If I set Thread Culture and UICulture for one ASPX, after pass for that page, all my aspx that use the same thread(not same request) will have the same Culture?
Because I need to set Culture just for one ASMX
I am getting below error while running my application
Exception in MS Oracle DAAB Method - GetDataSet : Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "DABResource.resources" was correctly embedded or linked into assembly "DBServices" at compile time, or that all the satellite assemblies required are loadable and fully signed.
Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Exception: Exception in MS Oracle DAAB Method - GetDataSet : Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "DABResource.resources" was correctly embedded or linked into assembly "DBServices" at compile time, or that all the satellite assemblies required are loadable and fully signed.
Source Error: [Code]....
I am Having DBServices .dll which is registered in my assembley
Recently i installed VS 2008 in my system.this application is working fine in VS 2005 priviously.Now i am getting above error while running this application in VS2005
I need to change culture of the specific aspx page bases on the main user's culture.I am able to fetch the data that which culture main user have.But some how I am not able to set the same culture for that aspx page.I had written the below code for that.
[Code]....
But that is not working it sets the default culture of the browser.
I followed the instructions to setup the Ajax Control Toolkit.
After that I just create a TabContainer and I'm getting this error when I try to run my website application :
Server Error in '/WebSite3' Application.
I want to add a calendar extender to my website so I downloaded the lastest Ajax Control Toolkit, added the calendar and when I start debugging I get this exception: Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "AjaxControlToolkit.Properties.Resources.NET4.resources" was correctly embedded or linked into assembly "AjaxControlToolkit" at compile time, or that all the satellite assemblies required are loadable and fully signed. I have the dlls in the bin folder... I followed all the steps in the instruction guide for installing the ajax control toolkit.
View 1 RepliesServer Error in '/' Application.
Could not find any resources appropriate for the specified culture or the neutral culture. Make sure
"AjaxControlToolkit.Properties.Resources.resources" was correctly embedded or linked into assembly "AjaxControlToolkit" at compile time, or that all the satellite assemblies required are loadable and fully signed.
Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Resources.MissingManifestResourceException: Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "AjaxControlToolkit.Properties.Resources.resources" was correctly embedded or linked into assembly "AjaxControlToolkit" at compile time, or that all the satellite assemblies required are loadable and fully signed.
Source Error:
[Code]....
Stack Trace:
[Code]....
Version Information: Microsoft .NET Framework Version:2.0.50727.3607; ASP.NET Version:2.0.50727.3614
how can to get culture info or just culture name from the datetime string e.g i have strings like: "16/02/2008" or "23/02/2008 " can i know the culture name from the above datetime strings?
View 3 RepliesI have a scenario where I am using CalendarExtender on a page with UICulture and Culture as "en-US".
But I want to show CalendarExtender in "de-DE" culture. I know that I can set up EnableScriptGlobalization="True" EnableScriptLocalization="true" for ScriptManager and CalendarExtender will show up as per culture defined for page. But this does not work for me because I can not change page level UICulture and Culture from "en-US" to "de-DE" ( If I do so, I face double value issue. e.g. double d = 12.34; is displayed as 12,34 on UI and then its unmanagable while editing values).
So coming back to my problem, Can I just change culture for CalendarExtender so that page culture is set to "en-US" and calender is shown in some different language? I know its not something straightforward, I might need to dig up source code.
I created a custom clander server control basing on "System.Web.UI.WebControls.Calandar" and when i change the culture from login Screen (Ex:- Spanish) i am setting only the UI Culture in the page base class. When i had the Both "CurrentUICulture" and "CurrentCulture" set i could see the Day (Mon Tue) of the my custcalander control in the corresponding culture, but when i commented out i see them in English only (not in the corresponding culture set while loggin in. The reason why i commented out the "CurrentCulture" was that when i set this the middle tier or code behind files also running in this culture (as we are setting on the CurrentThread culture) and causing decimal data coming in this culture (Ex:- spain) and so on. So i only set the "CurrentThread.CurrentUICulture" only to corresponding culture and not the "Thread.CurrentThread.CurrentCulture". Is there a way to acheive this, i mean How to make the Day (Ex:- Mon, Tue, Wed) in the corresponding culture with out setting "Thread.CurrentThread.CurrentCulture"?
/// <summary>
/// Current selected culture
/// </summary> [code]....
I want to set culture info for my full application. where're i say datetime.now, it should give datetime based on my cultureinfo i set. how do i do it?
View 6 Repliesi want to parse a datetime from one culture to another but i am getting exception "String was not recognized as a valid DateTime". I have already tried the follwoing code:
DateTime creationTime = DateTime.Parse("16/02/2010 12:37:27", CultureInfo.CreateSpecificCulture("en-US"));
DateTime creationTime = DateTime.Parse("16/02/2010 12:37:27", CultureInfo.CreateSpecificCulture(CultureInfo.CurrentCulture.Name));
DateTime creationTime = DateTime.Parse("16/02/2010 12:37:27", CultureInfo.InvariantCulture);
My current culture is united states i am getting the date sting in UK format then plz any idea how can i convert it without hard coding like this: DateTime creationTime = DateTime.Parse("16/02/2010 12:37:27", CultureInfo.CreateSpecificCulture("en-GB"));
Is it possible to set TextBox's culture to other then en-EN? If yes then how? I need to be able to allow users to type japanese in textboxes.
View 9 RepliesI have a website calling a WCF service and I want the service to run with the browser culture. I am using the service in ASP.NET compatibility mode. This is working so far - It is possible to set the culture of the WCF service using the culture and uiCulture of the globalization section.
My problem is that enableClientBasedCulture shows no effect. These are my globalization settings for the service:
<globalization enableClientBasedCulture="true" culture="auto" uiCulture="auto"/>
The service ignores these settings and uses the default culture.
