I have a masked edit extender extending a text box. I enter the date 01/01/0001 then change a selection on a drop down list inside the same update panel with the autopostback property set to true. The date is changed to 01/01/1910.
[Code]....
I have a textbox with a MaskedEditExtender and a MaskedEditValidator attached to it.
I would like to set the mask so that I can enter any email address which is checked by the validator.
I have the regular expression for the validator, so the only question is what would the mask look like?
basically all I need is a mask that allowes any number of characters, but if I set it to ???? then it allowes only 4 characters but I don't know up front what the length if the email address is.
I have a textbox ,and masked Edit extender and Validator Attached to it i want to validate the textbox time
View 1 RepliesI'm using the masked edit extender in one listview control for inserting new records. When the new record is inserted, two other listview controls are displayedeach showing one record from the table it's reading from. I'm using the masked edit extender in both of these listview controls. When I try to edit the record in the first listview, there is no problem. When I try to edit the record in the second Listview, I get a no source available error. In the error info, a path is displayed that I'm not familiar with. This path does not exist on my machine, it must be built into the control:
Source File Information:
Locating source for 'd:hgactServerAjaxControlToolkitMaskedEditMaskedEditExtender.cs'. Checksum: MD5 {a1 a5 bc 1f 6e 6a 26 fe 52 f6 f6 3c 17 b2 2d 4e}
The file 'd:hgactServerAjaxControlToolkitMaskedEditMaskedEditExtender.cs' does not exist.
Looking in script documents for 'd:hgactServerAjaxControlToolkitMaskedEditMaskedEditExtender.cs'...
Looking in the projects for 'd:hgactServerAjaxControlToolkitMaskedEditMaskedEditExtender.cs'.
The file was not found in a project.
Looking in directory 'C:Program FilesMicrosoft Visual Studio 10.0VCcrtsrc'...
Looking in directory 'C:Program FilesMicrosoft Visual Studio 10.0VCatlmfcsrcmfc'...
Looking in directory 'C:Program FilesMicrosoft Visual Studio 10.0VCatlmfcsrcatl'...
Looking in directory 'C:Program FilesMicrosoft Visual Studio 10.0VCatlmfcinclude'...
Looking in directory 'C:'...
The debug source files settings for the active solution indicate that the debugger will not ask the user to find the file: d:hgactServerAjaxControlToolkitMaskedEditMaskedEditExtender.cs.
The debugger could not locate the source file 'd:hgactServerAjaxControlToolkitMaskedEditMaskedEditExtender.cs'.
The two listview controls are not a master/detail view, just two records that related information.
How can I use auto-tab functionality with a masked edit extender?
I'm using a masked edit extender on a text box for inputting a date value, and I want to auto-tab to go to the next box once the date is filled in, but the autotab is always matching the javascript value since the mask is in the text box and tabs as soon as I mouse up any key in the box since the length will always match.
I have a masked edit C99999 as a mask and allow a "C" or "D" as the beginning character.This C or D is added to an existing number when that application is Denied or Canceled.The trouble is the masked edit is in overwrite mode and destroys the original app#.Can I make it INSERT or do I need to do an append of the original number to the newprefix in the update code?I hope this isn't another RTFM question... <BLUSH>
View 1 RepliesI'm receiving the following error from my hosting site:
Reference required to assembly 'System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' containing the base class 'System.Web.UI.ExtenderControl'
The bin file with the toolkit has been uploaded to my site.
I'm using Web Developer 2010 Express and built my project for a target 3.50 framework which is the framework on my hosting site. I have about 8 pages that are working fine in prod.
The control works on my local machine.
I have found a problem with the Masked Edit Extender when using it with a culture of Azeri (Latin, az-Latn-AZ). I have not found anywhere that states that the control should not be used with languages that is not included in the list of languages that the ajax control toolkit is translated.
The currency symbol for Azeri is "man." the first problem is that the mask displays this as "man," but the comma is the decimal indicator for Azeri.
Scenario 1
When the DisplayMoney property is set to "right" and the currency is removed by the masked editors script the resulting value looks something like "12,12," the second comma then invalidates the numeric value and all my compare validator which also acts on the same textbox keeps failing because the value is not numeric.
Scenario 2:
When the DisplayMoney property is set to "left" there is always a "0," added to the string because the the script of the masked editor removes the man then gets to the comma (man",") sees it as a decimal indicator and adds the 0 before the comma this happens on the first blur of the textbox each resulting onblur event will add another 0 to the value. But the value is already invalidated by the fact that it again has two commas like 0,12,12.
I get this result even with the Ajaxcontroltoolkit sample site, the changes needed to sample site's MaskedEdit.aspx page can be seen below.
For scenario 1, change the first MaskedEditExtender on the MaskedEdit.aspx page to the following:
[Code]....
For scenario 2 effect change the first MaskedEditExtender on the MaskedEdit.aspx page to the following:
<ajaxToolkit:MaskedEditExtender ID="MaskedEditExtender2" runat="server"
I'm using MaskedEditExtender for numeric field (i.e.%). In that field, user can enter the percent value between 1 and 100 and also decimals like 12.34. Doing this, I have used this code which is not working.
<ajaxToolKit:MaskedEditExtender ID="TestDetailsControl_maxTotalScoreMaskedEditExtender"
runat="server" Enabled="True" ErrorTooltipEnabled="True" Mask="999.99"
MaskType="Number" AutoComplete="true" AutoCompleteValue="" InputDirection="LeftToRight"
[code]...
I am working on an app and have added masked edits to some of the textboxes. On Google Chrome v6.0.472.62 the backspace button is inoperative along with the delete button. I have found no method around this. It also functions incorrectly on the ajax toolkit website: [URL]
Chrome is fairly popular and I doubt I can use this code with this issue.
