As the header says - ajax failed to load with pipeline set to integrated. When I turn it to classic it will work but not the routing !! I use asp.net 4.0 I register my route in global.asax
void
RegisterRoutes(System.Web.Routing.RouteCollectionroutes)
{routes.MapPageRoute("Article",
"{article}",
"~/ui/article/Show.aspx");}
Development environment: VS2008, Win XP
Iam working on a web form that incorporate ListView control with Ajax RoundCornerExtender.On my machine everything works fine, and looks okay. After uploading the page to the host server the ListView Item DIV with the round corners looks broken, I contacted the host server support and they asked me to check for version issues, I reinstalled the Ajax Control Toolkit as well as the .Net Framework 3.5 but still no change. When I change the ASP.NET version on the control panel from ver. 2.0 to ver. "2.0 Integrated pipeline" (they say its ver. 3.5) all the Ajax controls disapear from the page.
One more thing I noticed, when the ASP.NET ver. on control panel is set to "2.0 Integrated pipeline" (3.5) and I execute the following -
Response.Write(System.Environment.Version.ToString)
I get ver. 2.0.50727.4200 which is ASP.NET 2.0, why things looks okay on my machine and look different on host server ?
I am looking for code to upload to a shared web host that will return whether or not the web site is running in integrated pipeline mode.
View 1 RepliesI am using the following code for URL RewritePath
[code]....
but its giving the following error
CurrentNotification = 'System.Web.HttpContext.Current.CurrentNotification' threw an exception of type 'System.PlatformNotSupportedException'
base {System.NotSupportedException} = {"This operation requires IIS integrated pipeline mode."}
}
}
we are running a complex 64-bit ASP.NET 2.0 application on W2008 R2 Standard and stress tests done with VS2008 Team System have indicated that integrated pipeline mode is 30% slower than classic mode.
We have compared the application traces extensively and it appears that integrated mode is uniformly slower than classic. That is, there is no single point that causes delays in integrated mode.
This is quite the opposite to everything Microsoft says about the integrated pipeline, so it might be that there is something quite wrong with the configuration of the integrated mode or the server. But we have not found any settings that would have any effect on this. Some complaints that Sharepoint and reporting services are slower in integrated mode can be found, but our application does not use them so this is quite likely unrelated.
Is it possible to check if our code is executing in Integrated Pipeline Mode or not?
There are some ASP.NET class properties that only work in Integrated Pipeline Mode, and I want to avoid raising an exception if there is a way to test if our code is executing in that environment or not.
I'm working on a website with legacy Classic ASP pages (being converted to ASP.NET on an as needed basis) and new ASP.NET pages. Use of IIS 7 Integrated Pipeline has been very helpful with our configuration. For example, we were able to get forms authentication working auto-magically with the classic ASP pages simply by configuring the appropriate sections of the web.config file (i.e. no changes were required to the Classic ASP pages, for more info see this).
A colleague of mine believes that custom error pages, as specified in the web.config <customErrors> section, should also be auto-magically applied to the classic ASP pages, but for our website it only works for the ASP.NET pages. Nor have I been able to find any information describing the capability of applying custom error pages to Classic ASP with the IIS 7 integrated pipeline. Is it possible to apply custom error pages to Classic ASP pages per a web.config for an website running under IIS7 with integrated pipeline? If so, how?
Firstly there's a great overview of the IIS7 HTTP request lifecycle and various settings that affect performance here:
ASP.NET Thread Usage on IIS 7.0 and 6.0
Very specifically though, in dotNet 4 the defaults for maxConcurrentRequestsPerCPU and requestsQueueLimit are set to 5000. E.g. equivalent to: (in aspnet.config):[code]....
Seems to me that on a multi-CPU/core server the requestQueueLimit here will always be invoked well berfore the 'perCPU' limit. Thus, if a max of 5000 requests per CPU is what you actually want then I would expect that the requestQueueLimit needs to be increased to 5000 * CPUCount or just disabled altogether.
