AJAX :: Literal Control Inside UpdatePanel?
Aug 5, 2010
I should probably say I love these forums, I've been viewing for some time and have found loads of valuable information. I'm having a problem with my project, I have an updatepanel containing several items (Two Daypilot Schedulers and a Literal Control). I have set it to conditional and have it update whenever bookings are added/modified in the schedulers. This all works perfectly! I then have a literal control which contains div items with onmouseover= parameters. The control basically contains a list of pending booking requests. On Page_Load I call a method which populates the list...which works fine.
However, whenever I call the UpdatePanel.Update() method (say, when a booking is added), the schedulers update but the literal control does not. I have gone through the debugger and found that the LiteralControl.Text property is correctly set to the new updated list just before calling the Update() method. So basically it all works perfectly apart from the literal control not updating along with the schedulers in the UpdatePanel.
View 3 Replies
Similar Messages:
Sep 14, 2010
I have a custom control created to autofill the box as typed in. Its working great. But if I put the control inside an Update Panel, it works for the full postback but if partial postback happens (because of the update panel), it does not work.
View 7 Replies
May 28, 2010
I started a new project using VS2010. I have a menu control connected with an XML datasource inside UpdatePanel, Menu control works fine, problem is the styling. using a StaticHoverStyle Css works only after the page reloads, when I click a menu entry, the entry is selected but StaticHoverStyle does not reflects the menu items anymore (of course when I hover the items) Same behave with both Net versions 3.5 and 4. When I remove the UpdatePanel the StaticHoverStyle comes back to life ( post back occurs ).
View 1 Replies
Dec 4, 2010
I have a CheckBox that is located inside a SelectItem Template. The CheckBox has Autopostback= true. Located outside the list view is a label. When the CheckBox is checked, I would like to trigger an the Updatepannel that includes the label. Instead I get an error message "'CheckBox1' could not be found for the trigger in UpdatePanel 'UpdatePanel3'. The code snippet is as follows:
Asp.net Markup:
[Code]......
View 5 Replies
Mar 11, 2011
I've got a fileupload control inside of a gridview so that each row (item from the database) can have an attachment associated with it. I've got a button next to the fileupload control (besides the default browse... button to select the file) to actually take the file and upload it to a file server. This works great if I use this button "Upload". However, underneath my gridview I have another imagebutton that is outside of the gridview, its just sitting on the form / page. The idea of this "Update" button is when end users make changes to the grid I can simply loop through the grid and update the values they have entered to the database. This also works great.
Now here is my issue assume a user has 3 rows in the grid view. On 2 of these rows he decides to add an attachment but he never clicks the "Upload" button he only uses the standard browse button to select the file. Now instead of clicking the "Upload" button that is on the grid view he ends up clicking the "Update" button outside of the grid thinking that it will save his attachments. So I decided to write code to grab the fileupload control from the grid using .FindControls("NameOfFileUploadControl") in my Update button loop where I loop through all the rows. Then I check if myFileUploadControl.HasFile property to see if there exists a file and if there does upload the file then continue with the code.
The issue is when I click this "Update" button .HasFile always returns false even though I can see the text string of the path in the fileuploadcontrol textbox (the standard one next to the browse button). Is it because this goes back to the page load event and checks if it is a post back? What causes this and how can I fix it? Im adding some code because im still confused with this
Protected Sub SaveGrid()
For Each Row As GridViewRow In Me.gvLineItems.Rows
Dim f As FileUpload = CType(Row.FindControl("fuAttachment"), FileUpload)
'todo: this part is not working
If f.FileName.Length > 0 Then 'returns 0 always
'this returns 0.
end if
if f.HasFile() then
'this also returns false
end if
Next
End Sub
This method gets called on a click of a button. The fileupload control is in an of a gridview that is wrapped inside of an UpdatePanel:
<asp:FileUpload Width="90px" Font-Size="xx-small" ID="fuAttachment" runat="server" />
View 1 Replies
Jun 30, 2010
How can i set the value of literal control inside itemtemplate control of gridview from code behind ?(i am using vb.net)
View 1 Replies
Mar 27, 2011
I have a DateTime in my MasterPage.aspx that is outside of UpdatePanel1. There are two Hyperlink controls inside UpadatePanel1 to navigate or to move to the other pages. Full code of MasterPage.aspx is below.
