I followed the instructions to setup the Ajax Control Toolkit.
After that I just create a TabContainer and I'm getting this error when I try to run my website application :
Server Error in '/WebSite3' Application.
I am getting below error while running my application
Exception in MS Oracle DAAB Method - GetDataSet : Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "DABResource.resources" was correctly embedded or linked into assembly "DBServices" at compile time, or that all the satellite assemblies required are loadable and fully signed.
Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Exception: Exception in MS Oracle DAAB Method - GetDataSet : Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "DABResource.resources" was correctly embedded or linked into assembly "DBServices" at compile time, or that all the satellite assemblies required are loadable and fully signed.
Source Error: [Code]....
I am Having DBServices .dll which is registered in my assembley
Recently i installed VS 2008 in my system.this application is working fine in VS 2005 priviously.Now i am getting above error while running this application in VS2005
I want to add a calendar extender to my website so I downloaded the lastest Ajax Control Toolkit, added the calendar and when I start debugging I get this exception: Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "AjaxControlToolkit.Properties.Resources.NET4.resources" was correctly embedded or linked into assembly "AjaxControlToolkit" at compile time, or that all the satellite assemblies required are loadable and fully signed. I have the dlls in the bin folder... I followed all the steps in the instruction guide for installing the ajax control toolkit.
View 1 RepliesServer Error in '/' Application.
Could not find any resources appropriate for the specified culture or the neutral culture. Make sure
"AjaxControlToolkit.Properties.Resources.resources" was correctly embedded or linked into assembly "AjaxControlToolkit" at compile time, or that all the satellite assemblies required are loadable and fully signed.
Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Resources.MissingManifestResourceException: Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "AjaxControlToolkit.Properties.Resources.resources" was correctly embedded or linked into assembly "AjaxControlToolkit" at compile time, or that all the satellite assemblies required are loadable and fully signed.
Source Error:
[Code]....
Stack Trace:
[Code]....
Version Information: Microsoft .NET Framework Version:2.0.50727.3607; ASP.NET Version:2.0.50727.3614
i am new to using AJAX.I am using Visual Web Developer 2010 and I followed all the steps given on the http://www.asp.net/ajaxlibrary/act.ashx website to install AJAX.However, when I try to run my website,I get an error:
"Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "AjaxControlToolkit.Properties.Resources.resources" was correctly embedded or linked into assembly "AjaxControlToolkit" at compile time, or that all the satellite assemblies required are loadable and fully signed."
I have a scenario where I am using CalendarExtender on a page with UICulture and Culture as "en-US".
But I want to show CalendarExtender in "de-DE" culture. I know that I can set up EnableScriptGlobalization="True" EnableScriptLocalization="true" for ScriptManager and CalendarExtender will show up as per culture defined for page. But this does not work for me because I can not change page level UICulture and Culture from "en-US" to "de-DE" ( If I do so, I face double value issue. e.g. double d = 12.34; is displayed as 12,34 on UI and then its unmanagable while editing values).
So coming back to my problem, Can I just change culture for CalendarExtender so that page culture is set to "en-US" and calender is shown in some different language? I know its not something straightforward, I might need to dig up source code.
I develop an ASP.NET 2.0 with VS 2008, VB.NET, and sometime a get this exception when web application is launching.
Message Parser Error: Could not load file or assembly 'AjaxControlToolkit, Version = 3.5.40412.0, Culture = neutral, PublicKeyToken = 28f01b0e84b6d53e' or one of its dependencies.The definition from the assembly manifest does not match the assembly reference. (Exception from HRESULT: 0x80131040)
To solve this problem, I need to regenerate the project. I would like to understand why this error append sometime. I try to check the version referenced in project property, try to check the version attribute on Web.Config :
<pages theme="Formulaires" validateRequest="false" styleSheetTheme="Formulaires" enableEventValidation="false" enableViewStateMac="false">
<controls>
<add tagPrefix="ajaxToolkit" namespace="AjaxControlToolkit" assembly="AjaxControlToolkit, Version=3.5.40412.0, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e" />
<add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
</controls>
<namespaces>
<clear/>
<add namespace="System"/>
<add namespace="System.Collections"/>
<add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/>
<add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/>
<add namespace="System.Web"/>
<add namespace="System.Web.Caching"/>
<add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/>
<add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/>
<add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/>
<add namespace="System.Web.UI.HtmlControls"/>
</namespaces>
</pages>
It the correct version... i don't understand about this problem.
I have a .net web application hosted in Sharepoint 2007. Recently I added a page to launch an application(.exe) from the code behind of a .aspx page. The applicatoin is launched when I test it on my desktop(without Sharepoint). When I deploy the .aspx page and the dll to the Sharpoint, I get an error "Could not load file or assembly 'CheckService, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
View 1 RepliesI'm working on my ASP Application 2.0 framework with AJAX Extension 1.0 installed on my pc. I'm getting an error on my CrystalReportViewer:Could not load file or assembly 'System.Web.Extensions, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)" I already tried some solutions I found in google but it's still im getting the error.:
[URL]Below are the codes for my web.config
[Code]....
Here's my code in the webform
[Code]....
I'm working on a project that accesses the Exchange Server. Before I replaced the project to a server, everything went fine. But now I'm getting this error.
View 2 RepliesI've been using a particular version of a PDF library (PdfSharp), with the dll file in the bin directory (bin/PdfSharp.dll). I use this to prepare, combine, split, and otherwise manipulate PDF files, both those that come from outside my app and those I generate using ReportViewer.
