I am using the following code for URL RewritePath
[code]....
but its giving the following error
CurrentNotification = 'System.Web.HttpContext.Current.CurrentNotification' threw an exception of type 'System.PlatformNotSupportedException'
base {System.NotSupportedException} = {"This operation requires IIS integrated pipeline mode."}
}
}
I try to install IIS 7 on my Win 7, whenever I check . Net Extensibility . AsP .net under Application Development Feature and run http://localhost I get http error 500.24. An asp .net setting has been detected that does not apply in Integrated managed pipeLine mode
View 1 RepliesI am trying to export crystal report to pdf in asp.net, though the code is working well on localhost but on server I get error
HTTP Error 500.23 - Internal Server ErrorAn ASP.Net setting detected that does not apply in Integrated managed pipeline mode.
The crystal report is showing abnormal behaviors.I am using a CrystalReportViewer on which i have set the CrystalReportSource1 using the viewer Tasks.
The code on page load is :-
cn.Open();
DataSet ds = new DataSet();
string sql = "select * from Test";
OleDbDataAdapter da = new OleDbDataAdapter(sql, cn);
da.Fill(ds);
[Code].....
During the troubleshooting i encountered another unusual issue, where i tried a new crystal report with just simple report. That simple crystal report is not showing data & the toolbar images are not rendered. I googled on this but didn't found conclusive thing.
I have an existing ASP.NET application and there is a requirement in which i need to use ASP.NET MVC in that.
So altogether i need to mixing ASP.NET Webforms and ASP.NET MVC I am following an article [URL] I am done with all the steps. But its not working as expected.
[Code]....
When ever i add this to the web.config i am getting error. HTTP Error 500.22 - Internal Server Error An ASP.NET setting has been detected that does not apply in Integrated managed pipeline mode. ERROR CODE: 0x80070032 My OS is Vista Enterprise Edition.
I am looking for code to upload to a shared web host that will return whether or not the web site is running in integrated pipeline mode.
View 1 Replieswe are running a complex 64-bit ASP.NET 2.0 application on W2008 R2 Standard and stress tests done with VS2008 Team System have indicated that integrated pipeline mode is 30% slower than classic mode.
We have compared the application traces extensively and it appears that integrated mode is uniformly slower than classic. That is, there is no single point that causes delays in integrated mode.
This is quite the opposite to everything Microsoft says about the integrated pipeline, so it might be that there is something quite wrong with the configuration of the integrated mode or the server. But we have not found any settings that would have any effect on this. Some complaints that Sharepoint and reporting services are slower in integrated mode can be found, but our application does not use them so this is quite likely unrelated.
Is it possible to check if our code is executing in Integrated Pipeline Mode or not?
There are some ASP.NET class properties that only work in Integrated Pipeline Mode, and I want to avoid raising an exception if there is a way to test if our code is executing in that environment or not.
I am trying to get a asp.net 4.0 beta 2. website running that is working on my dev machine, but not when I published to my server. Where I get the HTTP 500.22 error when using the 4.0 as application pool and "Integrated" in "Managed Pipeline Mode".
View 1 Repliesam trying to write an HttpModule that will work in IIS7 with integrated pipeline mode AppPool. Within this module I need to access Session variables and to be able to capture the Session Start and End events. I have found a couple of articles on this topic that indicate the need to modify the behavior of the HttpHandler in PostAcquireRequestState to force the Session for the context to be initialized. The article I am using as a template is posted here:[URL]In my case I am getting the following error:
[NullReferenceException: Object reference not set to an instance of an object.] System.Web.PipelineModuleStepContainer.GetEventCount(RequestNotification notification, Boolean isPostEvent) +30 System.Web.PipelineStepManager.ResumeSteps(Exception error) +1112
System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) +113 System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +616
I believe that this error implies a problem with attempting to attach an event handler multiple times. I am aware that the modules Init function can be called more than once and have set a static initialization flag which ensures that I will only ever attach the event handler once.In the most condensed form my code is as follows:
public class HttpModule : IHttpModule, IRequiresSessionState
I'm working on a website with legacy Classic ASP pages (being converted to ASP.NET on an as needed basis) and new ASP.NET pages. Use of IIS 7 Integrated Pipeline has been very helpful with our configuration. For example, we were able to get forms authentication working auto-magically with the classic ASP pages simply by configuring the appropriate sections of the web.config file (i.e. no changes were required to the Classic ASP pages, for more info see this).
