.net - IIS7 Integrated Pipeline: Interaction Between MaxConcurrentRequestsPerCPU And RequestsQueueLimit Settings?
Jan 19, 2011
Firstly there's a great overview of the IIS7 HTTP request lifecycle and various settings that affect performance here:
ASP.NET Thread Usage on IIS 7.0 and 6.0
Very specifically though, in dotNet 4 the defaults for maxConcurrentRequestsPerCPU and requestsQueueLimit are set to 5000. E.g. equivalent to: (in aspnet.config):[code]....
Seems to me that on a multi-CPU/core server the requestQueueLimit here will always be invoked well berfore the 'perCPU' limit. Thus, if a max of 5000 requests per CPU is what you actually want then I would expect that the requestQueueLimit needs to be increased to 5000 * CPUCount or just disabled altogether.
Is my interpretation correct? If so can I disable requestQueueLimit? (set it to zero?). The documentation on this setting doesn't appear to address this question (so maybe I'm missing something or misreading?)
** side note from the above article: The requestQueueLimit is poorly named. It actually limits the maximum number of requests that can be serviced by ASP.NET concurrently. This includes both requests that are queued and requests that are executing. If the "Requests Current" performance counter exceeds requestQueueLimit, new incoming requests will be rejected with a 503 status code)
View 4 Replies
Similar Messages:
Sep 20, 2010
we are running a complex 64-bit ASP.NET 2.0 application on W2008 R2 Standard and stress tests done with VS2008 Team System have indicated that integrated pipeline mode is 30% slower than classic mode.
We have compared the application traces extensively and it appears that integrated mode is uniformly slower than classic. That is, there is no single point that causes delays in integrated mode.
This is quite the opposite to everything Microsoft says about the integrated pipeline, so it might be that there is something quite wrong with the configuration of the integrated mode or the server. But we have not found any settings that would have any effect on this. Some complaints that Sharepoint and reporting services are slower in integrated mode can be found, but our application does not use them so this is quite likely unrelated.
View 2 Replies
Jan 2, 2011
am trying to write an HttpModule that will work in IIS7 with integrated pipeline mode AppPool. Within this module I need to access Session variables and to be able to capture the Session Start and End events. I have found a couple of articles on this topic that indicate the need to modify the behavior of the HttpHandler in PostAcquireRequestState to force the Session for the context to be initialized. The article I am using as a template is posted here:[URL]In my case I am getting the following error:
[NullReferenceException: Object reference not set to an instance of an object.] System.Web.PipelineModuleStepContainer.GetEventCount(RequestNotification notification, Boolean isPostEvent) +30 System.Web.PipelineStepManager.ResumeSteps(Exception error) +1112
System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) +113 System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +616
I believe that this error implies a problem with attempting to attach an event handler multiple times. I am aware that the modules Init function can be called more than once and have set a static initialization flag which ensures that I will only ever attach the event handler once.In the most condensed form my code is as follows:
public class HttpModule : IHttpModule, IRequiresSessionState
View 1 Replies
Mar 8, 2011
As the header says - ajax failed to load with pipeline set to integrated. When I turn it to classic it will work but not the routing !! I use asp.net 4.0 I register my route in global.asax
void
RegisterRoutes(System.Web.Routing.RouteCollectionroutes)
{routes.MapPageRoute("Article",
"{article}",
"~/ui/article/Show.aspx");}
View 3 Replies
May 3, 2010
I am looking for code to upload to a shared web host that will return whether or not the web site is running in integrated pipeline mode.
View 1 Replies
Dec 14, 2010
I am using the following code for URL RewritePath
[code]....
but its giving the following error
CurrentNotification = 'System.Web.HttpContext.Current.CurrentNotification' threw an exception of type 'System.PlatformNotSupportedException'
base {System.NotSupportedException} = {"This operation requires IIS integrated pipeline mode."}
}
}
View 10 Replies
May 3, 2010
Is it possible to check if our code is executing in Integrated Pipeline Mode or not?
There are some ASP.NET class properties that only work in Integrated Pipeline Mode, and I want to avoid raising an exception if there is a way to test if our code is executing in that environment or not.
View 1 Replies
Oct 6, 2010
I'm working on a website with legacy Classic ASP pages (being converted to ASP.NET on an as needed basis) and new ASP.NET pages. Use of IIS 7 Integrated Pipeline has been very helpful with our configuration. For example, we were able to get forms authentication working auto-magically with the classic ASP pages simply by configuring the appropriate sections of the web.config file (i.e. no changes were required to the Classic ASP pages, for more info see this).
