Dim iCounter as Integer Dim iQuantity as Integer = 10 Protected Sub btnFoo_Click Handles btnFoo Yadda For i as Integer = iCounter to iQuantity - 1 //do something with AsyncPostBackTrigger until iCounter = iQuantity - 1 //then trigger a full postback Next End Sub
I am new to the concept and feel like there must be something really easy that I am missing.
I have a simple table with 5 text boxes, above that i have a dropdown where you make a selection, if there are any records of associated with the selection, then i display in the fields..
A while back this was working, you could make a selection and the fields were within a update panel and they were populated. But im revisiting the pages to make some updates and changes and noticing that the page no longer populates the fields when a selection is made..
Is there anyway to debug the updatepanel? I put a breakpoint in my selectedindexchanged event and my Db call is returning values and the textboxes .TEXT values are being assigned the right values in the code behind, but the fields never show up..
This page hasnt been touched since it was wworking last, so need to see how i can test / debug the update panel to determine what coudl be causing it..
I have a textbox txtPctDown inside an update panel. On textchanged, a sub is called that does a calculation and puts the result in to a label in a modal dialog. When the text changes, the sub is reached but the modal dialog doesn't appear. if I eliminate the UpdatePanel then everything works fine. I tried with an without using the textchanged as a trigger.
How do I get the modal dialog to appear when the text changes?
I have an ASPX page with several update panels. They all have their UpdateMode="Conditional".
Some panels are refreshed when the user clicks a button and other are refreshed regularly, with a timer.
The panel refreshed with a timer launches a database query and many validations on the data. Then display the result in a panel when errors have been found.
That all works fine except when the validation has to delete files on the disk. (.txt, .jpg, etc it depends). In that case, after the validation is made, I am always kicked out of my website because of the error (Thread was being aborted). So I loose all my session variables which means I am not logged off.
Anybody had that kind of problem ? Is it normal that deleting files AND directories on the server make me loose my session? Is there a way to prevent that ?
I have following code and when I select from my drop down list the progress controls do not show and my grdiview is not being filled either. If I leave out the update panel from my code things are working fine.
I have a user control with linkbuttons (used for paging) and a repeater inside an update panel. The paging works correctly, but is causing a full page postback every time I click through to the next page.
The update panel looks like this:
So far, I have tried adding an async postback trigger for the user control, which does cause an async postback but does not update the rest of the text in the update panel. In otherwords, the async postback occurs and the next page shows up, but the original text in the repeater is there as well just below it.
I have also confirmed that I have IDS set on my linkbuttons, since that can trigger a full postback inside an update panel.
I have tried changing the update panel mode (Always, Conditional, ChildrenAsTriggers, etc.).
None of it makes a difference - the only thing that actually causes an async postback is to use the trigger, but then the rest of the content in the update panel is not updated, so I get duplicate content.
I am trying to create a simple web application that uses a barcode scanner to read the barcode and then insert the information into a database. I have been able to get the barcode scanner to read the barcode and place the information into a textbox.
The problem that I am having is that I can get it to post back 26 times then it will go to error (with no information). If I then add additional controls to the page I can only get it to post back 10 times. Below is my code... I have been pulling my hair out for the last two days.
I have a user control, that has an update panel and update progress control in it.
I use this user control in more than 1 location on the same page.... problem is, when ucA posts back, I see the update progress control for both ucA and ucB. I assume this is because it is a user control and the update panel and progress are named the same?
Either way - how do I make it so that the update progress only displays for the proper user control?
I've exempted the irrelevant bits of code. Essentially, I am trying to change the URL of an image control inside of an update panel inside of a custom user control from a function called inside an update panel from my main page. Using UpdatePanel.Update() isn't working: I end up waiting for the next full page POST to occur before all the updates I make to CustomControl from buttons within the main page's update panel are visible. I verified that Update() was being called via the debugger: there are no issues in that department.
Here, you can see Custom Control and the Button declared. The button is in an update panel to avoid giving a full POST and causing the whole page to reload.
This control stores images within their own seperate update panels because rerendering the images is very slow (it requires processing arrays of millions of datapoints) and the user only ever needs to modify one image at a time. I'm using Image1 as an example.
I have many controls like dropdown, radiobuttonlist, etc on my page and I put all these controls inside the update panel so that the page doesn't look to be posting back when something is selected. Now the working on the page is very smooth. But the session object isn't getting refreshed even if I postback to the server and as a result even if the users are working on the page they are being sent to the login screen after 20 mins.
