AJAX :: UpdatePanel And ListView Inside Another ListView - Work?
May 31, 2010
I have a ListView1 control that his <ItemTempleae> has a another ListView2. ListView2 is surrounded by <UpdatePanel> with trigger and also UpdateMode="Conditional". But, I don't know why ListView2 is not being update as it should, I need to refresh all the page to see the new data enter to ListView2 only. What is the problem? How can it be fixed? I think that the problem is something in the structure. There are about 10 ListView2 with updatepanel surronded them, so when I am looking to update a specific ListView2, it doesn't know which one to update because there are lots of them. What to do in order to solve that problem?
View 3 Replies
Similar Messages:
Aug 1, 2010
I have a page with a listview that shows something like posts. On each post there should be a "rate box" which works similar to the "Like" button in facebook. The rate box is a User Control, that has an update panel inside it.
If I put the control with some random values in the page it works great - but when I put it inside the ListView, where it should be located, it won't work. The method is being called, but nothing happens.
I simplified the code a bit to make it easier to understand:
[Code]....
While debugging I noticed the controls in the method "OnRateClick" are empty and don't contain the right values.
View 1 Replies
Dec 4, 2010
I have a CheckBox that is located inside a SelectItem Template. The CheckBox has Autopostback= true. Located outside the list view is a label. When the CheckBox is checked, I would like to trigger an the Updatepannel that includes the label. Instead I get an error message "'CheckBox1' could not be found for the trigger in UpdatePanel 'UpdatePanel3'. The code snippet is as follows:
Asp.net Markup:
[Code]......
View 5 Replies
Sep 30, 2010
I try to datbind a listview which is inside another listview InsertItemTemplate.
[Code]....
I'm binding the listivew in the parent listview onitemcreated events. I receive the error Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control.
View 4 Replies
Feb 17, 2011
How to handle the itemcommand event for the inner listview, here is my code:
[Code]....
View 2 Replies
Aug 3, 2010
I have a ListView control on a page that I need to support inline editing and inserting. Before I put it inside an update panel, everything was fine. As soon as I put it in an update panel, I seem to lose theOnItemUpdating, OnItemCanceling events. The OnItemEding event still fires, though.I am doing all updating, inserting manually.
View 4 Replies
Mar 22, 2011
I have a usercontrol with listview control nested inside an UpdatePanel and Panel. Below is the layout:UserControl :: Panel1 -> UpdatePanel -> Panel2 -> ListViewUpdateMode is set to conditional. Panel2's visibility is initially set to false.In the containing page, I load the usercontrol and bind the ListView, turn on the panel2 and call the update method of the updatepanel (since action is initiated by an external button and not a child of updatepanel) which displays the rows successfully. However, none of the edit, select or delete actions execute the intended way. When I click any of those buttons, I can see the
UpdateProgress fine but the events seem to be not firing at all. Execution hits the PageLoad but not into any of those event handlers likeItemEditing, SelectedIndexChanging etc.
View 1 Replies
Jun 15, 2010
I am looking for a good examples about JSON, how to do it.
I know JavaScript so it shouldn't be that hard.
Can JSON update server controls?
View 1 Replies
Jan 8, 2011
I have a web form for payments which consists of a DropDownList (credit card, purchase order, bill me). By default, credit card is selected, and the form (a ListView within a UpdatePanel) is loaded with the user's billing address. If the user changes the payment option, the form fields change -- for example, if purchase order is selected, the billing address + credit card fields disappear and a "Purchase Order Number" textbox appears. This is done using an AsyncPostBackTrigger associated with an event in the DropDownList.My problem is that when the form is submitted, I cannot see the user-entered values within the UpdatePanel/ListView, but I can see the original values loaded in the ListView before the edits were made. For example, if purchase order is selected, I can see the billing address from the ListView, but I cannot see the newly-entered Purchase Order Number from the ListView.Here's an abbreviated version of my code. I've bolded and commented two lines where the problem appears:
[Code]....
[Code]....
View 2 Replies
Mar 8, 2010
One thing I really don't like about Updatepanel is that I have to rebind almost all components in the page.
For example, I have to specify Eidit (Update) index (for inline editing) after rebind Listview using Update panel (after partial update).
It was too much job to rebind all components, so I redirected to same page and used Querystring to pass values in order to avoid all components to be updated based on one value...
If I update Listview using Updatepanel, the datapager has to be updated as well based on new Select SQL statement results.
Listview is pretty simple to update, using "Listview1.bind()" does the job.
Datapager is also in updatepanel, but it won't rebind with new results.
After post back, I'm still getting same Datapager as the orignal SQLDataSource.
In orger to "refresh" Datapager, what do I need to do??
