When I run my website on local server asp.net routing works very well, but when I deploy it on a remote server ( asp 4.0 integrated pipeline ) it always returns with 404 error.
My url route is very simple, a stored procedure gets image's id and then displays it.
Global.asax:
[Code]....
Default.cs:
[Code]....
I have an existing ASP.NET application and there is a requirement in which i need to use ASP.NET MVC in that.
So altogether i need to mixing ASP.NET Webforms and ASP.NET MVC I am following an article [URL] I am done with all the steps. But its not working as expected.
[Code]....
When ever i add this to the web.config i am getting error. HTTP Error 500.22 - Internal Server Error An ASP.NET setting has been detected that does not apply in Integrated managed pipeline mode. ERROR CODE: 0x80070032 My OS is Vista Enterprise Edition.
I am using the following code for URL RewritePath
[code]....
but its giving the following error
CurrentNotification = 'System.Web.HttpContext.Current.CurrentNotification' threw an exception of type 'System.PlatformNotSupportedException'
base {System.NotSupportedException} = {"This operation requires IIS integrated pipeline mode."}
}
}
I'm working on a website with legacy Classic ASP pages (being converted to ASP.NET on an as needed basis) and new ASP.NET pages. Use of IIS 7 Integrated Pipeline has been very helpful with our configuration. For example, we were able to get forms authentication working auto-magically with the classic ASP pages simply by configuring the appropriate sections of the web.config file (i.e. no changes were required to the Classic ASP pages, for more info see this).
A colleague of mine believes that custom error pages, as specified in the web.config <customErrors> section, should also be auto-magically applied to the classic ASP pages, but for our website it only works for the ASP.NET pages. Nor have I been able to find any information describing the capability of applying custom error pages to Classic ASP with the IIS 7 integrated pipeline. Is it possible to apply custom error pages to Classic ASP pages per a web.config for an website running under IIS7 with integrated pipeline? If so, how?
I try to install IIS 7 on my Win 7, whenever I check . Net Extensibility . AsP .net under Application Development Feature and run http://localhost I get http error 500.24. An asp .net setting has been detected that does not apply in Integrated managed pipeLine mode
View 1 RepliesI am trying to export crystal report to pdf in asp.net, though the code is working well on localhost but on server I get error
HTTP Error 500.23 - Internal Server ErrorAn ASP.Net setting detected that does not apply in Integrated managed pipeline mode.
The crystal report is showing abnormal behaviors.I am using a CrystalReportViewer on which i have set the CrystalReportSource1 using the viewer Tasks.
The code on page load is :-
cn.Open();
DataSet ds = new DataSet();
string sql = "select * from Test";
OleDbDataAdapter da = new OleDbDataAdapter(sql, cn);
da.Fill(ds);
[Code].....
During the troubleshooting i encountered another unusual issue, where i tried a new crystal report with just simple report. That simple crystal report is not showing data & the toolbar images are not rendered. I googled on this but didn't found conclusive thing.
I get this error when I deploy the application on the remote server. This application works fine on my local machine though. It is built in MSVisual studio 2008.
View 2 RepliesI am trying to get a asp.net 4.0 beta 2. website running that is working on my dev machine, but not when I published to my server. Where I get the HTTP 500.22 error when using the 4.0 as application pool and "Integrated" in "Managed Pipeline Mode".
View 1 RepliesI have deployed ASP.net WebSite on Remote Server ....
It gives the Following Error when i tested by typing URL in IE ....
(The URL is college.desiresoftech.com)
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: Could not load file or assembly 'CrystalDecisions.ReportAppServer.ClientDoc, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.Source Error:
[Code] ....
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLMSoftwareMicrosoftFusion!EnableLog].
How can I solve it, i searched on net and the answer was server has no cr Runtime, install CR Runtime on server or Copy the .dll Files in Bin Folder, I downloaded the 10.5.3700.0 CR Runtime bt it is giving error when i try to install it...
As the header says - ajax failed to load with pipeline set to integrated. When I turn it to classic it will work but not the routing !! I use asp.net 4.0 I register my route in global.asax
void
RegisterRoutes(System.Web.Routing.RouteCollectionroutes)
{routes.MapPageRoute("Article",
"{article}",
"~/ui/article/Show.aspx");}
I am looking for code to upload to a shared web host that will return whether or not the web site is running in integrated pipeline mode.