Is there anyway where I could put all the controls in update panel and still refresh the session after any postback(dropdown selection)
I have 2 user controls. The first user control generates custom paging and assigns the output as a string literal. The second user control is a simple repeater which uses values from the paging control via a query string to decide which relevant chunk of data to retrn.
The custom paging control is embeded in the custom reapeater control. In my my page, I simply call the customer erpeater control and everything works treat.I now want to add update panels to this but I can't think where to start.
I have block of code that consists of a textbox a button and a dropdown. The text entered in the text box filters the dropdownlist when the user clicks the button. The Ajax works great when it is in a simple page but if I put the same code in a User control I get flicker.
I'm having a bit of an issue in my ASP.Net application moving focus from a textbox in one user control to a text box in the next user control on the page after postback. I've searched high and low over the last several days to find a solution but, for whatever reason, have been unable to do so.
I have a page that has user controls loaded dynamically to allow a user to enter data.The number and type of user controls loaded to the page is determined at run time based on a database query.It is possible than many controls of the same type can be loaded. Each user control has its own update panel. Within the update panel of each control is a regular asp panel. Inside of the regular panel there are at least 2 server controls (any other controls that may exist in the user control are not affected by this issue) - a text box and a button.The defaultbutton property of the regular panel is set to the ID of the button within the user control. The desired behavior is to allow the user to enter data into the textbox on one user control hit enter to save the data on that user control the application will set focus to the textbox of the next user control on the page after the data from the "current" user control has been saved. Other considerations;
The application uses master pages. We make extensive use of ajax and the ajaxtoolkit in the application. I am using Visual Studio 2010 and .Net 4 The issue - when first entering the page, one can enter data into the first textbox and press the enter key. Data from "current" user control is correctly saved and focus is correctly moved to the next user control on the page.
Data can be entered into the textbox of "new" user control and when the enter key is pressed, the data is correctly save. The focus appears to move correctly to the next user control on the page.Data cannot be entered into the textbox of the control. Pressing the enter key will not save the data (because none was entered) but the focus will move to the textbox of the next user control on the page.
Data can be entered into the textbox of the user control. When the enter key is pressed, the data is correctly saved and the focus appears to move correctly to the textbox of the next control on the pageBasically, steps 3 and 4 are repeated until the end of the user controls on the page, alternating between being able to enter data and not. Other items of note When one is able to enter data into the textbox of a user control, one can correctly tab through the textboxes of each user control until the end of the page When one is not able to enter data into the textbox of a user control, pressing the tab key will take the focus to the address bar of the browser.
I created a much simplified example of the scenario described above and was able to consistently reproduce the "bad" focus behavior. All of the ajax toolkit controls and code where stripped out of the sample to rule the toolkit out as a cause. The behavior still occurs without the toolkit.
I am including the code for default.aspx and WebUserControl1.ascx.
When an asynchronous postback happened inside update panel, another postback happens also for MasterPagenot only update panel embedded page .I want to prevent this MasterPage postback . is this possible ?think like i have a MasterPage and another page which is test.aspx which is content page of MasterPagei have update panel at test.aspxwhen asynchronous postback happens at this test.aspx update panel it also loads MasterPage Page_Loadi want to prevent this (it should not also load MasterPage Page_Load)
I am hosting a Windows User Control in my web page using <object> tag. Everything works fine when the control is outside the updatepanel and is independent of other web controls but when I move the control inside the update panel, it doen't load the user control properly.
why it doesn't render the control properly and what can I do to fix it?
I tried moving the user control outside the update panel but since this user control is shown/hidden dynamically and is rendered based on other web controls which are inside an Update Panel, the user control is not shown at all.
when postback occurs due to update panel's child control then in page load event how can i know that it was dut to update panel ?i.e., i want to differentiate between general postback and postback due to update panel's child control in page load event .How is that possible ?
Related to my previous question which is answered. The deal is, there is an update panel for modalpopup extender that is triggered by a button. The problem is when the form is submitted by a button, this modal popup is seen on the page! I do NOT want this modal popup extender to be seen when the form is submitted.
I have a page on which there is a textbox that is in update panel and has text changed event and autopostback=true. On the same page there is a 'Retrieve' button(inside repeater control) outside the updatepanel. Now what is happening is if user inputs data in the textbox and clicks retreive button page_load event is firing twice which is not what should be happening, one time its the partial postback due to the text changed event and second time is the page post back. I would like to restrict the second postback.