Is my interpretation correct? If so can I disable requestQueueLimit? (set it to zero?). The documentation on this setting doesn't appear to address this question (so maybe I'm missing something or misreading?)
** side note from the above article: The requestQueueLimit is poorly named. It actually limits the maximum number of requests that can be serviced by ASP.NET concurrently. This includes both requests that are queued and requests that are executing. If the "Requests Current" performance counter exceeds requestQueueLimit, new incoming requests will be rejected with a 503 status code)
I try to install IIS 7 on my Win 7, whenever I check . Net Extensibility . AsP .net under Application Development Feature and run http://localhost I get http error 500.24. An asp .net setting has been detected that does not apply in Integrated managed pipeLine mode
View 1 Repliesam trying to write an HttpModule that will work in IIS7 with integrated pipeline mode AppPool. Within this module I need to access Session variables and to be able to capture the Session Start and End events. I have found a couple of articles on this topic that indicate the need to modify the behavior of the HttpHandler in PostAcquireRequestState to force the Session for the context to be initialized. The article I am using as a template is posted here:[URL]In my case I am getting the following error:
[NullReferenceException: Object reference not set to an instance of an object.] System.Web.PipelineModuleStepContainer.GetEventCount(RequestNotification notification, Boolean isPostEvent) +30 System.Web.PipelineStepManager.ResumeSteps(Exception error) +1112
System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) +113 System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +616
I believe that this error implies a problem with attempting to attach an event handler multiple times. I am aware that the modules Init function can be called more than once and have set a static initialization flag which ensures that I will only ever attach the event handler once.In the most condensed form my code is as follows:
public class HttpModule : IHttpModule, IRequiresSessionState
When I run my website on local server asp.net routing works very well, but when I deploy it on a remote server ( asp 4.0 integrated pipeline ) it always returns with 404 error.
My url route is very simple, a stored procedure gets image's id and then displays it.
Global.asax:
[Code]....
Default.cs:
[Code]....
I am trying to export crystal report to pdf in asp.net, though the code is working well on localhost but on server I get error
HTTP Error 500.23 - Internal Server ErrorAn ASP.Net setting detected that does not apply in Integrated managed pipeline mode.
The crystal report is showing abnormal behaviors.I am using a CrystalReportViewer on which i have set the CrystalReportSource1 using the viewer Tasks.
The code on page load is :-
cn.Open();
DataSet ds = new DataSet();
string sql = "select * from Test";
OleDbDataAdapter da = new OleDbDataAdapter(sql, cn);
da.Fill(ds);
[Code].....
During the troubleshooting i encountered another unusual issue, where i tried a new crystal report with just simple report. That simple crystal report is not showing data & the toolbar images are not rendered. I googled on this but didn't found conclusive thing.
I am trying to get a asp.net 4.0 beta 2. website running that is working on my dev machine, but not when I published to my server. Where I get the HTTP 500.22 error when using the 4.0 as application pool and "Integrated" in "Managed Pipeline Mode".
View 1 RepliesI have an existing ASP.NET application and there is a requirement in which i need to use ASP.NET MVC in that.
So altogether i need to mixing ASP.NET Webforms and ASP.NET MVC I am following an article [URL] I am done with all the steps. But its not working as expected.
[Code]....
When ever i add this to the web.config i am getting error. HTTP Error 500.22 - Internal Server Error An ASP.NET setting has been detected that does not apply in Integrated managed pipeline mode. ERROR CODE: 0x80070032 My OS is Vista Enterprise Edition.
I wanted to make extensive changes to a project, so I created a copy of the project folder. In the new version, I renamed all of my namespaces and a few classes. Everything compiles and runs, however, I am getting this javascript error. 'ASP.NET Ajax client-side framework failed to load' and my 'Auto complete' text box no longer works. This error does not occur in the original project.
The HTML source between the original and the new project are identical, save for the few lines of code that throw this error. The web.config files are identical.
