Could Not Load File Or Assembly 'Microsoft.Exchange.WebServices, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'
Mar 2, 2011
I'm working on a project that accesses the Exchange Server. Before I replaced the project to a server, everything went fine. But now I'm getting this error.
View 2 Replies
Similar Messages:
Dec 21, 2010
I have a .net web application hosted in Sharepoint 2007. Recently I added a page to launch an application(.exe) from the code behind of a .aspx page. The applicatoin is launched when I test it on my desktop(without Sharepoint). When I deploy the .aspx page and the dll to the Sharpoint, I get an error "Could not load file or assembly 'CheckService, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
View 1 Replies
Jul 19, 2010
I've been using a particular version of a PDF library (PdfSharp), with the dll file in the bin directory (bin/PdfSharp.dll). I use this to prepare, combine, split, and otherwise manipulate PDF files, both those that come from outside my app and those I generate using ReportViewer.
Today I saw there was a new version of the library and naively dropped the new .dll into the bin folder, replacing the old one (I rarely have need to mess with the 2 or 3 dlls in my bin folder and it's been 2 years since I set them up so I wasn't really sure how to proceed and didn't take the time to think too much about it). The PDF generation no longer worked, so I deleted the newer .dll and replaced it with the older one (I have copies in backups, the production server, etc).
Now, although I've confirmed that the dll in the bin folder is the older version (file Properties show correct older version number, file size is older file size, etc), and although the application works correctly, including those parts that call on the library, I can no longer access the data sources for my RDLC files -- when I open an RDLC file in the editor and choose Report->Data Sources, I get this error:
Could not load file or assembly 'PdfSharp, Version=1.2.1269.0, Culture=neutral, PublicKeyToken=f94615aa0424f9eb' or one of its dependencies. The system cannot find the file specified.
I am mystified: I don't understand the connection between a report's data source and this library; I know that the correct version (1.2.1269.0) is in binPdfSharp.dll; and I can find no references to any version of PdfSharp in any file in my application, other than the code that actually calls it (ie, there are no references to it in web.config or the .rdlc files or the dataset .xsd files). I've also been through the registry and find no references to the new version. I've tried deleting the dll and re-adding it using "Add Reference...", and I've tried "Update Reference", all to no avail.
View 1 Replies
May 29, 2010
I'm working on my ASP Application 2.0 framework with AJAX Extension 1.0 installed on my pc. I'm getting an error on my CrystalReportViewer:Could not load file or assembly 'System.Web.Extensions, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)" I already tried some solutions I found in google but it's still im getting the error.:
[URL]Below are the codes for my web.config
[Code]....
Here's my code in the webform
[Code]....
View 2 Replies
Jul 2, 2010
I develop an ASP.NET 2.0 with VS 2008, VB.NET, and sometime a get this exception when web application is launching.
Message Parser Error: Could not load file or assembly 'AjaxControlToolkit, Version = 3.5.40412.0, Culture = neutral, PublicKeyToken = 28f01b0e84b6d53e' or one of its dependencies.The definition from the assembly manifest does not match the assembly reference. (Exception from HRESULT: 0x80131040)
To solve this problem, I need to regenerate the project. I would like to understand why this error append sometime. I try to check the version referenced in project property, try to check the version attribute on Web.Config :
<pages theme="Formulaires" validateRequest="false" styleSheetTheme="Formulaires" enableEventValidation="false" enableViewStateMac="false">
<controls>
<add tagPrefix="ajaxToolkit" namespace="AjaxControlToolkit" assembly="AjaxControlToolkit, Version=3.5.40412.0, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e" />
<add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
</controls>
<namespaces>
<clear/>
<add namespace="System"/>
<add namespace="System.Collections"/>
<add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/>
<add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/>
<add namespace="System.Web"/>
<add namespace="System.Web.Caching"/>
<add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/>
<add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/>
<add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/>
<add namespace="System.Web.UI.HtmlControls"/>
</namespaces>
</pages>
It the correct version... i don't understand about this problem.
View 2 Replies
Jan 13, 2010
I am getting this message on my Page element. However my project references C:Program FilesMicrosoft ASP.NETASP.NET MVC 2AssembliesSystem.Web.Mvc.dllwhich is Version 2.0.0.0Furthermore my Web.config contains
<assemblies>
<add assembly="System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
This is VS2010.I created the blank project with VS2010 and then copied the code (without Web.config) from the old project.
View 5 Replies
Jul 8, 2010
I am getting this error that is related to ReportsViewer. I need to eliminate all references to this library. So where do I need to start deleting the references?
Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'Microsoft.ReportViewer.WebForms, Version=9.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
<add assembly="Microsoft.ReportViewer.WebForms, Version=9.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
View 1 Replies
Sep 2, 2010
I keep getting this strange error (below) on my local machine on the first time the page loads,
Then if I reload it - it loads correctly...
What is really strange is that it does not happen on the server (same settings)
I'm using AJAXControlToolkit.dll version 4.1.40412.2
and this script manager (if not I get the Common.Common.js error)
[Code]....
View 6 Replies
Jan 30, 2011
<add assembly="Microsoft.AnalysisServices, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
this error message appeared after i transfered the web application into another server and run it
the error row is as follow:
<add assembly="Microsoft.AnalysisServices, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
View 1 Replies
Apr 13, 2010
I just migrated myDocuments folder to a new laptop (windows 7, 64 bit). The visual studio project WAS working on my desktop computer (windows XP pro).
Runtime error is:
ASP.NET runtime error: Could not load file or assembly 'Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f
It references the config file, so I am looking to see if I need to add something in there or what?
View 1 Replies
Feb 17, 2010
I have a application in which i have read the mail from outlook. its working fine in local pc . but when i deploy this application on server then it gives me error like: on deploy machine outlook version is office 2007. Could not load file or assembly 'Extensibility, Version=7.0.3300.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
View 2 Replies
Sep 17, 2010
I am getting below error while running my application
Exception in MS Oracle DAAB Method - GetDataSet : Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "DABResource.resources" was correctly embedded or linked into assembly "DBServices" at compile time, or that all the satellite assemblies required are loadable and fully signed.
Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Exception: Exception in MS Oracle DAAB Method - GetDataSet : Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "DABResource.resources" was correctly embedded or linked into assembly "DBServices" at compile time, or that all the satellite assemblies required are loadable and fully signed.
Source Error: [Code]....
I am Having DBServices .dll which is registered in my assembley
Recently i installed VS 2008 in my system.this application is working fine in VS 2005 priviously.Now i am getting above error while running this application in VS2005
View 4 Replies
Mar 4, 2010
I installed Cahrt control of ASP:Net and It works fine on local. I made neccessary changes on web.config but When I deploy it to my site I am getting the error ! It says as below;
Server Error in '/' Application.
Parser Error
Description:An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Could not load file or assembly 'System.Web.DataVisualization, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Source Error:
[Code]....
View 4 Replies
Jan 27, 2010
I followed the instructions to setup the Ajax Control Toolkit.
After that I just create a TabContainer and I'm getting this error when I try to run my website application :
Server Error in '/WebSite3' Application.
View 3 Replies
Feb 25, 2011
I want to add a calendar extender to my website so I downloaded the lastest Ajax Control Toolkit, added the calendar and when I start debugging I get this exception: Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "AjaxControlToolkit.Properties.Resources.NET4.resources" was correctly embedded or linked into assembly "AjaxControlToolkit" at compile time, or that all the satellite assemblies required are loadable and fully signed. I have the dlls in the bin folder... I followed all the steps in the instruction guide for installing the ajax control toolkit.
View 1 Replies
Dec 18, 2010
I face some problems while I host my web application(which is a PowerBuilder V12.0 .Net Web Appliaction Developed By PB V12.0 Classic or Migrated from Old PB Versions as the project files are Converted to ASP.Net *.aspx files) in IIS V6.0 on Windows Server 2003and After Installation of .Net Framework Version 4.0 to match the web application which requires .Net Framework 2.0+
The Error Message I get is as follows:-
Could not load file or assembly 'Microsoft.Expression.Encoder.Api2.dll' or one of its dependencies. The specified module could not be found.
Description:
An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details:
System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.Expression.Encoder.Api2.dll' or one of its dependencies. The specified module could not be found.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Code]....
View 1 Replies
Apr 22, 2010
I am working on project in VS 2008 (ASP.Net, C#).
When I view a page in browser it throws following error.
Could not load file or assembly 'Microsoft.Licensing.Permutation_f50a9_2.0(1907)' or one of its dependencies. The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileLoadException: Could not load file or assembly 'Microsoft.Licensing.Permutation_f50a9_2.0(1907)' or one of its dependencies. The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
Source Error:
[Code]....
View 1 Replies
May 25, 2010
im facing the below issue can anyone tell me how to resolve itCould not load file or assembly 'Microsoft.Web.UI.WebControls' or one of its dependencies. The system cannot find the file specified.