Today I saw there was a new version of the library and naively dropped the new .dll into the bin folder, replacing the old one (I rarely have need to mess with the 2 or 3 dlls in my bin folder and it's been 2 years since I set them up so I wasn't really sure how to proceed and didn't take the time to think too much about it). The PDF generation no longer worked, so I deleted the newer .dll and replaced it with the older one (I have copies in backups, the production server, etc).
Now, although I've confirmed that the dll in the bin folder is the older version (file Properties show correct older version number, file size is older file size, etc), and although the application works correctly, including those parts that call on the library, I can no longer access the data sources for my RDLC files -- when I open an RDLC file in the editor and choose Report->Data Sources, I get this error:
Could not load file or assembly 'PdfSharp, Version=1.2.1269.0, Culture=neutral, PublicKeyToken=f94615aa0424f9eb' or one of its dependencies. The system cannot find the file specified.
I am mystified: I don't understand the connection between a report's data source and this library; I know that the correct version (1.2.1269.0) is in binPdfSharp.dll; and I can find no references to any version of PdfSharp in any file in my application, other than the code that actually calls it (ie, there are no references to it in web.config or the .rdlc files or the dataset .xsd files). I've also been through the registry and find no references to the new version. I've tried deleting the dll and re-adding it using "Add Reference...", and I've tried "Update Reference", all to no avail.
I need to change culture of the specific aspx page bases on the main user's culture.I am able to fetch the data that which culture main user have.But some how I am not able to set the same culture for that aspx page.I had written the below code for that.
[Code]....
But that is not working it sets the default culture of the browser.
how can to get culture info or just culture name from the datetime string e.g i have strings like: "16/02/2008" or "23/02/2008 " can i know the culture name from the above datetime strings?
View 3 RepliesI would like to know the performance impact of using the culture invariant resources instead of culture specific ones.
For example, we plan to deploy a website and not have any en-US resources. This is because our culture invariant resources are always identical to the en-US resources.
I created a custom clander server control basing on "System.Web.UI.WebControls.Calandar" and when i change the culture from login Screen (Ex:- Spanish) i am setting only the UI Culture in the page base class. When i had the Both "CurrentUICulture" and "CurrentCulture" set i could see the Day (Mon Tue) of the my custcalander control in the corresponding culture, but when i commented out i see them in English only (not in the corresponding culture set while loggin in. The reason why i commented out the "CurrentCulture" was that when i set this the middle tier or code behind files also running in this culture (as we are setting on the CurrentThread culture) and causing decimal data coming in this culture (Ex:- spain) and so on. So i only set the "CurrentThread.CurrentUICulture" only to corresponding culture and not the "Thread.CurrentThread.CurrentCulture". Is there a way to acheive this, i mean How to make the Day (Ex:- Mon, Tue, Wed) in the corresponding culture with out setting "Thread.CurrentThread.CurrentCulture"?
/// <summary>
/// Current selected culture
/// </summary> [code]....
I have a pesky problem: if I change the UI culture dynamically and then I reload a page, the Resources.resx file selected was changed into the page but not into the Update Panel.
View 1 RepliesI can't have my culture on CalendarExtender ? I've tryed to set Culture and UICulture to auto on the container page, but calendar still in US ?this CalendarExtender is on an Usercontrol.
View 2 RepliesI am getting this message on my Page element. However my project references C:Program FilesMicrosoft ASP.NETASP.NET MVC 2AssembliesSystem.Web.Mvc.dllwhich is Version 2.0.0.0Furthermore my Web.config contains
<assemblies>
<add assembly="System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
This is VS2010.I created the blank project with VS2010 and then copied the code (without Web.config) from the old project.
to programmatically assign the culture "es-ES" to ajax calendar control.calendar control name is: CalOrderdate.
View 1 RepliesI have a strange problem with ASP.NET. Several sites on my web server run the exact same application. The application has a page that contains a Tab Container from the Ajax Control Toolkit which in itself contains a Calendar control.
If I set my culture in the web.config to be:
<globalization culture="en-GB" uiCulture="en-GB" />
Then everything works fine. However, by changing this to:
<globalization culture="en-US" uiCulture="en-US" />
When attempting to load the page I get an out of memory exception and w3wp.exe seems to use all available memory.
URL...I need to select a proper SQL procedure based on a current culture selected by a user and I need to select it inside the web service.Example:
Using cmd As New SqlCommand()
cmd.CommandText = "dbo.Search_ItemsInFullText_" & Thread.CurrentThread.CurrentCulture.TwoLetterISOLanguageName
cmd.CommandType = Data.CommandType.StoredProcedure
cmd.Parameters.AddWithValue("@SearchText", prefix)
cmd.Connection = conn
conn.Open()
but this does not work.How can I detect a current culture in a web service?
I am using ajax calendar extender control, i use the following two culture
en-US and es-ES,whenever i use es-ES then it should localize the whole calendar to present teh dayas and months name and also any labels on it in spanish style names, rather than english.
how can i pass culture directly to teh calendar programmatically.OrderDate is my calendar name.
[Code]....
The following setup seems to work fine on the client side, however when I post back and check Page.IsValid, the value is false. I also looked at mevDate.IsValid and it's false. It seems that setting the CultulreName on the MaskedEditExtender is sufficient to get the MaskedEditValidator to emit the correct JavaScript, but on the server side of things it doesn't work. When I flip CultureName to "en-US" everything works as expected.
If I set Thread Culture and UICulture for one ASPX, after pass for that page, all my aspx that use the same thread(not same request) will have the same Culture?
Because I need to set Culture just for one ASMX
I want to set culture info for my full application. where're i say datetime.now, it should give datetime based on my cultureinfo i set. how do i do it?
View 6 Replies