A colleague of mine believes that custom error pages, as specified in the web.config <customErrors> section, should also be auto-magically applied to the classic ASP pages, but for our website it only works for the ASP.NET pages. Nor have I been able to find any information describing the capability of applying custom error pages to Classic ASP with the IIS 7 integrated pipeline. Is it possible to apply custom error pages to Classic ASP pages per a web.config for an website running under IIS7 with integrated pipeline? If so, how?
When I run my website on local server asp.net routing works very well, but when I deploy it on a remote server ( asp 4.0 integrated pipeline ) it always returns with 404 error.
My url route is very simple, a stored procedure gets image's id and then displays it.
Global.asax:
[Code]....
Default.cs:
[Code]....
As the header says - ajax failed to load with pipeline set to integrated. When I turn it to classic it will work but not the routing !! I use asp.net 4.0 I register my route in global.asax
void
RegisterRoutes(System.Web.Routing.RouteCollectionroutes)
{routes.MapPageRoute("Article",
"{article}",
"~/ui/article/Show.aspx");}
Firstly there's a great overview of the IIS7 HTTP request lifecycle and various settings that affect performance here:
ASP.NET Thread Usage on IIS 7.0 and 6.0
Very specifically though, in dotNet 4 the defaults for maxConcurrentRequestsPerCPU and requestsQueueLimit are set to 5000. E.g. equivalent to: (in aspnet.config):[code]....
Seems to me that on a multi-CPU/core server the requestQueueLimit here will always be invoked well berfore the 'perCPU' limit. Thus, if a max of 5000 requests per CPU is what you actually want then I would expect that the requestQueueLimit needs to be increased to 5000 * CPUCount or just disabled altogether.
Is my interpretation correct? If so can I disable requestQueueLimit? (set it to zero?). The documentation on this setting doesn't appear to address this question (so maybe I'm missing something or misreading?)
** side note from the above article: The requestQueueLimit is poorly named. It actually limits the maximum number of requests that can be serviced by ASP.NET concurrently. This includes both requests that are queued and requests that are executing. If the "Requests Current" performance counter exceeds requestQueueLimit, new incoming requests will be rejected with a 503 status code)
Development environment: VS2008, Win XP
Iam working on a web form that incorporate ListView control with Ajax RoundCornerExtender.On my machine everything works fine, and looks okay. After uploading the page to the host server the ListView Item DIV with the round corners looks broken, I contacted the host server support and they asked me to check for version issues, I reinstalled the Ajax Control Toolkit as well as the .Net Framework 3.5 but still no change. When I change the ASP.NET version on the control panel from ver. 2.0 to ver. "2.0 Integrated pipeline" (they say its ver. 3.5) all the Ajax controls disapear from the page.
One more thing I noticed, when the ASP.NET ver. on control panel is set to "2.0 Integrated pipeline" (3.5) and I execute the following -
Response.Write(System.Environment.Version.ToString)
I get ver. 2.0.50727.4200 which is ASP.NET 2.0, why things looks okay on my machine and look different on host server ?
After some changes in web.config now IIS allows characters like ":" in URL but it makes some modifications. For example:
http://localhost/a///b => http://localhost/a/b (remove all slashes but one)
http://localhost/a => http://localhost/a/b (changes backslash with slash)
...
I want URL string from within a HttpHandler (I use Request.RawUrl) as it is without any change.
Our code relies on checking the Context.User.Identity value in the Global.asax Application AuthenticateRequest(...) method to retrieve some information about the logged in user. This works fine in classic mode but when I flip IIS to use the Integrated Pipeline "Context.User" comes back as null, but only intermittently.I have < authentication mode="Windows"> and only Windows Auth enabled in the Virtual Directory.
