Databases :: Getting Error While running Application /Could Not Find Any Resources Appropriate For The Specified Culture Or The Neutral Culture
Sep 17, 2010
I am getting below error while running my application
Exception in MS Oracle DAAB Method - GetDataSet : Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "DABResource.resources" was correctly embedded or linked into assembly "DBServices" at compile time, or that all the satellite assemblies required are loadable and fully signed.
Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Exception: Exception in MS Oracle DAAB Method - GetDataSet : Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "DABResource.resources" was correctly embedded or linked into assembly "DBServices" at compile time, or that all the satellite assemblies required are loadable and fully signed.
Source Error: [Code]....
I am Having DBServices .dll which is registered in my assembley
Recently i installed VS 2008 in my system.this application is working fine in VS 2005 priviously.Now i am getting above error while running this application in VS2005
View 4 Replies
Similar Messages:
Jan 27, 2010
I followed the instructions to setup the Ajax Control Toolkit.
After that I just create a TabContainer and I'm getting this error when I try to run my website application :
Server Error in '/WebSite3' Application.
View 3 Replies
Feb 25, 2011
I want to add a calendar extender to my website so I downloaded the lastest Ajax Control Toolkit, added the calendar and when I start debugging I get this exception: Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "AjaxControlToolkit.Properties.Resources.NET4.resources" was correctly embedded or linked into assembly "AjaxControlToolkit" at compile time, or that all the satellite assemblies required are loadable and fully signed. I have the dlls in the bin folder... I followed all the steps in the instruction guide for installing the ajax control toolkit.
View 1 Replies
Jul 22, 2010
Server Error in '/' Application.
Could not find any resources appropriate for the specified culture or the neutral culture. Make sure
"AjaxControlToolkit.Properties.Resources.resources" was correctly embedded or linked into assembly "AjaxControlToolkit" at compile time, or that all the satellite assemblies required are loadable and fully signed.
Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Resources.MissingManifestResourceException: Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "AjaxControlToolkit.Properties.Resources.resources" was correctly embedded or linked into assembly "AjaxControlToolkit" at compile time, or that all the satellite assemblies required are loadable and fully signed.
Source Error:
[Code]....
Stack Trace:
[Code]....
Version Information: Microsoft .NET Framework Version:2.0.50727.3607; ASP.NET Version:2.0.50727.3614
View 1 Replies
Jun 4, 2010
i am new to using AJAX.I am using Visual Web Developer 2010 and I followed all the steps given on the http://www.asp.net/ajaxlibrary/act.ashx website to install AJAX.However, when I try to run my website,I get an error:
"Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "AjaxControlToolkit.Properties.Resources.resources" was correctly embedded or linked into assembly "AjaxControlToolkit" at compile time, or that all the satellite assemblies required are loadable and fully signed."
View 1 Replies
Dec 21, 2010
I have a .net web application hosted in Sharepoint 2007. Recently I added a page to launch an application(.exe) from the code behind of a .aspx page. The applicatoin is launched when I test it on my desktop(without Sharepoint). When I deploy the .aspx page and the dll to the Sharpoint, I get an error "Could not load file or assembly 'CheckService, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
View 1 Replies
May 29, 2010
I'm working on my ASP Application 2.0 framework with AJAX Extension 1.0 installed on my pc. I'm getting an error on my CrystalReportViewer:Could not load file or assembly 'System.Web.Extensions, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)" I already tried some solutions I found in google but it's still im getting the error.:
[URL]Below are the codes for my web.config
[Code]....
Here's my code in the webform
[Code]....
View 2 Replies
Mar 2, 2011
I'm working on a project that accesses the Exchange Server. Before I replaced the project to a server, everything went fine. But now I'm getting this error.
View 2 Replies
Jul 19, 2010
I've been using a particular version of a PDF library (PdfSharp), with the dll file in the bin directory (bin/PdfSharp.dll). I use this to prepare, combine, split, and otherwise manipulate PDF files, both those that come from outside my app and those I generate using ReportViewer.
Today I saw there was a new version of the library and naively dropped the new .dll into the bin folder, replacing the old one (I rarely have need to mess with the 2 or 3 dlls in my bin folder and it's been 2 years since I set them up so I wasn't really sure how to proceed and didn't take the time to think too much about it). The PDF generation no longer worked, so I deleted the newer .dll and replaced it with the older one (I have copies in backups, the production server, etc).
