AJAX :: Unable To Maintain Focus On Dynamically Created Textbox
Jun 30, 2010
i have a WSS 3.0 Webpart that contains an UpdatePanel with a customized SPGridView. I want to provide instant filtering of data by adding a textbox below the column header when the column shall be filterable. There is a jQuery based solution for this on the net, but it's totally client side and doesn't work with paging, so i tried it on my own.
In the CreateChildControls of my SPGridViewExt class i have :
[Code]....
I've also overridden the DoFilterPostBackEventProcessing method to create a "[ColumnName] LIKE '%[textbox.value]%'" filterExpression for my datasource which also creates the LIKEFILTER_COLUMN and LIKEFILTER_VALUE ViewState Items so i can identify the textbox that should refocus on after the postback. The filtering itself works great, but whatever i try, i am not able to set the focus to the textbox after entering the first letter.
[Code]....
All these four methods don't work. The registerstartupscript call doesn't even render the script when i search the page source after postback. I also tried to add a HiddenField to my webpart and set it's value to the control id of the textbox in onfocus, then register a startupscript in OnLoad that focuses the control if the HiddenField has a value, but to no avail.
View 2 Replies
Similar Messages:
Feb 25, 2016
I have created dynamic gridview with textbox
here is the link:
[URL]
but whenever i created new row i have lost focus on textbox. Instead of focus on new row (first column) cursor focusing on somewhere else.
how i can focus on textbox in new row.
View 1 Replies
Sep 20, 2010
I have a script which creates a dynamic textbox (and more) in an AJAX async post back. But when I try to acess the textbox I am told "Object reference not set to an instance of an object". I have been strugleing with this for a long time. This is written in C# .Net 4. The line causing the problem is the very last one where I have tbGameName.Text.Trim()
[Code]....
View 2 Replies
Dec 11, 2010
i have three textboxes in a page and one datagird and 1 timer control, i have 2 update panels.
i placed (all textboxes) in one update panel and i placed (data gird and timer control) in an other update panel, because i want to reset or clear all fields when cancel button is clicked so that update panel should be updated,and where timer control tick event is fired i rebind the gird or refresh the gird, i have done this and it works properly but problem is that when i am going to write some text in any textbox or i want to focus on any text box it should lost focus when timer control tick event is fired so how can i maintain focus, or even how can i get focus of current control and after firing of timer control tick event i should reassing focus of such control
my code is below
[Code]....
View 2 Replies
Apr 24, 2010
I have ONE <asp:Button ID="btnAddUC" runat="server" ......./> and ONE <asp:Table ID="tblUC" runat="server"...> on my page. User clicks on btnAddUC, user control is added to the page [user can add 'n' user controls to the page]. here I have no problem, adding user controls to the page on user clicks.
My user control has ONE <asp:DropDownList ID="ddlItems" runat="server" ......./> and ONE <asp:CheckBoxList ID="chkItems" runat="server"..../>. I am exposing "ddlItems" by public method, "chkItems" is not exposed. "chkItems" is binded on SelectedIndexChanged event of "ddlItems".
Execution scenario:
User adds user control to the page, select item from the "ddlItems" ( Note: "ddlItems" is exposed by public property ) , "chkItems" is populated ( using ddlItems.SelectedItem.Value ) . User checks some checkboxes in "chkItems" and then decide to add one more user control. When the second user control is added to the page, checkboxes in the first usercontrol lose their state and apeears unchecked (NOTE: user checked some checkboxes and then added another user control).
I want to put checked beckboxes index in session ( Before another control is added, which event I should use, because at LOAD event there is nothing).
I was able to restict SelectedIndexChanged event to only that user control whcih generated it (checking _EVENTTARGET)
View 9 Replies
Aug 27, 2012
I have some text boxes in my form.
In all text boxs autopostback=true
and i will do some calculation in textbox1_TextChanged
then I will use textbox2.Focus() for focus.
With out update panel its work fine
But with in update panel it does not focus...