Something I am missing? Is enableClientBasedCulture the wrong way to transfer the culture in this scenario?
I'm sending parameters to paypal as hidden form vars.but my site's culture is Danish.
So "50,00" is the value for "amount_1"
<input type="hidden" name="amount_1" value="50,00" />
I'm using this code that converts the 50 to "50,00"
item.PricePaid.ToString("#.00")
I believe the number should be like: "1234.56" Is there a way to set the culture to en-US just on this process?
I'm having a problem when I deploy my web application in different servers. There seems to be an inconsistency in some DateTimeFormat patterns, like ShortDatePattern, using the same culture (pt-BR).
In my development machine (Windows 7, .NET 4 installed, application targeting .NET 3.5) and a Windows Server 2008 R2 (with the application targeting .NET 4) server the ShortDatePattern is "dd/MM/yyyy" - which is the correct, I guess.
In the production server (Windows Server 2003, using .NET 3.5) it is "d/M/yyyy". It is causing me tons of trouble.
I could solve the issue by setting the patterns by hand, but I'd really like to avoid doing this every time I need to output a date. Specially since this will be non-trivial in many places (like where I use MVC's Html.TextBoxFor) and will require a good amount of rewriting.
If there's a way of changing the patterns for the entire web application in one place it would be great. I've tried the following approach in the Global.asax.cs file, with no success:
CultureInfo info = new CultureInfo(System.Threading.Thread.CurrentThread.CurrentCulture.ToString());
info.DateTimeFormat.ShortDatePattern = "dd/MM/yyyy";
System.Threading.Thread.CurrentThread.CurrentCulture = info;
How can I get the following default culture values defined in the Web.Config:
[Code]....
I am not looking for the current culture. I am looking for the default ones on the Web.Config as showed.
I can't have my culture on CalendarExtender ? I've tryed to set Culture and UICulture to auto on the container page, but calendar still in US ?this CalendarExtender is on an Usercontrol.
View 2 RepliesThis is a pretty basic question. Since browsers have a culture setting that the web app uses to decide which locale to use, should I still have a "language" button for users to be able to override the culture? Why or Why Not? To me it doesn't make sense to have a button there if the user had already set their language in their system.
View 1 Repliesi'm trying to set my website's culture programmatically, so when a user clicks a button they can change the text on the page from english to spanish. here's my code:
protected void btnChangeLanguage(object sender, EventArgs e)
{
Thread.CurrentThread.CurrentCulture = new CultureInfo("es");
Thread.CurrentThread.CurrentUICulture = new CultureInfo("es);
}
<asp:Label ID="lblDisplay" runat="server" meta:ResourceKey="lblDisplay" />
<asp:Button ID="btnChangeLanguage" runat="server" Text="Change Language"
OnClick="btnChangeLanguage_Click" />
i have a Default.aspx.resx file with a key/value of: lblDisplay.text/English and a Default.aspx.es.resx file with a key/value of: lblDisplay.text/Espanol. i can't get my Label's text to change from "English" to "Spanish". anyone see what i'm doing wrong?
I am working on a website web site where each user has a culture setting to allow control of resources displayed. The main page has two views, one the log on screen, the second the main menu.
When first loaded the page displays with the culture settings of the previous user (if any). If I then log on as a user with a different culture setting the view changes to the main menu without changing the culture. Go to another page and the user's correct culture settings are picked up, go back to the main menu, uses the correct culture etc.
This is logical but is there a way (without redesigning the site to have a separate log in page and main menu) to reset the culture to the new user's when switching view?
I have a very simple bilingual site with a link at the bottom that will allow users to switch between the two languages (english/french). the the web.config I have the following line:
<globalization culture="auto" uiCulture="auto" />
This allows for whatever the users browser culture is to be the default lanauge but I'd still like the ablility for them to click a bottom button to toggle. whats the best what to go about doing this?
In asp.net multilingual website in english Uk and swedish, i have three rsources file
1. en-GB.resx
2. sv-SE.resx
3. Culture neutral file.
I have create one base class and all pages is inherited from that class. There i write following lines to set UICULTURE and culture
1. Thread.CurrentThread.CurrentUICulture = CultureInfo.CurrentUICulture.Name;
2. Thread.CurrentThread.CurrentCulture = CultureInfo.CurrentCulture.Name;
Question: Suppose my browser language is Swedish(sv-SE) then this code will run because it find CurrentUICulture and CurrentCulture values as sv-SE.
Now if suppose browser language is Swedish(sv) only, in that case values will be set as
CurrentUICulture = sv; and CurrentCulture = sv-SE
Now the problem is that user can able to view all text in Culture neutral resource file that i kept as english while all decimal saperators, currency and other will be appear in swedish.
It looks confusing to usr.
What would be right approach. I am thinking following solution.
1. i can create extra resource file for sv also.
2. I check value of CurrentUICulture in base class and if it is sv then replace it with sv-SE
Please correct me which one is right approach or Is there any other good way of doing?
How can I displays currency value in US culture format like $5,123,456.55. I know that I can do it using ToString method but don't know how?
View 2 RepliesI am now building the NerdDinner tutorial from asp.net/mvc.
The problem is that when posting back a created model the ModelState is not valid. The model has two double values that are being set from jscript(to values like 44.2).
I checked the ModelState values and the value Culture is "ro-RO" (I am from Romania) so I guess it expects values like "44,2". How can I ignore the culture,or change the validation?
As per MSDN - Culture is name for traiditional wotd locale But at som many places, people use phrase like . "I am trying to implement culture and locale" Are they same or different?
View 2 Replies