I am new to Ajax. I have problem in paging for gridview which is in a update panel.I set the update panel update mode to conditional. The 2nd page records are not display after I click the 2nd page.for ref:
I have a simple form containing a gridview that displays some records. Everything works fine but I was hoping to wrap the grid view inside an updatepanle to prevent a full postback (flickering) when paging.
It doesn't seem to matter what I try, paging always causes a full postback which causes the page to flicker. What am I doing wrong?
Altough questions somehow similar to this have been asked for a number of times, but the question is still unsolved. Here is the question: I have a gridview which is contained in a tab container ajax control which itself is inside an updatepanel. Gridview works excellent and its corresponding methods are fired accurately, but when I enable paging, (e.g.) after I click on page 2, the gridview hides itself. here is my PageIndexChanging method:
I have a GridView that uses custom paging inside an UpdatePanel (so that the paging and sorting of the gridview don't cause postback). The sorting works fine, but the paging doesn't. The PageIndexChanging event is never called. This is the aspx code:
<asp:UpdatePanel runat="server" ID="upSearchResults" ChildrenAsTriggers="true" UpdateMode="Always"> <ContentTemplate> <asp:GridView ID="gvSearchResults" runat="server" AllowSorting="true" AutoGenerateColumns="false" AllowPaging="true" PageSize="10" OnDataBound="gvSearchResults_DataBound" OnRowDataBound ="gvSearchResults_RowDataBound" OnSorting="gvSearchResults_Sorting" OnPageIndexChanging="gvSearchResults_PageIndexChanging" Width="100%" EnableSortingAndPagingCallbacks="false"> <Columns> <asp:TemplateField HeaderText="Select" HeaderStyle-HorizontalAlign="Center"> <ItemTemplate> <asp:HyperLink ID="lnkAdd" runat="server">Add</asp:HyperLink> <asp:HiddenField ID="hfPersonId" runat="server" Value='<%# Eval("Id") %>'/> </ItemTemplate> </asp:TemplateField> <asp:BoundField HeaderText="First Name" DataField="FirstName" HeaderStyle-HorizontalAlign="Center" ItemStyle-HorizontalAlign="Center" SortExpression="FirstName" /> <asp:BoundField HeaderText="Last Name" DataField="LastName" HeaderStyle-HorizontalAlign="Center" ItemStyle-HorizontalAlign="Center" SortExpression="LastName" /> <asp:TemplateField HeaderText="Phone Number" HeaderStyle-HorizontalAlign="Center" ItemStyle-HorizontalAlign="Center" > <ItemTemplate> <asp:Label ID="lblPhone" runat="server" Text="" /> </ItemTemplate> </asp:TemplateField> </Columns> <PagerTemplate> <table width="100%" class="pager"> <tr> <td> </td> </tr> </table> </PagerTemplate> </asp:GridView> <div class="btnContainer"> <div class="btn btn-height_small btn-style_dominant"> <asp:LinkButton ID="lbtNewRecord" runat="server" OnClick="lbtNewRecord_Click"><span>Create New Record</span></asp:LinkButton> </div> <div class="btn btn-height_small btn-style_subtle"> <a onclick="openParticipantModal();"><span>Cancel</span></a> </div> </div> </ContentTemplate> <Triggers> <asp:AsyncPostBackTrigger ControlID="gvSearchResults" EventName="PageIndexChanging" /> <asp:AsyncPostBackTrigger ControlID="gvSearchResults" EventName="Sorting" /> </Triggers> </asp:UpdatePanel> In the code behind I have a SetPaging method that is called on the GridView OnDataBound event: private void SetPaging(GridView gv) { GridViewRow row = gv.BottomPagerRow; var place = row.Cells[0]; var first = new LinkButton(); first.CommandName = "Page"; first.CommandArgument = "First"; first.Text = "First"; first.ToolTip = "First Page"; if (place != null) place.Controls.Add(first); var lbl = new Label(); lbl.Text = " "; if (place != null) place.Controls.Add(lbl); var prev = new LinkButton(); prev.CommandName = "Page"; prev.CommandArgument = "Prev"; prev.Text = "Prev"; prev.ToolTip = "Previous Page"; if (place != null) place.Controls.Add(prev); var lbl2 = new Label(); lbl2.Text = " "; if (place != null) place.Controls.Add(lbl2); for (int i = 1; i <= gv.PageCount; i++) { var btn = new LinkButton(); btn.CommandName = "Page"; btn.CommandArgument = i.ToString(); if (i == gv.PageIndex + 1) { btn.BackColor = Color.Gray; } btn.Text = i.ToString(); btn.ToolTip = "Page " + i.ToString(); if (place != null) place.Controls.Add(btn); var lbl3 = new Label(); lbl3.Text = " "; if (place != null) place.Controls.Add(lbl3); } var next = new LinkButton(); next.CommandName = "Page"; next.CommandArgument = "Next"; next.Text = "Next"; next.ToolTip = "Next Page"; if (place != null) place.Controls.Add(next); var lbl4 = new Label(); lbl4.Text = " "; if (place != null) place.Controls.Add(lbl4); var last = new LinkButton(); last.CommandName = "Page"; last.CommandArgument = "Last"; last.Text = "Last"; last.ToolTip = "Last Page"; if (place != null) place.Controls.Add(last); var lbl5 = new Label(); lbl5.Text = " "; if (place != null) place.Controls.Add(lbl5); }
The paging works if I don't use custom paging, but I really need to use the custom paging. I can't figure out why the PageIndexChanging event isn't fired when I'm using the custom paging.