Now, although I've confirmed that the dll in the bin folder is the older version (file Properties show correct older version number, file size is older file size, etc), and although the application works correctly, including those parts that call on the library, I can no longer access the data sources for my RDLC files -- when I open an RDLC file in the editor and choose Report->Data Sources, I get this error:
Could not load file or assembly 'PdfSharp, Version=1.2.1269.0, Culture=neutral, PublicKeyToken=f94615aa0424f9eb' or one of its dependencies. The system cannot find the file specified.
I am mystified: I don't understand the connection between a report's data source and this library; I know that the correct version (1.2.1269.0) is in binPdfSharp.dll; and I can find no references to any version of PdfSharp in any file in my application, other than the code that actually calls it (ie, there are no references to it in web.config or the .rdlc files or the dataset .xsd files). I've also been through the registry and find no references to the new version. I've tried deleting the dll and re-adding it using "Add Reference...", and I've tried "Update Reference", all to no avail.
View 1 Replies
Nov 23, 2010
I need to change culture of the specific aspx page bases on the main user's culture.I am able to fetch the data that which culture main user have.But some how I am not able to set the same culture for that aspx page.I had written the below code for that.
[Code]....
But that is not working it sets the default culture of the browser.
View 1 Replies
Apr 7, 2010
how can to get culture info or just culture name from the datetime string e.g i have strings like: "16/02/2008" or "23/02/2008 " can i know the culture name from the above datetime strings?
View 3 Replies
Mar 1, 2010
I have a scenario where I am using CalendarExtender on a page with UICulture and Culture as "en-US".
But I want to show CalendarExtender in "de-DE" culture. I know that I can set up EnableScriptGlobalization="True" EnableScriptLocalization="true" for ScriptManager and CalendarExtender will show up as per culture defined for page. But this does not work for me because I can not change page level UICulture and Culture from "en-US" to "de-DE" ( If I do so, I face double value issue. e.g. double d = 12.34; is displayed as 12,34 on UI and then its unmanagable while editing values).
So coming back to my problem, Can I just change culture for CalendarExtender so that page culture is set to "en-US" and calender is shown in some different language? I know its not something straightforward, I might need to dig up source code.
View 7 Replies
Apr 19, 2010
I would like to know the performance impact of using the culture invariant resources instead of culture specific ones.
For example, we plan to deploy a website and not have any en-US resources. This is because our culture invariant resources are always identical to the en-US resources.
View 1 Replies
Jul 2, 2010
I develop an ASP.NET 2.0 with VS 2008, VB.NET, and sometime a get this exception when web application is launching.
Message Parser Error: Could not load file or assembly 'AjaxControlToolkit, Version = 3.5.40412.0, Culture = neutral, PublicKeyToken = 28f01b0e84b6d53e' or one of its dependencies.The definition from the assembly manifest does not match the assembly reference. (Exception from HRESULT: 0x80131040)
To solve this problem, I need to regenerate the project. I would like to understand why this error append sometime. I try to check the version referenced in project property, try to check the version attribute on Web.Config :
<pages theme="Formulaires" validateRequest="false" styleSheetTheme="Formulaires" enableEventValidation="false" enableViewStateMac="false">
<controls>
<add tagPrefix="ajaxToolkit" namespace="AjaxControlToolkit" assembly="AjaxControlToolkit, Version=3.5.40412.0, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e" />
<add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
</controls>
<namespaces>
<clear/>
<add namespace="System"/>
<add namespace="System.Collections"/>
<add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/>
<add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/>
<add namespace="System.Web"/>
<add namespace="System.Web.Caching"/>
<add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/>
<add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/>
<add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/>
<add namespace="System.Web.UI.HtmlControls"/>
</namespaces>
</pages>
It the correct version... i don't understand about this problem.
View 2 Replies
Jun 1, 2010
I created a custom clander server control basing on "System.Web.UI.WebControls.Calandar" and when i change the culture from login Screen (Ex:- Spanish) i am setting only the UI Culture in the page base class. When i had the Both "CurrentUICulture" and "CurrentCulture" set i could see the Day (Mon Tue) of the my custcalander control in the corresponding culture, but when i commented out i see them in English only (not in the corresponding culture set while loggin in. The reason why i commented out the "CurrentCulture" was that when i set this the middle tier or code behind files also running in this culture (as we are setting on the CurrentThread culture) and causing decimal data coming in this culture (Ex:- spain) and so on. So i only set the "CurrentThread.CurrentUICulture" only to corresponding culture and not the "Thread.CurrentThread.CurrentCulture". Is there a way to acheive this, i mean How to make the Day (Ex:- Mon, Tue, Wed) in the corresponding culture with out setting "Thread.CurrentThread.CurrentCulture"?