View 1 Replies
Feb 10, 2010
I have a dynamically created address user control (on a customer administration screen) that is created through the use of a place holder. A customer can have multiple addresses, so they dynamically dropped onto the page.
I have got this far, but now I need to be able to save the updated addresses for the customer but I can't get any event to fire on the user controls. When I check to see run plhAddress.HasControls() it returns false?
The way I am generating the user controls is as follows.. private UserControl LoadControl(string UserControlPath, params object[] constructorParameters)
View 9 Replies
Oct 21, 2010
I'm unable to get the check box value from dynamically created gridview in vs2010. I'm using the ITemplat class to create the templat column.
View 2 Replies
Jan 20, 2011
<asp:GridView ID="GridView1" runat="server" >
<asp:TemplateField HeaderText="Token" SortExpression="Token" HeaderStyle-Width="100px">
<ItemTemplate>
</ItemTemplate>
</asp:TemplateField>
</asp:GridView>
update:
after i view the source code of the page thsi is what i see the id of a textbox that i have created dynamic.
ctl00_ContentPlaceHolder1_tabControl_tabUsers_MyControl1_gv_ctl02__token0_3
OnRowUpdating:
TextBox _token = gvOrg.Rows[e.RowIndex].Cells[7].FindControl("_token " + e.RowIndex + "_" + rowId) as TextBox;
Update end:
i am adding few textbox dynamic in OnRowDataBound and whe i try getting the value then i am getting null
here is my code:
[Code]....
View 2 Replies
Jan 15, 2010
I use this method for inserting a textbox in a tablecell
[code]....
But it doesn't work. beacuse it doesn't find the textbox created previously.
I've put also EnableViewState="true" in the file aspx.
View 2 Replies
Sep 27, 2011
i am creating Textboxes at Runtime with something like this
Code:
Dim cnt As New TextBox
cnt.ID = "cont_" & x
If multiline Then
cnt.TextMode = TextBoxMode.MultiLine
End If
These are dynamically created fields. so what i want to do is to use this following JQuery on this textbox
Code:
$(document).ready(function() {
$("#contentbox").keyup(function() {
var box=$(this).val();
var main = box.length *100;
var value= (main / 145);
var count= 145 - box.length;
if(box.length <= 145) {
$('#count').html(count);
$('#bar').animate({"width": value+'%',}, 1);
}
return false;
});
});
and what this function does it count the number of Characters that have been typed in a Textbox. so i am displaying the remaining characters. So that is working fine on my example because the Element is known at Early Binding. Now my question is what if the textbox is created dynamically ?
Code:
contentbox
this is the name of the Textbox in my example. how do we use a J Query in Dynamically created Textbox.
View 3 Replies
Oct 15, 2010
how can store the text value of dynamically created textbox in database.
using System;
using System.Data;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Data.SqlClient;
public partial class frndslambook : System.Web.UI.Page
{
SqlConnection con = new SqlConnection(ConfigurationManager.ConnectionStrings["ConnectionString"].ConnectionString);
SqlCommand com1;
SqlCommand com;
SqlDataReader dr1;
static string[] exp;
static string exp1;
static long c;
TextBox[] textBoxArr = new TextBox[c + 1];
protected void Page_Load(object sender, EventArgs e)
{
com1 = new SqlCommand("Select * From slambook Where username=@username", con);
com1.Parameters.Add("@username", SqlDbType.NVarChar).Value = Session["userfrndname"].ToString();
try
{
if (con.State == ConnectionState.Closed)
con.Open();
dr1 = com1.ExecuteReader();
if (dr1.Read())
{
string exp1 = dr1["slambookfields"].ToString();
long c = Convert.ToInt64(exp1.Length);
Label[] l1 = new Label[c + 1];//array of lables
TextBox[] textBoxArr = new TextBox[c + 1];//array of textboxes
exp = (exp1).Trim('^').Split('^');
for (int i = 0; i < exp.Length; i++)
{
Panel frndstextBoxLabelGroup = new Panel();
l1[i] = new Label();
l1[i].ID = "frndslambooklabel" + i.ToString();