I have a gridview which is inside the update panel. Also I have setup a multipe filters which works fine. After the search I get the correct returns and page numbers but as soon I switch the pages, it loses its state and lists all the page numbers.
I have a page that has a updatepanel around a gridview control that is within my modalpopup. So you land on the page, there is a link that when clicked will open the model popup. Initially the gridview merely displayed saved records you personally choseto save, well when you selected one, the popup would close and the data from that row would be passed to the gridview within the page to display details.. no issue when it was setup that way.. well eventually it was decided to add a delete option within themodal popup gridview so now when viewing the records you can delete it if not needed. works well.. but now with the updatepanel surrounding the gridview when i click on my "select" link it doesnt execute my
Can someone point me to a tutorial that shows how sorting is done with small images showing the sort direction. I'm using linq-to -sql so I'd like something that shows how dynamic linq works.
Question for Print functionality in ASP.Net GridView control artical. I tried you code in my project, when click print current page, nothing happens.
So I download your code into my test web project "WebSite1", greate, it works.
Then in your CS.aspx page,
I added (which is the case of my project of using AJAX).
<asp:ScriptManager ID="ScriptManager1" runat="server">Â Â Â Â Â Â Â </asp:ScriptManager> <asp:UpdatePanel ID="UpdatePanel1" runat="server">Â Â Â Â Â Â Â <ContentTemplate> <div>Â Â Â Â Â Â Â <asp:GridView ID="GridView1" runat="server" .......................... gridview stuff gose here ......................... </div> etc etc to close all the tags.
Now run, click print button nothing happens, no any error.
Can you see why put updatePanle for AJAX causing problem ?
I also have to pur EnableEventValidation="false" at top of the page to avoid
Is there a way to use the GridView paging and having the links not use JavaScript. So that when you click on the page number 5 (for example) that link is a hyperlink.
In my application, I have one Gridview on click button of one of the column I show Modal popup Extender. I Popup window I display another GridView with paging. And also I want to do all operation such as Update, Delete and Add. As all these are Link buttons none of the event associated with them are firing.
Basically Paging is not working as it is in the Popup Extender.
Is there any way to execute server side events on Modal Popup Extender
i am using LinqDataSource and a gridview control and my paging/sorting works fine but when i add <asp:UpdatePanel than its not working, below is my .aspx page and i am not sure what i am missing...
VS 2008Update PanelIn the update panel, is a gridview, and an asp:panel that contains some other controls, including the button I want to trigger the update of the gridviewThe gridview is tied to a sqldatasource, although I have tried multiple methods to get the data and all failed
Here is the problem:
User logs in and fills out the top part of the form. That submits some data to a table, returns the ID of the row submitted and makes an asp:panel visible (panel.visible=true). This update panel exists inside of the UpdatePanel. The user clicks a drop down list and selects a name. When this happens, another panel becomes visible, using the same process, to allow the user to enter data about the name they selected. So far, everything works.
What Should Happen next:
User clicks "Add" buttonDatabase is updated with the data enteredDatasource refreshesGridview refreshes - It is not visible at load because there are no records for it to show.
What Actually Happens:
User clicks "Add" button Database is updated with the data entered - This has been verified Datasource should update, but not sure it is Gridview does not show.
I have a an UpdatePanel that binds data to a Gridview. Within the gridview I have a select button that will pass the selected id to another Gridview that uses an UpdatePanel. The issue I have is when I select a row in the first gridview one of 2 things occur.