I used to use iframe to do partial page update, but I'm having big problem using Updatepanel since simple rebind won't do the job.
View 5 Replies
Jan 26, 2010
Does anybody have a working example of a cascading dropdown inside the insertitem and edititem templates of a listview? I have been working on this for a couple of days now with only marginal success, and I fear I will have to abandon work on this due to time constraints.
The areas where I'm having difficulty are:
I just have two dropdowns(dds). In the insertitem row, I am able to have the user choose from dd1 and set a value in dd2. This works fine, but the user must be able to go back and change dd1 and have the proper value set as a selected default item in dd2. I can't get this to work.
In the edititem rows, I'm having difficulty setting the selected value of the dropdowns when displaying the row to be edited, and am running into the same problem as above when the user changes a dd1 value - the dd2 value does not reset to the proper selected default item.
My strategy for the edit items has been to try to get elements from the dataset bound to the listview to flow to the web service routines as contextkeys. I then iterate through the data values to be displayed in the dd and if the value = contextkey value, then set its isDefaultValue to true when adding it to the list of CascadingDropdownNameValue items.
The solution needs to work in the real world. That means Master Pages, so any fancy javascript workarounds need to take this into account.
View 2 Replies
Dec 9, 2010
Is it possible to have an update panel only inside the EditItemTemplate of a ListView? If so, how should it be placed?
View 1 Replies
Aug 15, 2010
I have a page that has a TabContainer to present and edit various pieces of information. On one of the tabs, there is a ListView control that allows in-place editing. The ListView works great when it is not contained in the tab. When it is in the tab, the Edit button works, but once it is in edit mode, none of the buttons will fire (update or cancel). Does anyone know of a conflict between the TabContainer and the ListView controls? I am thinking that I might try out jQuery UI to see if the tabs work any better.
View 1 Replies
Jul 27, 2010
i was wanting to display a list of comments in an update panel and use pagination ie 10 comments per page.
I was just wondering how achieve paging with a listview and datapager inside the update panel
View 2 Replies
Feb 26, 2010
I use a tabcontrol with 2 tabs. In the second tabpanel as seen in the code I use a Fileuploadcontrol to upload Images from a users computer.
The problem is that I need to surround the tabcontrol with an updatepanel as I dont want a fullpage postback when switching between these 2 tabpanels. In this code I have the tabcontrol inside an updatepanel but the problem is that the Fileupload controls does not seem to work inside an updatepanel.
How will I solve this problem as I dont want a fullpage postback when switching between the tabs ?
[Code]....
View 8 Replies
Feb 1, 2010
I hade a user control in my web application that I had inserted into an update panel.. after doing that the javascript of that control stoped working!
View 4 Replies
Jan 16, 2014
I have a ListView control that is inside of an update panel. I have a Button control that calls code behind when clicked and I have a trigger in the update panel that is triggered based on the click event of the button. The button that calls the code behind and inserts a record into the database works fine but I get a full page refresh and the ListView Data is not updated as expected. I then can go to another page, come back and the new data is there. I'm not sure what I missing. Please see the code below.
<asp:UpdatePanel ID="UpdatePanel1" runat="server" >
<ContentTemplate>
<asp:ListView ID="ListView2" runat="server" DataSourceID="sdsrcMessageComments" DataKeyNames="MessageId"
ItemPlaceholderID="PlaceHolder2" EnableViewState="False">
[code]....
View 1 Replies
Dec 10, 2010
I have problem to show method value on asp:Panel.
This is my *.aspx code :
[Code]....
Code Behind :
[Code]....
In this case, I can't show value myMethod at code behind to aspx file where this method is called.
If I use postBackTrigger in upControl updatePanel then the method(myMehod) will show on upShow updatePanel. But the updateProgress doesn't work.
View 3 Replies
Jan 26, 2011
Altough questions somehow similar to this have been asked for a number of times, but the question is still unsolved. Here is the question: I have a gridview which is contained in a tab container ajax control which itself is inside an updatepanel. Gridview works excellent and its corresponding methods are fired accurately, but when I enable paging, (e.g.) after I click on page 2, the gridview hides itself. here is my PageIndexChanging method:
protected void GridView1_PageIndexChanging(object sender, GridViewPageEventArgs e)
{
GridView1.PageIndex = e.NewPageIndex;
GridView1.DataBind();
UpdatePanel2.Update();
}
Why paging causes gridview to stop working correctly? What can I do?
View 2 Replies
Nov 29, 2010
I have this working except for one thing. After the user has voted I want to replace the submit with "Thank you" text.
