Just getting started
I upgrade to VWD2010, installed the Ajax ToolKit.
All of the Ajax videos indicate in VWD2010, I'll get a template called AJAX Enabled Web site. I don't have this template in my VWD2010. Is there a way to get the AJAX Enabled Web Site Template in VWD2010?
Is there an ajax enabled website template?
View 7 RepliesMy VWD 2010 Express Edition appears to be missing the console application template. I have searched all the options under new project in VB and C# but it just is not there. I would like to add the console application template option .
View 3 RepliesI'm just getting into AJAX (little late I know) and am walking through some of the tutorials on the ASP.NET/AJAX site. One thing I've noticed is that I cannot get the UpdatePanel to work (meaning, prevent a full postback of the page) in the ASP.NET Web Site template. I can use the EXACT same markup, code, and web.config in the AJAX 1.0-Enabled ASP.NET 2.0 template and everything works as expected.
Markup:
[Code]....
[Code]....
[Code]....
I follow the instruction from this video http://www.asp.net/ajax/videos/how-do-i-use-the-aspnet-ajax-cascadingdropdown-control-extender to create a new web site but I do not see "Ajax control toolkit web site" template to choose after clicking File>New>Web site.
I have AjaxCtrlToolKit4_0 on the machine and in my other project/solution I controls under Ajax Toolkit in the Toolbox. That means I have the Ajax Toolkit. Why doesn't it allow me to create a "Ajax control toolkit web site"?
Another question is do I need to create a separate web site for ajax web service? I already have a web app under a solution. I have a page in this app. This page has some controls such as dropdowns, textboxes, etc. I want to make the dropdowns cascading and do not want to create a separate web site. But the example in the video requires a creation of a new "Ajax control toolkit web site" which includes .asmx file.
I'm trying to consume a WSE enabled Web Service from an ASP.NET Web Site.I've installed WSE 3.0, used the config tool to add WSE info to my web.config and then done an Add Web Reference.I believe that the problem may be that this is a Web SITE, not a Web APPLICATION. As such, the proxy class is generated at runtime, perhaps not adding the WSE magic.I can access the proxy class from metadata, and it's of typeSystem.Web.Services.Protocols.SoapHttpClientProtocol, which as far as I can tell doesn't have any WSE functionality.I realize that this is all old technology, but I don't get to decide what the servers run :(
View 1 RepliesI have a problem. I just enabled ssl on a web site, the technologies used is DotNetNuke, Asp.net, Window Server 2003, and IIS 6. I installed a certificate that was copied on the server through an email, and basically just clicked on the certificate and chose all the defaults.
I set up the certificate by goiong into the web site's properties -> Directory Security -> Server Certificate and choosing the option "Assign existing certificate" and I keep port 443 as the ssl port for the web site.
When i try to access the web site by entering the url [URL]
it shows "Internet Explorer Cannot display the web page" when I diagnose the problem, it says "The host may be down or it may not support a secure connection." I know the site is working by entering in the regular [URL]
Google Chrome gives a bit more information, it displays "Error 107 (net::ERR_SSL_PROTOCOL_ERROR): Unknown error."
Mozilla displays "The connection to somesite was interrupted while the page was loading."
I'm working on a CMS that can run either with or without https enabled on the webserver. I'd like to be able to detect whether https is enabled or not, so that I can act accordingly (for example, display some https-related options to the administrator, and redirect to https for administrator logins).
I'm not looking for Request.IsSecureConnection because that only tells me if the current request is via https. I want something that will tell me whether the current bindings for the site in IIS include a binding for https at the same domain as the current request is on. So, for example, even if the current request is for [URL] and thus not secure, I want to know whether [URL] would work so I can (for example) redirect the user to it if they log in as administrator.