l1[i].Text = exp[i].ToString();
l1[i].Visible = true;
textBoxArr[i] = new TextBox();
textBoxArr[i].ID = "frndslambooktextbox" + i.ToString();
textBoxArr[i].Visible = true;
//Initializing the TextBox so that it is not rendered in the browser
frndstextBoxLabelGroup.ID = "frndstextBoxLabelGroup" + i.ToString();
fspfrndslambook.Visible = true;
// Pnl_TextBox.Controls.Add(br);
frndstextBoxLabelGroup.Controls.Add(l1[i]);
frndstextBoxLabelGroup.Controls.Add(textBoxArr[i]);
fspfrndslambook.Controls.Add(frndstextBoxLabelGroup);
}
}
}
catch (Exception exc)
{
}
finally
{
con.Close();
}
}
protected void fsbfill_Click(object sender, EventArgs e)
{
com = new SqlCommand("Insert Into slambookans (slambookfields_ans,sender,receiver) Values(@slambookfields_ans,@sender,@receiver)", con);
for (int i = 0; i < exp.Length; i++)
//{
//textBoxArr[i] = new TextBox();
com.Parameters.Add("@slambookfields_ans", SqlDbType.NVarChar).Value =textBoxArr[i].Text;
}
com.Parameters.Add("@sender", SqlDbType.NVarChar).Value = Session["username"].ToString();
com.Parameters.Add("@receiver", SqlDbType.NVarChar).Value = Session["userfrndname"].ToString();
try
{
if (con.State == ConnectionState.Closed)
con.Open();
int i=com.ExecuteNonQuery();
if(i!=0)
Response.Write("Success");
else
Response.Write("Fail");
}
catch(Exception exc)
{
}
finally
{
con.Close();
}
}
}
View 12 Replies
Jan 12, 2010
I'm using multiple file upload. I'm following this link [URL] . I can able to save multiple files. Now i want add textbox to all file upload. I can add HTML Text box. I don't know how to find that? I'm using following code to upload multiple files..
[code]....
View 4 Replies
Mar 17, 2010
I want to set focus to textbox B after a user has entered data in textbox A. Both textboxen reside within custom controls which reside in the same accordion pane. The custom controls override the Focus method and set focus to the textbox they contain. Focus works fine until I place the controls inside an accordion pane. I've tried ((ScriptManager)Page.Master.FindControl("ScriptManager1")).SetFocus(TextBoxB) from within the TextBoxA_ValueChanged event handler to no avail.
View 1 Replies
Aug 25, 2010
I dynamically create gridview, and in this grid I have template field also
field.HeaderTemplate = New GridViewTemplate(ListItemType.Header, col.ColumnName)
field.ItemTemplate = New GridViewTemplate(ListItemType.Item, col.ColumnName)
grdEmpty.Columns.Add(bfield)
but when enter some value in text box in this template field i lose value on postback. And also on postback I lose all template field and i must re-create this grid.
My goal is: I have button and i want to add new row in this grid, but i want to have old value also.
View 1 Replies
Oct 6, 2010
I want to dynamically create asp textbox objects (as well as other types) with id's named sequentially up to a number the user decides but I'm having a problem getting my code behind to recognize these dynamically created objects. In "div1" below I manually create the objects and I have no problem getting the values in Sub cmdSaveDiv1Info_Click. My dynamically created code generated in Page_Load routine is identical to that in "div1" except for the textbox ID's yet when I try to retrieve the values the same way in cmdSaveDiv2Info_Click I get an "object reference not set to an instance of an object" error on the "Dim d2Year as String.." line.
[code]....
View 2 Replies
Feb 25, 2010
I have a page that contains many textboxes. It is like 9 textboxes for everyday in a month, and their numbers and IDs are changing dynamically for every month change on the page. I'm creating them in many for loops like;
[Code]....
This was just an example not real code. Now I want to add those textboxes the same TextChange event. How can i do it? I'm a little bit newby at asp.net. Sorry about that...
View 5 Replies
Nov 6, 2010
I am trying to create a comment system in which the comments will be displayed and will have one level of reply to the comment.