In the aspx page I have a label that is not visible, with the text = "NotVoted". This label is not in the listview. In the listview I have a label that is not visible and a button that is. The rating control is called vidRating. In the vidRating_Changed event I have
lblVoteStatus.Text = "Voted"
ListView1.DataBind()
In the ListView1_ItemDataBound event I have
Dim lblVoted As Label = CType(e.Item.FindControl("lblVoted"), Label)
Dim btnSubmit As Button = CType(e.Item.FindControl("btnSubmit"), Button)
If lblVoteStatus.Text = "Voted" Then
btnSubmit.Text = "Thank you"
btnSubmit.Visible = False
lblVoted.Visible = True
End If
When I run this in debug mode, if the user has voted, ListView1.DataBind() is run, lblVoteStatus.text = "Voted", and the code in the IF statement is run. I get no errors, but the page doesn't change. I still see the button and I don't see the label text. If I comment out the if /end if statements, the page opens displaying the label text, not the submit button. So the controls are being found ok. What am I doing wrong? How can I disable or remove the submit button after the user votes?
View 4 Replies
Jan 16, 2010
I have the following (abbreviated) code:
<asp:FormView ID="FormView1" runat="server" DataKeyNames="ItemID" DataSourceID="LinqDataSource1">
<EditItemTemplate>
<asp:DropDownList ID="ddlCategory" runat="server" SelectedValue='<%# Eval("Category") %>'
DataSource="<%# GetCategories() %>" DataTextField="Text" DataValueField="Value" />
</EditItemTemplate>
<ItemTemplate>
<asp:ListView ID="lvParticipants" runat="server" DataSource='<%# Eval("Participants") %>' >
<InsertItemTemplate>
<asp:DropDownList ID="ddlCountry" runat="server" SelectedValue='<%# Eval("Country") %>'
DataSource="<%# GetCountries() %>" DataTextField="Text" DataValueField="Value" />
</InsertItemTemplate>
</asp:ListView>
<ItemTemplate>
</asp:FormView>
When the FormView is in Edit mode, ddlCategory is populated as expected by calling GetCategories(), which returns a List of categories. However, when the ListView is in Insert mode, ddlCountry is empty. I put a break point in GetCountries(), but it never gets called. If I change the name of the method, I get an error. So it recognizes the method at compile time, but does not call it at run time. I'm guessing this is an embedded binding issue of some kind, but I'm hoping someone can save me a lot of time by pointing out the solution.
View 11 Replies
Jan 25, 2010
I am loading the autocomplete extender properly but I need the PK from the selectedValue. I have looked at other examples and they do NOT show how to drill into the tabcontainer, then drill into the listview, and then locate the extender value. Here is what I have so far. My "TABCONTAINER" value shows the extender correctly but I am unable to locate it.
[Code]....
View 2 Replies
Feb 16, 2014
I need the ability to check a box and then store or remove the text of the checkbox clicked to my sql server database. see my code below that is written in vb.
 <%@ Page Language="vb" AutoEventWireup="false" CodeBehind="SBN_Company_Cat_Types.aspx.vb" Inherits="ShopBuyName_Test_Site.SBN_Company_Cat_Types" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
[Code].....
View 1 Replies
Sep 18, 2010
I'm trying to change the visibility of a imagebutton to false, if the imagebutton.ImageUrl="". The problem is that the imagebutton is inside "ListView2", and "ListView2" is inside "ListView1". Who can I do this in vb code... or even a javascript.
View 4 Replies
Jun 22, 2010
I have a listview that is showing its result by using a linq query. The linq query goes like this.
[Code]....
* db.Varer: Varer is a table that contains basic product information like proudct name, product nr. etc. ** a.fk_kategori_id == CatParamId : I'm just saying limit the result according to the Category ID (a.fk_kategori_id). The category id is coming from a dropdownlist (CatParamID) *** Join: Besides the Varer (Product) table I also have another table, Sizes. This Sizes table contains 6 columns (ID_Sizes (int) primary key and the columns: OneSize, S, M, L, XL, XXL all are bit (true or false)). There is a relationship between Varer table and Sizes table. It says that I can only insert a value into the "fk_sizes_id - column" of varer table if that value already exists as primary key within the Sizes table. **** I'm starting by picking basic product values like productId, ProductName etc from the Varer (a) table ***** Then I'm picking the corresponding Sizes values (onesize, s, m, ...) from the Sizes table. Now within my ListView I'm showing the above result by using Eval, like this.
[Code]....
And this works perfectly, but now comes the thing that is causing me trouble. I have the below drop down list (still within the ListView ItemTemplate):
[Code]....
I want this drop down list to be populated with only those of the "linq query's Sizes table result" that are true. By "Sizes table result" I mean these
[Code]....
View 14 Replies