I've had no luck looking for anything in System.Web.Configuration that will tell me about the bindings of the current site, though.
is this something basic or am I missing something?My ASP.NET (4.0) site has a web.config with URL rewrite rules. When I run it in debug mode (local webserver) all the URLs fail because the local web server does not recognize the rules (e.g. I have /register which maps to register.aspx etc.)Is there someway I can get the debug system to recognize my URL rewrite rules? Should I be doing something else?
View 2 RepliesI am having some trouble with my IIS web server & SQL reporting services.
At the current time my site is playing host to both reporting services (/reports & /reportserver) as well as my personal website (domain.com)
Only just recently have I implemented a Theme on my site and as such I have placed a statement in my web.config file directing it to apply a certain theme in the following manner:
<pages styleSheetTheme="General">
Because of this when I try to access the report pages it fails, telling me it couldn't find the Theme. So, what I did was locate the source files for the /reports & /reportserver directories and placed the App_Theme folder in them hoping that would sort everything out.
What I am getting now is the following error:
*Using themed css files requires a header control on the page. e.g. head runat="server" *
Does anyone know how I can get around this? Do I have to hack the SQL reporting aspx pages? I do NOT want to remove the web.config declaration.
I am using VWD 2010 beta 2 and Ajax toolkit 3.031106, the problem is mainly the calendar extender.I have the controls in my new tab but cant drag the calendar extender (just get the crossed black circle cursor). Some control I can drag down other not and none of them shows when I look at the page in my browser.there are no errors displayed at all.
View 13 RepliesI am currently working on a document management system in ASP.NET 3.5 using the Telerik AJAX toolkit. It consists of masterpage with a title banner across the top and a RadTreeview down the left hand side for navigation through the site. The treeview uses a combination of static nodes and dynamic ones. The dynamic nodes are populated via a webservice. When a node is clicked the relevant page is navigated to, reloading the masterpage and displaying the content of the target page.
The problem comes from the fact the treeview's dynamic nodes are populated via a webservice and therefore as the user navigates through the tree to find a document the treeview behaves as you would expect. However, when you get to the bottom of a tree of dynamic nodes the navigation to the page of the navigateurl causes the relevant page to be loaded and then the treeview resets itself to a collapsed state. This means the user could be deep in a nest of documents but when they view one, the tree collapses and they have to start their navigation all over again. This limitation is not going to be acceptable from an ease of use perspective.
According to Telerik, this is the designed behaviour for performance reasons - the node only ever worries about populating the next set of nodes and therefore the treeviews state is not remembered in viewstate.
So, the meat of question is. Is the masterpage/async treeview navigation design pattern a valid one? Are there any other ways to have an ajax treeview on a masterpage, that remembers it's state when another page is navigated to? I have considered a siglepage/updatepanel/partial page rendering model but the opinions I've seen on the net infer that this is bad idea. It confuses users that expect back/forward browser behaviour to navigate through the site but in a single page world they would end up leaving the site.
I also thought that maybe using a single page container and an iframe may work but this seems to be moving away from the "standard" design pattern of using masterpages.
Header controls like create ,delete are created by using templated user controls (ITemplate) .
The controls are working in all pages except the last page when paging is enabled in grid view.
So far, I've seen (and I'm using the following) scripts to show/hide a div or other controls depending on another control in ASP.NET
$('[id$=myRadio_0]').click(function() { $('[id$=myDiv]').show(); });
$('[id$=myRadio_1]').click(function() { $('[id$=myDiv]').hide(); });
and of course, my div in html like
<div id="myDiv" runat="server" visible="false">
and that works fine when the user selects either option of the radiobuttonlist. However, when I assign that radiobuttonlist a value of 1 or yes on my Page_Load on code behind, that isn't (and probably can't be) caught by jQuery, and my div remains invisible even though the control has a value of Yes/1. So, do I need to set the visibility of that div from code behind, or is there a way in jQuery to force a scan of these dependencies after i've set the values for the main controls in code behind?