A colleague of mine believes that custom error pages, as specified in the web.config <customErrors> section, should also be auto-magically applied to the classic ASP pages, but for our website it only works for the ASP.NET pages. Nor have I been able to find any information describing the capability of applying custom error pages to Classic ASP with the IIS 7 integrated pipeline. Is it possible to apply custom error pages to Classic ASP pages per a web.config for an website running under IIS7 with integrated pipeline? If so, how?
View 1 Replies
Aug 16, 2010
I try to install IIS 7 on my Win 7, whenever I check . Net Extensibility . AsP .net under Application Development Feature and run http://localhost I get http error 500.24. An asp .net setting has been detected that does not apply in Integrated managed pipeLine mode
View 1 Replies
Sep 8, 2010
When I run my website on local server asp.net routing works very well, but when I deploy it on a remote server ( asp 4.0 integrated pipeline ) it always returns with 404 error.
My url route is very simple, a stored procedure gets image's id and then displays it.
Global.asax:
[Code]....
Default.cs:
[Code]....
View 6 Replies
May 7, 2015
I am trying to export crystal report to pdf in asp.net, though the code is working well on localhost but on server I get error
HTTP Error 500.23 - Internal Server ErrorAn ASP.Net setting detected that does not apply in Integrated managed pipeline mode.
The crystal report is showing abnormal behaviors.I am using a CrystalReportViewer on which i have set the CrystalReportSource1 using the viewer Tasks.
The code on page load is :-
cn.Open();
DataSet ds = new DataSet();
string sql = "select * from Test";
OleDbDataAdapter da = new OleDbDataAdapter(sql, cn);
da.Fill(ds);
[Code].....
During the troubleshooting i encountered another unusual issue, where i tried a new crystal report with just simple report. That simple crystal report is not showing data & the toolbar images are not rendered. I googled on this but didn't found conclusive thing.
View 1 Replies
May 30, 2010
Is it possible to determine the managed pipeline IIS7 is running under in ASP.NET?
View 1 Replies
Apr 23, 2010
Development environment: VS2008, Win XP
Iam working on a web form that incorporate ListView control with Ajax RoundCornerExtender.On my machine everything works fine, and looks okay. After uploading the page to the host server the ListView Item DIV with the round corners looks broken, I contacted the host server support and they asked me to check for version issues, I reinstalled the Ajax Control Toolkit as well as the .Net Framework 3.5 but still no change. When I change the ASP.NET version on the control panel from ver. 2.0 to ver. "2.0 Integrated pipeline" (they say its ver. 3.5) all the Ajax controls disapear from the page.
One more thing I noticed, when the ASP.NET ver. on control panel is set to "2.0 Integrated pipeline" (3.5) and I execute the following -
Response.Write(System.Environment.Version.ToString)
I get ver. 2.0.50727.4200 which is ASP.NET 2.0, why things looks okay on my machine and look different on host server ?
View 1 Replies
May 19, 2010
Our code relies on checking the Context.User.Identity value in the Global.asax Application AuthenticateRequest(...) method to retrieve some information about the logged in user. This works fine in classic mode but when I flip IIS to use the Integrated Pipeline "Context.User" comes back as null, but only intermittently.I have < authentication mode="Windows"> and only Windows Auth enabled in the Virtual Directory.
View 1 Replies
Feb 7, 2010
I am trying to get a asp.net 4.0 beta 2. website running that is working on my dev machine, but not when I published to my server. Where I get the HTTP 500.22 error when using the 4.0 as application pool and "Integrated" in "Managed Pipeline Mode".
View 1 Replies
Dec 8, 2010
I fill a third-pard component variable in Global.Application_BeginRequest(). Everything is fine until I set IIS7 into the Integrated mode. In that case the method Application_BeginRequest() is not called (Application_Start is ok).May be some module is registered wrong?(I have found a same problem here on forum, but without a solution:[URL]
View 1 Replies
Jun 7, 2010
I have an application we bought that I need to integrate, and it uses jakarta connection to get to the application from IIS.So, the basic operation is
View 1 Replies
Sep 16, 2010
I just switched from Classic Mode to Integrated Mode and now HttpContext doesn't seem to exist in my ASP.NET application. I can't even add a Watch to HttpContext nor to HttpContext.Current.
I'm using FluorineFX where in the Web.config a HttpModule is defined. Apparently, in IIS7 Integrated Mode, these HttpModules need to be added to the Modules section in System.WebServer. I have done this, but now I'm having this HttpContext problem...