/// <summary>
/// Current selected culture
/// </summary> [code]....
View 3 Replies
Apr 1, 2011
I have a pesky problem: if I change the UI culture dynamically and then I reload a page, the Resources.resx file selected was changed into the page but not into the Update Panel.
View 1 Replies
Jan 13, 2010
I am getting this message on my Page element. However my project references C:Program FilesMicrosoft ASP.NETASP.NET MVC 2AssembliesSystem.Web.Mvc.dllwhich is Version 2.0.0.0Furthermore my Web.config contains
<assemblies>
<add assembly="System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
This is VS2010.I created the blank project with VS2010 and then copied the code (without Web.config) from the old project.
View 5 Replies
Sep 21, 2010
If I set Thread Culture and UICulture for one ASPX, after pass for that page, all my aspx that use the same thread(not same request) will have the same Culture?
Because I need to set Culture just for one ASMX
View 2 Replies
Jul 13, 2010
I want to set culture info for my full application. where're i say datetime.now, it should give datetime based on my cultureinfo i set. how do i do it?
View 6 Replies
Feb 18, 2010
i want to parse a datetime from one culture to another but i am getting exception "String was not recognized as a valid DateTime". I have already tried the follwoing code:
DateTime creationTime = DateTime.Parse("16/02/2010 12:37:27", CultureInfo.CreateSpecificCulture("en-US"));
DateTime creationTime = DateTime.Parse("16/02/2010 12:37:27", CultureInfo.CreateSpecificCulture(CultureInfo.CurrentCulture.Name));
DateTime creationTime = DateTime.Parse("16/02/2010 12:37:27", CultureInfo.InvariantCulture);
My current culture is united states i am getting the date sting in UK format then plz any idea how can i convert it without hard coding like this: DateTime creationTime = DateTime.Parse("16/02/2010 12:37:27", CultureInfo.CreateSpecificCulture("en-GB"));
View 4 Replies
Mar 25, 2010
Is it possible to set TextBox's culture to other then en-EN? If yes then how? I need to be able to allow users to type japanese in textboxes.
View 9 Replies
Feb 5, 2010
I have a website calling a WCF service and I want the service to run with the browser culture. I am using the service in ASP.NET compatibility mode. This is working so far - It is possible to set the culture of the WCF service using the culture and uiCulture of the globalization section.
My problem is that enableClientBasedCulture shows no effect. These are my globalization settings for the service:
<globalization enableClientBasedCulture="true" culture="auto" uiCulture="auto"/>
The service ignores these settings and uses the default culture.
Something I am missing? Is enableClientBasedCulture the wrong way to transfer the culture in this scenario?
View 1 Replies
Nov 15, 2010
I'm sending parameters to paypal as hidden form vars.but my site's culture is Danish.
So "50,00" is the value for "amount_1"
<input type="hidden" name="amount_1" value="50,00" />
I'm using this code that converts the 50 to "50,00"
item.PricePaid.ToString("#.00")
I believe the number should be like: "1234.56" Is there a way to set the culture to en-US just on this process?
View 1 Replies
Mar 31, 2011
I'm having a problem when I deploy my web application in different servers. There seems to be an inconsistency in some DateTimeFormat patterns, like ShortDatePattern, using the same culture (pt-BR).
In my development machine (Windows 7, .NET 4 installed, application targeting .NET 3.5) and a Windows Server 2008 R2 (with the application targeting .NET 4) server the ShortDatePattern is "dd/MM/yyyy" - which is the correct, I guess.
In the production server (Windows Server 2003, using .NET 3.5) it is "d/M/yyyy". It is causing me tons of trouble.
I could solve the issue by setting the patterns by hand, but I'd really like to avoid doing this every time I need to output a date. Specially since this will be non-trivial in many places (like where I use MVC's Html.TextBoxFor) and will require a good amount of rewriting.
If there's a way of changing the patterns for the entire web application in one place it would be great. I've tried the following approach in the Global.asax.cs file, with no success:
CultureInfo info = new CultureInfo(System.Threading.Thread.CurrentThread.CurrentCulture.ToString());
info.DateTimeFormat.ShortDatePattern = "dd/MM/yyyy";
System.Threading.Thread.CurrentThread.CurrentCulture = info;
View 2 Replies
Feb 15, 2011
How can I get the following default culture values defined in the Web.Config:
[Code]....
I am not looking for the current culture. I am looking for the default ones on the Web.Config as showed.
View 3 Replies