View 1 RepliesGenerally we should have control of our AppPools and be able to force the Managed Pipeline Mode. In my case I don't have control and would like to implement the code behind code a little differently based on the Managed Pipeline Mode (Integrated vs Classic). I just don't know how to detect this. Is there a simple way to do it from within the code behind page?
View 1 RepliesUltimately, we need to know if version 8.0 of the .net Sql ReportViewer control is compatible with IIS7 running in Integrated Pipeline Mode.Regardless of the countless forum posts and articles we've read and suggestions we've tried, we've been unable to get this combination to work.
We're in the process of upgrading our websites. We're having trouble with using the 8.0 version of the ReportViewer control with IIS 7 in Integrated mode. Below is a summary of our previous setup and what we're attempting to upgrade/change to.
Our previous setup:IIS 7 Classic Pipeline Mode.Net Framework 3.5 ReportViewer 8.0 Local Mode (control used within websites - no separate Sql Reporting Server)
Attempting to upgrade to IIS 7 Integrated Pipeline Mode.Net Framework 4.0 ReportViewer 8.0 Local Mode - NO CHANGE
Our sites are all working fine except for the use of the ReportViewer control. We're not ready to upgrade our reports to version 10.0 so we wanted to continue using version 8.0.
Since we're now using the Integrated pipeline mode of IIS7, we changed our root level web.config files of our websites to contain the handler for the report viewer in the system.webServer/handlers section instead of the system.web/httpHandlers section.We're receiving the following error when attempting to access a page that contains the ReportViewer control,
Microsoft.Reporting.WebForms.ReportViewerHandlerNotRegisteredException: The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Reserved.ReportViewerWebControl.axd" type
"Microsoft.Reporting.WebForms.HttpHandler,
Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a" /> to the system.web/httpHandlers section of the web.config file.We can't add the handler to the system.web/httpHandlers section of the web.config file since we're running in IIS7 Integrated Pipeline Mode.
We've tried both manually modifying the web.config file to include the handler in the system.webServer/handlers section as well as adding it via IIS. Both methods produce the same result.So, is version 8.0 of the ReportViewer control not compatible with IIS7 in Integrated Pipeline Mode? If it is compatible, what are we doing wrong? If it is not compatible, is version 9.0 of the ReportViewer control compatible?Here are the pertinent sections of our web.config files:
[Code]....
I fill a third-pard component variable in Global.Application_BeginRequest(). Everything is fine until I set IIS7 into the Integrated mode. In that case the method Application_BeginRequest() is not called (Application_Start is ok).May be some module is registered wrong?(I have found a same problem here on forum, but without a solution:[URL]
View 1 RepliesI just switched from Classic Mode to Integrated Mode and now HttpContext doesn't seem to exist in my ASP.NET application. I can't even add a Watch to HttpContext nor to HttpContext.Current.
I'm using FluorineFX where in the Web.config a HttpModule is defined. Apparently, in IIS7 Integrated Mode, these HttpModules need to be added to the Modules section in System.WebServer. I have done this, but now I'm having this HttpContext problem...
Code is in a simple service class being called by Flex (amf).
if (HttpContext.Current.User.Identity != null)
{
...
Web.Config (I don't know how to display this properly in Stack...):
<?xml version="1.0" encoding="utf-8" ?>
[Code]....
In IIS6 the scenario below is working perfectly.I have an HttpModule called URLRedirect which examines URLS and by using RegEx rewrites of applicable. An example is a URL "/doc47.pdf" gets redirected to docpdf.ashx?id=47 Then the docpdf.ashx used the id value and, using a database builds an application/pdf document and returns it. Since I need to validate that the user has access to the data, the first line of the ProcessRequest(HttpContext context) function is:if (context.User.Identity.IsAuthenticated) ..... This is where the problem occurs, but more details first.