I now have text boxes and buttons dynamically created under each comment for users to submit replies to each individual comment.
I am having difficulty obtaining the contents entered by the user within the text boxes.
[Code]....
The GetComment method is called at pageload. I am able to obtain the Id of the comments that the reply corresponds to, but not able to obtain contents entered by user in the reply text boxes, they show up as blank.
View 8 Replies
Jul 29, 2010
how can I allow only alpha characters into a dynamically created textbox? I don't think I can use a regular expression validator for this issue. Unfortunately, I cannot use Ajax for this issue either.
View 8 Replies
Jun 2, 2010
My problem is as follows. I have a custom GridView control where I generate the Template fields for each column. I'm using someone elses class that extends the Itemplate and returns lables for ItemTemplate, and TextBoxes for EditTemplate.
I need this in order to implement bulk edit for the gridview where users press button Edit and all fields become textboxes, they can then change the values, and click Update button at which point I need to be able to retrieve the values from the TextBoxes in these Template Fields.
What I have tried thus far: when user clicks Edit button, my dynamic code builds the columns and specifies that the Template field is an EditTemplate, it then adds these columns to the grid view. The gridview shows the textboxes with all values retrieved from sqldatasource.
When I press the Update button, the page does a postback, as I can see Page_Load event fire, I check for a flag that I previously set when the Edit button was pressed (I store it's value in View State) and call the Update method.
In it I iterate throught the gridview rows collection, check that the RowType of each row is DataRow and call GridView.UpdateRow(i, false), passing each rows index to the UpdateRow method.At this point I have tried everything I can to find the values stored in the textboxes, but I cannot find any of the textbox controls.
I've tried using the current row's FindControl method and specifying the name of the textbox field,I've tried using Request.Params method where I can tried passing the client id, as it seen in the View Source of the page such as this
Request.Params["grid1$gvData$ctl02$MMCODE"]
Still no luck, I've tried going up an down the Row's cells, controls collections, it seem to list the counts for rows correctly, the same goes for the amount of cells for each row, but at no point was I able to actually locate any controls such as textboxes or anything else and retrieve any values from them.
View 9 Replies
May 7, 2015
i can add the dynamic textbox in dynamically created html but can not get the value of dynamically added textbox.
there is code what i do
protected void txtNoOfTypes_TextChanged(object sender, EventArgs e)
{
int n = Convert.ToInt32(txtNoOfTypes.Text)+1;
for (int i = 0; i < n; i++)
{
Label MyLabel = new Label();
MyLabel.Text = "Type" + " " + ViewState["num"] + i + " " + ":" + " ";
[CODE]...
View 1 Replies
Feb 8, 2010
How can I maintain focus to a textbox which is placed inside a usercontroll while on postback.
View 6 Replies
May 7, 2010
I am loading tabs (using ajaxcontrol tookit) dynamically and populating UserControls and inside tabs.
Now, I have only the below code in aspx. How to maintain the tab focus?
<asp:ScriptManager ID="ScriptManager1" runat="server">
</asp:ScriptManager>
<asp:UpdatePanel ID="UpdatePanel1" runat="server" UpdateMode="Conditional">
</asp:UpdatePanel>
View 2 Replies
Jan 12, 2010
I am not able to figure out why it is not working. IS IT A BUG.
I want to focus textbox in 2nd tab on click but no luck with the following.
[URL]
i.e.
[code]....
View 4 Replies
Dec 21, 2010
I have two text boxes inside an update panel , what I am trying to do is when the text inside the first text box changes I want the focus to move to the second box, somehow this is not working for me I am pasint below the snap shot for the ASP code and the page behind code for it
<asp:UpdatePanel ID="UpdatePanelActivity" runat="server" UpdateMode="Conditional">
<ContentTemplate>
<asp:TextBox ID="txtActivity" runat="server" Font-Names="Code128bWin" OnTextChanged="ActivityEventHandler"
AutoPostBack="true"></asp:TextBox>
[Code].....
The textEmployee.focus does not set the focus to the textbox Employee.
View 2 Replies
