....
I used CollapsiblePanelExtender in a web form and would like to keep its state either collapsed or expanded by user. When user navigates away from the page and then comes back a little bit later, he still see the panel collapsed or extended. codes:formA.aspx:
<asp:Panel ID="panelPetInfoExtender" runat="server" Width="100%">
<span>Pet Information</span>
<asp:Image id="img1" runat="server" ImageUrl="collapse_blue.jpg" />
</asp:Panel>
<asp:Panel ID="panelPetInfo" runat="server">MY PET</asp:Panel>
<asp:CollapsiblePanelExtender ID="CollapsiblePanelExtender1" runat="server" TargetControlID="panelPetInfo" EnableViewState="true" ExpandControlID="panelPetInfoExtender" CollapseControlID="panelPetInfoExtender" Collapsed="true"
ImageControlID="img1" ExpandedImage="collapse_blue.jpg" CollapsedImage="expand_blue.jpg" />
I use two different collapsiblepanelExtenders with similar colapsedControlID which is not a matter here. ince both of them working but with some misbehaviour, for example if the first one is open and I click wherever on it , the second one extends. also by clicking on the second one it collapses.That means that some how an event triggers and makes them collapse or extend.I have a kind of editing panel inside each extandedPanel which are used to update something on the page. the problem is that by clicking on eachtextbox or fileupload, the second panel collapses again. before any other action. So that I can not enter the textboxes. I can do that if I use tab button on keyboard. but that sucks really.
[Code]....
it might be because the second extender is inside the collapsible panel itself. but why it doesn't stay in extended state?
I am using CollapsiblePanelExtender with following markup:
[Code]....
The expanded panel contains a table. This works fine in Firefox and IE. However, when the panel is expanded in Chrome, no content is shown or rendered in the expanded state.What could be going wrong here?
I have 4 components in my website .
1.) A.aspx
2.) B.aspx
3.) c.ascx
4.) d.js
here is the sample code of my c.ascx
<form
id="form1"
runat="server">
[code]...
have used a CollapsiblePanelExtender on my page.It works fine in IE but when I open it in chrome. It doesn't show contents inside CollapsiblePanelExtender. I am using ajax toolkit with asp.net 3.5
View 4 RepliesI have several CollapsiblePanelExtenders in my formview (both EditTemplate and ItemTemplate). Everything works great, except that they always expand when I move from record to record. I'd like them to keep their previous state (collapsed or expanded). How can I do this with the Formview? Outside the Formview.
View 6 RepliesI have this CollapsiblePanelExtender (below) the problem is that in firefox it gives a horizontal scroll bar under the control which has to expand.
[Code]....
Below is the generated HTML
[Code]....
If I remove the "overflow-y:hidden" from the generated div then the scroll bar goes away, which is what I want....