How can i reset ajax mdal popup extender.. If user first open the modalpopup on the button click then do some events in popup and after closing the popup if user next time opens the popup i want it t to be refershed and same as i have created..
View 5 RepliesI am using AjaxCalendar Toolkit :
<asp:TextBox CssClass="form-control" ReadOnly="true" runat="server" id="StartTime"></asp:TextBox> <asp:CalendarExtender ID="Start_CalendarExtender" runat="server" Enabled="True" TargetControlID="StartTime">
</asp:CalendarExtender>
<asp:TextBox CssClass="form-control" ReadOnly="true" runat="server" id="EndTime"></asp:TextBox> <asp:CalendarExtender ID="Start_CalendarExtender" runat="server" Enabled="True" TargetControlID="EndTime">
</asp:CalendarExtender>
And On Page Load i have done this to avoid selecting previoud dates in start date :
protected void Page_Load(object sender, EventArgs e)
{
Start_CalendarExtender.StartDate = DateTime.Now;
}
Now i want to do that user cannot select end date less than start date , e.g if he choose 2-July-2014 ( as a start date) then he could not choose (1-July-2014) as End date , dates prior to Start Date must get disabled in End Date Calendar Extender.
1) How can i display the date only till current date in ajax calendar extender ?
2)How to validate the date in one TextBox with the Date in another TextBox ?
am developing an application using asp.net+ajax.i used calender extender control to select date and showing that date in a text box.my requirement is when select date from the previous year (i.e 2009) from the calender extender control...then a message should show like"you should not select the previous year date" and immediately current day date should fill in textbox.
View 4 RepliesI have an Usercontrol which has a update panel that being postback by a timer, and it is nested in a parent page which has its own update panel. Every time that the update panel in UserControl cause a postback to server my main page's scrollbar being reset to top or buttom of the page. I enabled viewstate of parent page but nothing, and when enable parent page's MaintainScrollPOsitionOnPOstback it cause a problem for Usercontrol updatepanel postback !
View 2 RepliesI have a kiosk application that uses master pages. There is a refresh meta-tag on the master page (or I can add it programmatically using Page.Header.Controls.add(metaTag), it makes no difference for my problem). When the user does not interact with the aplication it should return to the default page. But when the user does react using async postbacks only a partial postback is performed which does not reset the html meta refresh header, so it just keeps on ticking and after x seconds the page redirects to the default page. How can I avoid this from happening. The meta-tag can not be in the updatepanel so even though I can manipulate it from the code-behind when the async postback happens, any changes I make (for example sometimes when the user makes a mistake he should be redirected to a clean version of the page he is currently on after showing a modal message, so I have to change the url of the meta-tag content to no longer use the default page, but the current page) are not implemented.So the main question is, how can I manipulate (or reset in case of refresh meta tag) meta-tags in an async postback ?
View 2 RepliesI am having a masked textbox for inserting date.But if i am inserting any invalid date (i.e 40/34/5000) it is accepting but it is give out of range error at runtime.I want to avoid this problem during inserting time to display any error message to user as'Invalid Date' using any ASP.Net controls.Pls suggest me which control I can use to have this type of validation and pls send me the code as well.Pls respond me ASAP.
View 5 RepliesI have a Username and Password field on webform and a Submit button.Username ia validated through database on button click.Each time when i click on submit button and if Username already exist then my password gets to be removed due to postback.Please give me some solution so that when i just defocus my username field it will automatically check and display message if it exists.Please donot give Textbox ontextchanged event with update panel in conditional update mode because it will not work for me because i am using devexpress tools on my webforms.
View 1 RepliesI am new to Ajax and want to find out if what i am about to do is correct. I want to create an aspx page that has two buttons.
One button called GetData, to connect tothe database and get table information into a grid view
the other button called Create new row, that open an input form in a modal extender to add new row into a table
My question, is that do I use the same input form for add and edit functionality or I create two forms one for Add and another for edit.
The next question, how can i call the edit input form from a grid view.
I have a web form, and an "add vendor" button. Click the button, a modal dialog pops up (ajax:ModalPopupExtender). User selects one of two radio buttons which shows a data bound asp:View in an update panel - this view is data bound to a single row and must be populated by the user. However I also want to provide a cancel button which should close the modal dialog and reset the bound view.
However what is happening is that the ModalExtender closes, but when the "add vendor" button is presented again, it's still bound to the same data. Do I need to clear my data source? How so I reset the forms/views so that when the 'add vendor' button is clicked again the form is presented as it should be (IE the 2 select options, picking one re-binds the asp:View)?
I have the following mask edit extender:
<asp:MaskedEditExtender
ID="txtVersion_MaskedEditExtender"
runat="server"
Enabled="True"
Mask="99.99"
MaskType="Number"
TargetControlID="txtVersion">
</asp:MaskedEditExtender>
It allows to type only decimal values, like 15.15. But when I save its value into a decimal variable the format chages to 1515.
Dim Version As Decimal
Version = CDec(txtVersion.Text)
Im trying to connect up a MaskEditExtender at runtime but the Mask Edit Extender doesnt seem to work.
Heres the code:-
[Code]....
I can do DropDownList
<asp:DropDownList ID="YearList" runat="server" oninit="YearList_Init1" />
but I can't edit text manually there. I can do Text box with Ajax DropDown extender but I can't select->Insert to textbox there. Only display. how to create DropDownList which I can edit manually ?
I'm using ajax calendar extender to store an event in database. I also need the time of event, when i select the date.. Is there anyway to display both date and time using ajax calendar extender?
View 2 Replieshow can change target control ID of an autocomplete Extender without refreshing page or using update panel
exactly with ajax!!!
and how can add an new instance of server controls like Ajax control toolkit or Standard controls like TextBox,Button,..