[Code]....
If the user clicks Hyperlink to navigate or move to the other page, the DateTime will change. It means that my MasterPage.aspx render the whole page when the user clicks Hyperlink. I do not want this behavior. I want my MasterPage.aspx only render the ContentPage and the
Hyperlink inside UpadtePanel1. Controls outside UpadtePanel1 like DateTime should not be rendered again. Please advise the code to achieve my example goal.
View 2 Replies
May 7, 2015
<asp:UpdatePanel ID="UpdatePanel1" runat="server">
<ContentTemplate>
<div style="width: 100%; padding-top: 1em">
<img src="Abme/img/rating.png" alt="view" height="25px" width="25px" style="float: left" />
[Code] ....
My ajax rating panel
protected void OnRatingChanged(object sender, RatingEventArgs e) {
SqlConnection con = new SqlConnection(connStr);
SqlCommand cmd = new SqlCommand("Insert into rating(rating,postid) values(@rate,@pi)", con);
cmd.Parameters.AddWithValue("@rate", e.Value);
cmd.Parameters.AddWithValue("@pi", Request.QueryString["ID"]);
[Code] ....
The rating value get inserted to database async but updated rating is not displayed after update. I have to refresh page in order to display updated ratings.
View 1 Replies
Dec 9, 2010
If I have an array variable singletext with javascript code like below
[code]...
How can I assign the value of singletext[0] and singletext[1] to a literal control literal1, that I grab from the code behind?
View 2 Replies
Dec 6, 2010
Explaination in detail I have a tree view control on left of my page and AjaxToolkit:TabContainer on the right,consisting of 9 tabs in it (I have developed individual controls and added to the tab panels). On selecting a value from the tree view control the I am refreshing the values inside all the tab panels. There is a method reload written on all the controls which are called on tree view click which sets the value of the selected tree item in properties in all the controls and also refreshs them. Its a big performance issue for sure which i need to improve on but that would come later.
My problem
1. In the Main tab (ascx control) consists of asp:chart control which I am populating and it also consists of 2 buttons in which ModalPopupExtender would open up another 2 controls on button click within this control. Now on the tree view click I am calling
the reload of Main Tab which internally called the reload function of these 2 controls also
On Tree view click
Maintab.reload
{
ModalPopupExtender1.reload
ModalPopupExtender2.reload
}
Secondtab.reload
Thirdtab.reload
If I populate the asp.chartcontrol without reloading the ModalPopupExtender1.reload ModalPopupExtender2.reload it works great but when I call both ModalPopupExtender1.reload
ModalPopupExtender2.reload it shows up and goes away.
Any thing i am missing on ? How to make chart control stay on the page and not vanish. I tried making it visible again. The main page contains a chart control which comes and goes away and does not stay only if i comment out the reloading of these usercontrols it stays visible with values on the main page else goes away.
2.Performance problem- I am not sure how to lazy load the content inside the tab panels so that controls should have the selected item for tree view click and can populate thereon.
3. This is how I call my user controls to reload on the treeview click from within the main page.
PEGeneralInfoPortfolioProfiler1.PortfolioCode = strPortfolioCode;
PEGeneralInfoPortfolioProfiler1.ReloadControl(1);
View 2 Replies
Jan 8, 2010
I have put my gridView inside an UpdatePanel with Timer control for auto refresh.The gridView has a linkButton column which is bounded to referenceNo column from database.
On click of this link button i want a panel to get visible. This Panel contains details corresponding to the referenceNo shown in differnt controls (mostly texboxes). Do i necessarily need to put the panel inside the Update Panel.If not how do i do it?