I got gzip working, but there are issues with IE. (works fine with FF and Chrome) Message: ASP.NET Ajax client-side framework failed to load. (and many other js related errors)
How can I prevent gzip compression on ie browsers ?? Other people who had similar issues enabled compression in IIS and that seems to solve the issue, but I can't do this on my discount machine...
This is what I use:
HttpApplication app = (HttpApplication)sender;
string acceptEncoding = app.Request.Headers["Accept-Encoding"];
Stream prevUncompressedStream = app.Response.Filter;
if (acceptEncoding != null && acceptEncoding.Length != 0)
[Code]....
i am facing a serious problem with ajax that ASP.NET Ajax client-side framework failed to load and also sys is undefined.i have asp.net 3.5 service pack 1 installed on server.also using toolkitscriptmanager on pages have checked iis for .axd extension.It is there.system date is okk.have latest version of ajaz control toolkit.on localhost it is working fine.but giving error on live server.
View 3 RepliesMy working Web site today suddenly got this problem after last publish, In new publish we didn't hit any thing regarding Ajax dll or Script Managers.
View 1 RepliesI have seen all the previous posts but did not got any solution. I am using URL routing and the website runs fine untill i change the global.asax file. Till then all the configurations runs properly. The web.config is also correct and ihave added the modules required for URL routing. Now when i change the global.asax file, i get the following error on my masterpage:
//<![CDATA[
if (typeof(Sys) === 'undefined') throw new Error('ASP.NET Ajax client-side framework failed to load.');
//]]>
[code]...
what needs to be done since I'm trying to interpert other people's code. Anyway, here is my dilimma. I am running Windows 7 Professional x64 with IIS 7 and coding in VS 2010 using .NET 4 for the ASP.NET site. I installed the AjaxControlToolkit.NET4 in VS 2010 with no issues. I even used the Calendar Extender with a text box and image with no problems, at least when debugging. When I go to publish it out on my test IIS7 site
View 5 RepliesI have uploaded my application made in vs 2010 and asp.net 3.5 framework on windows Server 2003 R2. As i run my app i get an error1.ASP.NET Ajax client-side framework failed to load.2. sys is undefined.I already have 3.5 framework installed on my server and th latest version of ajax tootlkit dll added to my app.
View 1 RepliesI had a working .net website in a working VS2008 environment on a WinXP machine.Moved to Win7 machine, and now this maddening error comes up. I have no clue!Since the site and the development environment were working before, I can only assume it is an environmental problem. But what?
View 21 RepliesI have developed an ERP module wihch runs on intranet. with ASP.NET /AJAX. It runs perfectly in my localhost. IIS. But when I try to run it on my development, It gives some errors of AJAX. undefined string literals. Microft ajax client-sisde framework failed to load. sys is undefined.. I've check my web.config file. But I cant find any problems into it.
View 8 RepliesI am using VS2010, .Net 4. I am trying to add a ScriptManager to my page, so I can reference an AJAX Enabled WCF Service. When I add the ScriptManager control to my page and view it - I get the error shown below. I have no clue how to resolve it. I get the error by simply putting the control on my page (not reference the WCF Service).
Error seen when "viewing source":
(script src="/ScriptResource.axd?d=cN6E-bUIIAhb0PYSsbqev2ndhi3W3ltVtHjrJ-T5yBfO3jQBEHWjU39PLAybm-JIxwU4s59EhJFweLHmABl1zA2yo8fKhHYHGS7RTy1fhECuWqXbMMy5aCuSlqHbfp3advQcwp11SqaDwkvU1YN6Bw2&t=ffffffffbd2983fc" type="text/javascript")(/script)
(script type="text/javascript")
//(![CDATA[
if (typeof(Sys) === 'undefined') throw new Error('ASP.NET Ajax client-side framework failed to load.');
//]])
(/script)
Actually, my problem is that I am not able to access the service. I am referencing it inside the ScriptManager and have the javascript code in place, but Firefox is reporting that it cannot find it. Says it is not defined. I do not know how to test this or determine where it is failing.
error message: Ajax client-side framework failed to load"?
View 1 Replies