View 5 Replies
Oct 30, 2010
Hi,
I am trying to developing a project which is getting mssql version, creating tables,views and insert default datas to database.
I have to develeope it working in MSSQL 2005-2008.
Now my project uses using Microsoft.SqlServer.Management.Smo; using Microsoft.SqlServer.Management.Common;
name spaces from MSSQL dlls.it works fine in serves which has MSSQL2008.Bu d-today i tried it in a server which has MSSQL2005 nad it failed.
Error;
Could not load file or assembly 'Microsoft.SqlServer.SqlClrProvider, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
So.Where can i find this namespace and and i need to add this namespace dll to my project.
Else i need another way to do these process working in 2005 nad 2008.
View 4 Replies
Jul 22, 2010
Server Error in '/' Application.
Could not find any resources appropriate for the specified culture or the neutral culture. Make sure
"AjaxControlToolkit.Properties.Resources.resources" was correctly embedded or linked into assembly "AjaxControlToolkit" at compile time, or that all the satellite assemblies required are loadable and fully signed.
Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Resources.MissingManifestResourceException: Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "AjaxControlToolkit.Properties.Resources.resources" was correctly embedded or linked into assembly "AjaxControlToolkit" at compile time, or that all the satellite assemblies required are loadable and fully signed.
Source Error:
[Code]....
Stack Trace:
[Code]....
Version Information: Microsoft .NET Framework Version:2.0.50727.3607; ASP.NET Version:2.0.50727.3614
View 1 Replies
Nov 1, 2010
IIS: 5.1(local and IIS 7.0 online)
I am getting the error at localhost. I haven't checked online yet.
The whole thing was working at ASP.NET 3.5 and now when i upgraded to ASP.NET 4.0 I get the following error.
The Stack Trace is
VisualStudio 2010, the error is
This is not happening everytime.
The first runs always show this error.
View 1 Replies
Sep 22, 2010
I have developed a Web application in VS2008. It works perfectly on my development PC. When I publish and upload to the shared Windows hosting service (which supports ASP.NET 3.5), it fails (even when accessing it from my development PC). The error message is: Could not load file or assembly 'Microsoft.mshtml, Version=7.0.3300.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.I have read many forum posts on the subject, and have tried the recommended solutions:
Set the reference to Copy Local - VS2008 does not allow Copy Local for ASP.NET references, just for WinForms references.Copy mshtml.dll into the installation directory - I have tried 3 different versions of the file, both in the root directory and /bin/, under both the names "mshtml.dll" and "Microsoft.mshtml.dll". None work.install the Interoperability Assemblies from Visual Studio onto the server by running "vs_piaredist.exe" - I don't have admin access to the server and the hosting company won't do it.
View 2 Replies
Jan 28, 2011
I had web application developed in VS 2005 + Sql server 2005 + Ajax 1.0 Extension . (Developed in Windows Server 2005) Now i am migrating to VS 2008.(Windows Server 2008 + Sql server 2008)
After opening and compile my Existing application in VS 2008,i am getting error.
Errors :-
Unable to load file or assembly 'System.web.Extenstions'' version=1.0.61025. (I think it because of AJAX Extension version.So i installed AJAX Extension 1.0 but it will give me ambiguous error so i uninstalled.I am added reference for version=3.5.0 but again unsuccessful.) What i will do now? Also i used 'Microsoft.SqlServer.SmoEnum', Version=9.0.242.0 in VS 2005. (Are i have to change it to version=10.0.0.0? by adding reference to new version.) I also used crystal report.(Is there is anything to do with it?)
View 1 Replies
Dec 10, 2010
I am having an issue that I do not quite understand. I had an ASP project that I built using
Code:
<add assembly="Microsoft.Office.Interop.Word, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71E9BCE111E9429C"/>
while I still had Office 2007 still on my development PC. I recently upgraded to Office 2010 and even though the web.config file still remains with the above assembly reference, when I publish it and run it now i keep getting the following error ...
Quote:
Could not load file or assembly 'Microsoft.Office.Interop.Word, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specified.
I also have installed the PIA for Version=14.0.0.0 on the server but I still get the same result.
View 12 Replies
Aug 25, 2010
I have created an application which runs fine in VS2010.Now i am trying to host that application using inetmgr.When i try to browse the page from inetmgr content view then i get the "Parser Error Message: Could not load file or assembly 'System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified".If i browse the page from VS i am able to do it.I am not able to host the app. may be the reason is the above stated error.
View 1 Replies