I have tried putting panel outside UpdatePanel, but it doesn't show panel on clicking the linkbutton nor does the values are updated inside this panel (if panel's visibility is set to true by default for testing purpose).
View 4 Replies
Sep 24, 2010
I have a gridview inside UpdatePanel.
Inside gridview there is a dropdownlist and a button on each row. On button click I am opening a panel through Modal popup extneder.
Inside that pop up there is again a dropdownlist. I am adding an item into this dropdownlist based on the selection from the dropdown inside gridview.
like ddl.items.insert(0,'xyz');
But first time this inserted item is not getting reflected in the dropdownlist. But after one postback this item is getting reflected.
View 2 Replies
Oct 4, 2010
I'm trying to add and edit an image which is located in a detailsview which is inside an UpdatePanel. After I read relevant topics in the forum I installed the Ajax Control Toolkit. Below is my source code. When I used it only for insert new image it worked great. The problem caused when I tried to implement it on the Edit mode, i.e. when I tried to edit the image and upload a different image. Unfortunately it didn't work as I hoped. Nothing happend and the image hasn't been changed. I also tried to change the IDs (AsyncFileUpload ID) to be the same in both places but it didn't work either.
The source code:
<asp:DetailsView ID="dvMovie" runat="server" Height="50px" Width="695px"
AutoGenerateRows="False" DataSourceID="sdsMovieById"
BorderColor="#E7E7FF" BorderStyle="None" BorderWidth="1px" [code].....
View 2 Replies
Sep 13, 2013
Difference between Label and literal control in Asp.net and also state when to use what???
I am completely confused as till nw i was going with label control and suddenly i am shock to see that literal control also plays similar role...
I am confused same say's that difference is only regarding to span tag i mean label control output comes with span tag... but who care's when we can do same things with label why to go with literal control
View 1 Replies
Mar 11, 2010
I am currently using a asp.net 2.0 with visual studio 2005.
I am trying to build a web application using ajax.
but when I drag the ajax updatepanel on asp.net page it is not resizable,so how should i put other controls on it?
View 4 Replies
Jun 7, 2010
Why server control are not allowed inside literal server control
View 1 Replies
Jul 2, 2010
I am using a third party control that upload images. It works fine when i place it on aspx page (Outside DetailView) but I want to place that functionality inside EditItemTemplate but it just never work .
[Code]....
View 1 Replies
Apr 15, 2010
I have a menu of buttons inside an UpdatePanel (UPD_Menu) so that buttons can be enabled/disabled without refreshing the entire page. When a user signs in, the Sign Up button is disabled and the Profile button is enabled. Likewise, when the user signs out, the Sign Up button is enabled and the Profile button is disabled.
Inside this UpdatePanel (UPD_Menu), along with the buttons, is a ModalPopupExtender that is fired by the Sign Up button (TargetControlId="BTN_MenuSignUp") that pops up a dialog Panel (PNL_SignupProfile) that contains yet another UpdatePanel (UPD_SignupProfile) that contains a Submit button as well as a Cancel button (CancelControlId="BTN_SelectCancel").
The behavior I am getting is when the user clicks no other button than the Sign Up button, the dialog (PNL_SignupProfile) pops up and is modal. The Submit button closes the dialog and makes the once-hidden panel appear under the menu of buttons. This is not good as only the inner UpdatePanel (UPD_SignupProfile) should be updated without affecting the outer UpdatePanel (UPD_Menu). The Cancel button works as it should by simply closing/hiding the dialog.
If a user clicks any other button in the menu first, nothing happens ( no codebehind yet) but when the dialog (PNL_SignupProfile) is shown, the Cancel button causes the hidden Panel (PNL_SignupProfile) to appear under the buttons. I've tried many different things to no avail...including putting the dialog panel in different places and even controlling the ModalPopupExtender from code.
The only code I have so far is for handling the signin/signout and enabling/disabling the signup and profile buttons based on user signin. There is no code yet to handle the menu of buttons nor the submit button of the popup dialog.