On a webpage, access to which is restricted to lgged on users who meet certain criteria there is a link which allows the user to present the page as a PDF document. This is achieved by using javascript to open a popup window using the window.open("/doc47.pdf", ... ) function.This all works fine under IIS6 and under IIS7 if I change the mode to Classic. But, under IIS7 in integrated mode, the following happens.The line in doc.ashx described above raises an exception because context.User == null. But, and this is interesting, if instead of using the link that opens the popup window I instead type /doc.pdf?id=47 into the address bar, the PDF document displays correctly.So this indicates to me that the URLRedirect Module is somehow losing the logged on user information.
migrating my ASP.NET project from IIS 6 to IIS 7.5 I came across an issue with the Managed Pipeline Mode set to 'Integrated'.I have a Global.asax file in my web root to initialize some objects, gather data etc., however I am not able to hit breakpoints in the associated code-behind file (VS 2008). The code is executing very well (as I can tell from Eventlog), but I want to step into all that initializing there and need to have the debugger attached properly.Everything is working as expected in Classic pipeline mode. Since I'd like to benefit from Integrated Mode features in the future I wonder if I have to give up the ability to debug my Application start and error events...
View 1 RepliesI have created my first MVC application. I am using forms authenticataion. I have created a custom action filter MyAppAuthorizationFilter which inherits from AuthorizeFilter. Inside this filter I'm authenticating the user credentials by checking them against a database table (by overriding OnAuthorize method). If the user is not authenticated, I am redirecting the users to a login page (which is view of LoginController). I am using this filter agaginst my main controller so that all actions in this filter will execute only if the user is authenticated.
I do not have any problem when I use the asp.net development server (shipped with Visual Studio). But when I deploy the app to our IIS7 server, I can see the login screen when I access the default url, but after entering the credentials (both correct and incorrect) and posting back the Login page, it stays on the Login page (clears the pwd, but not the username). Its never getting redirected to the home screen or invalid login screen.
IIS 7 server has .net framework 3.5SP1, but no MVC. So I deployed the System.Web.Mvc dll in the bin folder.
Here's my Code (I've omitted the views and models as they are not needed here):
[MyAppAuthorizationFilter]
public class MainController : Controller
{
//
// GET: / [code]......
I implemented a simple autocomplete method using AJAX Autocomplete Extender through this video:http://www.asp.net/ajax/videos/how-do-i-use-the-aspnet-ajax-autocomplete-controlI am pulling from the web service for my data. Nothing major...But when I am running the application .NET is throwing me this error: Microsoft JScript runtime error: AjaxControlToolkit requires ASP.NET Ajax 4.0 scripts. Ensure the correct version of the scripts are referenced. If you are using an ASP.NET ScriptManager, switch to the ToolkitScriptManager in AjaxControlToolkit.dll.This is my code for the textbox that implements extender:
<asp:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server">
<Services>
<asp:ServiceReference Path="~/WebService1.asmx" />
</Services>
[code]...
trying to get the latest version of ACT I have (3.0.31106) working with a VS 2010 website, targetting .Net 4.0.
I have researched this and can't find a definitive answer.
I was using the AutoComplete Extender with no problems in VS2008 (ACT version 3.0.30512.1).
In creating this new VS2010 website I thought I ought to also check and get the latest version of the ACT.
Now, when running the new website I get the error other people get,
AjaxControlToolkit requires ASP.NET Ajax 4.0 scripts. Ensure the correct version of the scripts are referenced. If you are using an ASP.NET ScriptManager, switch to the AjaxScriptManager in System.Web.Ajax.dll, or use the ToolkitScriptManager in AjaxControlToolkit.dll.
What is the best approach here? I don't see the point ofusing the ToolkitScriptManager when the website already has the regular v4.0 ScriptManager.
I seem to have resolved this - fingers crossed - by downloading source version 49157 and then opening the .Net4 soultion file and building in VS2010. Then I got the AjaxControlToolkit.dll file from this project for use in my new website. This works fine now (for the autocomplete extender, at least).