On this site in the MVC Site Design Templates, is on page 4 I think, is the "Red, White and Black" template. Something I noticed right away is that the only page which the rounded corners seems to take effect on is the home page. I can't figure out why this is....can anyone who's used it or not used it maybe take a look and see what the reason for this might be.
You'll notive that on the home page the entire outter div, div aroung the picture, everything is rounded, but not on the About page, or if you add any other pages, very strange. Maybe this is the why it was designed to be, but why implement rounded corners on only 1 page?
Actually I want to deploy(run) my asp.net 2.0 application using ajax control toolkit2.0 on remote server. Also I have added all the required dlls to the bin folder. Now apart from that Will i have to install ajax extensions on server(OS- Windows Server 2003, IIS 6.0)
View 1 RepliesI've been working on the Music Store tutorial and I cannot get my site to utilize the Album.ascx view template. For now I'll give the short version of my problem because I'm thinking I'm just missing something obvious. I'll provide further elaboration/code if needed. I'm stuck on Part 4. From my understanding, after adding the Shared folder and adding the Album.ascx partial file, I should be seeing this after browsing to the Store Manager Index and selecting an album to edit: Instead, I'm still seeing this: I even copied the code from the dowloaded solution for the Edit.aspx and Album.ascx files. It seems my project is completely disregarding my View Template.
View 1 RepliesI know this is a silly question, but I need to ask it. If we are adding Ajax update panels to several pages of an app and adding javascript to pages, the app will use more of the clients local memory, right?
View 4 RepliesI use Visual Web Developer 2008 Express. I am following a tutorial which uses VWD2005 and says to create an Ajax enabled website. There is no specifically named "Ajax enabled template" in VWD 2008 Express
I think I have created one by creating a new ASP.NET website and adding a ScriptManager and an UpdatePanel to the page and placing the content of the page inside the UpdatePanel ContentTemplate.
I am trying to rule out reasons why my aplication wont work - step by step, piece by piece, from the beginning of the tutorial.
I've asp.net 2.0 ajax enabled web site in which I used Ajax update panels in pages. Now I want to convert it into asp.net 3.5 but it gives errors for Ajax tool kit and script manager and update panel used in pages. I don't want to remove ajax functionality from my site, so is there a way to convert them without removing ajax update panels from pages.On my PC I've installed both VS2005 and VS2008.
View 6 RepliesI have started a simple website using ASP.NET but it is not an AJAX-enabled project. Now what I need is to use an AJAX control specifically Autocomplete) but I do not know how to add it to my website. What I should do guys? Do I need to add something in my library? What should I do in order to see it in the toolbox?
View 2 RepliesI simply can add Ajax toolkit to a project and make Ajax-enabled website at work place, however there is always a white and blank page on my own PC, when try to make the same project.
Although I've installed Ajax Toolkit, and Ajax minifier on both VS 2008 and 2010, but I can't make Ajax-enabled website at home.
I have a website in my hands that wasn't developed entirely by me, and i wanted to add some ajax controls to it (update panel would be the first).
how do i know if my site is already ajax enabled?
And third, in case it is not, what should i do to enable it? I understand this must be a question that has been posted many many times, and i have read some topics with it, but i couldn't quite figure out what to do.
I came across this amazing website built in asp.net and AJAX. Just look at how the pages are. Its amazing. When you add products into shopping cart, it immediately gets added without a postback and there is a sweet little Tooltip that indicates that the item has been added.
Plus, when I click on the 'Login' link, that nice shadow window pops up with the opaque background.
Heres that Ajax-enabled website I came across:
[URL]
I need to Ajaxify my website and add similar features like this one.
I am facing a problem with Ajax-Enabled WCF, it works fine but after sometime (sometimes 5-6 days or sometime 2nd day) its stops working. In order to make it work again i reset the IIS then it starts working again as usual but it is really a hecdache keeping a eye on production server every time. I searched a lot on this but not able to find any solution yet. Please help me out with this.The production environment has IIS 6.0 running on Windows 2003 server.Error details
<servicename> is not defined