Code is in a simple service class being called by Flex (amf).
if (HttpContext.Current.User.Identity != null)
{
...
Web.Config (I don't know how to display this properly in Stack...):
<?xml version="1.0" encoding="utf-8" ?>
[Code]....
View 1 Replies
Jun 30, 2010
I have an existing ASP.NET application and there is a requirement in which i need to use ASP.NET MVC in that.
So altogether i need to mixing ASP.NET Webforms and ASP.NET MVC I am following an article [URL] I am done with all the steps. But its not working as expected.
[Code]....
When ever i add this to the web.config i am getting error. HTTP Error 500.22 - Internal Server Error An ASP.NET setting has been detected that does not apply in Integrated managed pipeline mode. ERROR CODE: 0x80070032 My OS is Vista Enterprise Edition.
View 1 Replies
Jul 27, 2010
In IIS6 the scenario below is working perfectly.I have an HttpModule called URLRedirect which examines URLS and by using RegEx rewrites of applicable. An example is a URL "/doc47.pdf" gets redirected to docpdf.ashx?id=47 Then the docpdf.ashx used the id value and, using a database builds an application/pdf document and returns it. Since I need to validate that the user has access to the data, the first line of the ProcessRequest(HttpContext context) function is:if (context.User.Identity.IsAuthenticated) ..... This is where the problem occurs, but more details first.
On a webpage, access to which is restricted to lgged on users who meet certain criteria there is a link which allows the user to present the page as a PDF document. This is achieved by using javascript to open a popup window using the window.open("/doc47.pdf", ... ) function.This all works fine under IIS6 and under IIS7 if I change the mode to Classic. But, under IIS7 in integrated mode, the following happens.The line in doc.ashx described above raises an exception because context.User == null. But, and this is interesting, if instead of using the link that opens the popup window I instead type /doc.pdf?id=47 into the address bar, the PDF document displays correctly.So this indicates to me that the URLRedirect Module is somehow losing the logged on user information.
View 1 Replies
Oct 21, 2010
I have an ASP.NET 2.0 web site hosted on Windows Server 2008 with IIS 7. I am using InProc session mode (specified in web.config). My client wants the timeout to be of 3 hours, meaning if the web site is idle, session should remain alive for 3 hours. Currently, what is happening is that if the web site is idle for 20-30 min. and if the user to tries to access any link, it redirects to login page.
I searched on internet and did all the possible settings (as follows):
In web config, session state, time out = 180 minutes.
In web config, forms authentication, time out = 180 minutes.
In IIS 7, Site->Features View->Session state - Session State Mode Setting: In Proc and Cookie Setting->Time out = 180 minutes
In IIs 7, Site->Features View->ASP->Services->Session Properties->Time out = 03:00:00 hours
In IIS 7, Application Pools->Site->Advanced Setting->Process Model->Idle Time-out = 180 minutes.
Even after doing all these settings, timeout has not increased and still if the web site is idle for 20-30 mins. and user tries to access the link, it redirects to login page.
Additional Information:
Whenever it redirects to login page after idle of 20-30 mins., and if I check the event log on server, it says something like (I am not sure whether this error is related to this particular issue or not):
"Forms authentication failed for request. Reason: The ticket supplied has expired"
View 2 Replies
Nov 4, 2010
I am trying to run a website on iis7, it was working fine untill i tryed to install isapi rewrit on iis7. when i go to localhost i get the 404 message and when i type localhost/Default.aspx i get the default page but the css is not applyed to the page. i tryed to uninstall /install iis but the settings remain the same. how can i install iis with default settings.
i was following this instructions.
[URL]
View 3 Replies
Jan 19, 2010
We have many different clients, and each client can have multiple user accounts.Right now, we have user settings set up on the ASP project, and a WinForms application can see these settings, depending on which user logs into the winforms application. They are specific to the user. I want to make them specific to the client, so users can be in "groups" by their client, and all users in the group would see/update the same settings.
View 1 Replies
Feb 25, 2011
how the WCF, DAO and DTO layers communicate with each other? I would appreciate if someone can specify which layer comes first and then how it interacts with the next layer
View 1 Replies
Apr 4, 2011
I built a scraper for an ASP.NET site (specifically a Jenzabar course searching portlet) that would create a new session, load the first search page, then simulate a search by posting back the required fields. However, something changed, and I can't figure out what, and now I get HTTP 500 responses to everything. There are no new fields in the browser's POST data that I can see.I would ideally like to figure out how to fix my own scraper, but that is probably difficult to ask about on StackOverflow without including a ton of specific contex
View 4 Replies