Here is the code:
[Code]....
[Code]....
[Code]....
[Code]....
View 4 Replies
Dec 1, 2010
I am using FileUpload control inside UpdatePanel, but cant get it working and keep getting error : "Object reference not set to an instance..." on line: If fuAvatar.PostedFile.FileName <> "" Then I have checked several forum and people mentioned that we need PostBackTrigger but i just cant get it working and keep getting the "Object reference not set..." error. My FileUpload control is inside a panel and along with another control, and the upload occurs when user click on Finish button.
[Code]....
And my codebehind is:
[Code]....
View 12 Replies
Dec 13, 2010
I'm having a problem with a dropdown throwing an error:
Uncaught Sys.WebForms.PageRequestManagerServerErrorException:
Sys.WebForms.PageRequestManagerServerErrorException: Invalid postback or callback argument. Event validation is enabled using <pages enableEventValidation="true"/> in configuration or <%@ Page EnableEventValidation="true" %> in a page. For security purposes, this feature verifies that arguments to postback or callback events originate from the server control that originally rendered them. If the data is valid and expected, use the ClientScriptManager.RegisterForEventValidation method in order to register the postback or callback data for validation.Only Sometimes.
I am using an updatepanel, with a bunch of dropdowns that have an onchange for Javascript, that use ajax (partial page postback). The problem is: I have two dropdowns at the top (also inside the updatepanel) that let me change the current month or year. Sometimes...they change the page (response.redirect), and sometimes they throw that error above. Also, they are the Only two buttons on the page that aren't doing an "onchange" and then ajax stuff....they are actually posting back the entire page to the server (or trying to).
View 3 Replies
Nov 8, 2010
TThis time I'm facing some unusual behavior with a web page that I'm developing. I have a table with several controls and gridviews and stuff. At some point of the table, i have to show some rows (they were hidden) when the users clicks a button. I was doing this with a PlaceHolder, but now i have to do it without the postback being displayed. I thought: "That should be easy, all i have to do is to put the PlaceHolder inside an UpdatePanel, and that's it" but no, no no nooo!! NOTHING IS THAT EASY!!! It actually works but it puts the hidden rows at the top of the page, not where they suppose to go!!My code is the following:
<asp:UpdatePanel runat="server" ID="uplAutoridadesAmbientales">
View 3 Replies
Apr 19, 2010
I have an animationExtender, I have an update panel iniside of it with the updatemode Conditional and I have the button that triggers it, but whenever I click that button, the whole page reloads and the animationExtender closes. Why would it do that?
View 1 Replies
Jun 16, 2010
I have a PopupControlExtender inside of the UpdatePanel. I use it to edit some of the values on the website.
Basicly it looks like this. If you have PopupControlExtender inside of th update panel whenever a user triggers a partial postback javascript creates the popup panels outside of the UpdatePanelControl - to make sure they are always on the top of other elements. So after every postback you get more and more elements with the same clinetIDs.
Here is a code from Firebug - you can notice Panel1 and all the controls inside of it being generated 3 times when i load a page (once) and twice after two partial postbacks:
[Code]....
Oh and i use it actually inside the listview that itself is embeded in the update panel so i cant really use it outside of the update panel.
View 6 Replies
Sep 16, 2010
I have a page with two ajax toolkit popupcontrol extenders, both have a Linkbutton inside the popup window, which is inside a panel and updatepanel. The difference is the second one (Linkbutton2) is inside a Gridview, which is also inside a Updatepanel.
The first one works fine, but the second one does not fire when click on it. The code is as follows:
[code]....
View 2 Replies
May 10, 2010
I have a couple of dropdowns inside an Ajax Update Panel. When I try to rebind the controls or set the selected index of the drodowns inside the panel, they don't respond.
For example, I update the database records and need the dropdowns to display updated data. I set the data source for the dropdowns, rebind them and update the UpdatePanel, but it still shows the old data.
[Code]....
View 4 Replies