1.) The selection does happen until the Timer refreshes. For instance if I select row 1 in Gridview1, I don't see the 2nd Gridview until the Timer refreshes after 30 seconds.
2.) The selection will happen right away IF I click on the Select button twice. (Don't want this...)
Is there something I'm missing that is causing the first click to the gridview to not select that row immediately? What really gets me is if I put a breakpoint on the Gridview1 SelecteIndexChanged, it fires right away and if I walk through the code it selects it right away.
I have a very simple application that works almost all the time. I am using an UpdatePanel. My script manager is configured to enable partial rendering. My UpdatePanel is configured for conditional update mode. My asynchronous trigger is a timer that runs every 3 seconds. I track unhandled exceptions in the database. I am not getting any unhandled exceptions. Nor am I getting managed exceptions. Now, I had two users side by side running the application today. I had one record in the data queue. The first user did not get updates; her grid did not update. The second user did get updates. The only difference was that the first user was logged in for a long period of time. The second user logged in just before the test. I reviewed the IIS log file and both users were polling the page every 3 seconds for the same data. So why didn't the first user's grid update? The code follows.
I have got the following gridview with a UpdatePanel and approve and save button in each row. How do I create a full postback if approve button is click and asyncPostback if save button is click.
I have a updatepanel with a gridview inside, when I navigate to another page and then click back, the gridview is empty.I have tried to google for a solution but havent found any...
I am using AJAX 1.0. I want to export gridview to excel and it should display loading image when user start exporting excel. I usedUpdatePanelbut is gives some JS error message.
I have a GridView and DetailsView in a Master/Detail relationship inside an Update Panel.The GridView displays a set of records, and when a Select button in the GridView is clicked, the detailsview displays the record for edit.Initially the focus is on the GridView, and when the Select button is clicked, I want the focus to be on the first TextBox inside the DetailsView. This happens only when I remove the UpdatePanel from the form. If the Gridview/Detailsview pair is inside an updatepanel, the focus never goes to the DetailsView.How can I make the focus on the DetailsView inside an UpdatePanel
How can I get a gridview (that is inside an update panel) to update/filter whenever something it typed into a related textbox outside that panel..( possibly in another update panel)?
As in Google. When you start typing, it starts autocompleting for you by looking up words in the background using the text you've typed.
I want, in effect, for a user to start typing in a textbox (say "Order #" textbox) and each time a character is typed, to trigger an update to a gridview that has a 'search param' in it's SQL Datasource SP that plugs the textbox's text into the where clause of the select inside the SP...
make sense? I have the SP and all other related code, I would just need to know how to create a JS function (preferably via server-side using something like:
I've got a fileupload control inside of a gridview so that each row (item from the database) can have an attachment associated with it. I've got a button next to the fileupload control (besides the default browse... button to select the file) to actually take the file and upload it to a file server. This works great if I use this button "Upload". However, underneath my gridview I have another imagebutton that is outside of the gridview, its just sitting on the form / page. The idea of this "Update" button is when end users make changes to the grid I can simply loop through the grid and update the values they have entered to the database. This also works great.
Now here is my issue assume a user has 3 rows in the grid view. On 2 of these rows he decides to add an attachment but he never clicks the "Upload" button he only uses the standard browse button to select the file. Now instead of clicking the "Upload" button that is on the grid view he ends up clicking the "Update" button outside of the grid thinking that it will save his attachments. So I decided to write code to grab the fileupload control from the grid using .FindControls("NameOfFileUploadControl") in my Update button loop where I loop through all the rows. Then I check if myFileUploadControl.HasFile property to see if there exists a file and if there does upload the file then continue with the code.
The issue is when I click this "Update" button .HasFile always returns false even though I can see the text string of the path in the fileuploadcontrol textbox (the standard one next to the browse button). Is it because this goes back to the page load event and checks if it is a post back? What causes this and how can I fix it? Im adding some code because im still confused with this
Protected Sub SaveGrid() For Each Row As GridViewRow In Me.gvLineItems.Rows Dim f As FileUpload = CType(Row.FindControl("fuAttachment"), FileUpload) 'todo: this part is not working If f.FileName.Length > 0 Then 'returns 0 always 'this returns 0. end if if f.HasFile() then 'this also returns false end if Next End Sub
This method gets called on a click of a button. The fileupload control is in an of a gridview that is wrapped inside of an UpdatePanel:
I have an gridview inside of a multiview inside of an updatepanel. I create all this dynamically with code (AutoGenerateSelectButton=true).If the SelectedIndexChanged event is fired, there is a full postback. How can I avoid this?