View 1 Replieswe are running a complex 64-bit ASP.NET 2.0 application on W2008 R2 Standard and stress tests done with VS2008 Team System have indicated that integrated pipeline mode is 30% slower than classic mode.
We have compared the application traces extensively and it appears that integrated mode is uniformly slower than classic. That is, there is no single point that causes delays in integrated mode.
This is quite the opposite to everything Microsoft says about the integrated pipeline, so it might be that there is something quite wrong with the configuration of the integrated mode or the server. But we have not found any settings that would have any effect on this. Some complaints that Sharepoint and reporting services are slower in integrated mode can be found, but our application does not use them so this is quite likely unrelated.
Is it possible to check if our code is executing in Integrated Pipeline Mode or not?
There are some ASP.NET class properties that only work in Integrated Pipeline Mode, and I want to avoid raising an exception if there is a way to test if our code is executing in that environment or not.
Firstly there's a great overview of the IIS7 HTTP request lifecycle and various settings that affect performance here:
ASP.NET Thread Usage on IIS 7.0 and 6.0
Very specifically though, in dotNet 4 the defaults for maxConcurrentRequestsPerCPU and requestsQueueLimit are set to 5000. E.g. equivalent to: (in aspnet.config):[code]....
Seems to me that on a multi-CPU/core server the requestQueueLimit here will always be invoked well berfore the 'perCPU' limit. Thus, if a max of 5000 requests per CPU is what you actually want then I would expect that the requestQueueLimit needs to be increased to 5000 * CPUCount or just disabled altogether.
Is my interpretation correct? If so can I disable requestQueueLimit? (set it to zero?). The documentation on this setting doesn't appear to address this question (so maybe I'm missing something or misreading?)
** side note from the above article: The requestQueueLimit is poorly named. It actually limits the maximum number of requests that can be serviced by ASP.NET concurrently. This includes both requests that are queued and requests that are executing. If the "Requests Current" performance counter exceeds requestQueueLimit, new incoming requests will be rejected with a 503 status code)
am trying to write an HttpModule that will work in IIS7 with integrated pipeline mode AppPool. Within this module I need to access Session variables and to be able to capture the Session Start and End events. I have found a couple of articles on this topic that indicate the need to modify the behavior of the HttpHandler in PostAcquireRequestState to force the Session for the context to be initialized. The article I am using as a template is posted here:[URL]In my case I am getting the following error:
[NullReferenceException: Object reference not set to an instance of an object.] System.Web.PipelineModuleStepContainer.GetEventCount(RequestNotification notification, Boolean isPostEvent) +30 System.Web.PipelineStepManager.ResumeSteps(Exception error) +1112
System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) +113 System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +616
I believe that this error implies a problem with attempting to attach an event handler multiple times. I am aware that the modules Init function can be called more than once and have set a static initialization flag which ensures that I will only ever attach the event handler once.In the most condensed form my code is as follows:
public class HttpModule : IHttpModule, IRequiresSessionState
I have developed web application i need to deploy it on remote server.i am using asp.net 3.5 ,c# 3.0 and visual studio 2008,sql server 2005.using visual studio 2008 how i can make msi file to deploy application on server
View 5 RepliesDevelopment environment: VS2008, Win XP
Iam working on a web form that incorporate ListView control with Ajax RoundCornerExtender.On my machine everything works fine, and looks okay. After uploading the page to the host server the ListView Item DIV with the round corners looks broken, I contacted the host server support and they asked me to check for version issues, I reinstalled the Ajax Control Toolkit as well as the .Net Framework 3.5 but still no change. When I change the ASP.NET version on the control panel from ver. 2.0 to ver. "2.0 Integrated pipeline" (they say its ver. 3.5) all the Ajax controls disapear from the page.
One more thing I noticed, when the ASP.NET ver. on control panel is set to "2.0 Integrated pipeline" (3.5) and I execute the following -
Response.Write(System.Environment.Version.ToString)
I get ver. 2.0.50727.4200 which is ASP.NET 2.0, why things looks okay on my machine and look different on host server ?
I am new to the web development.I have built my website in visual studio 2008 using Sql server 2008 as backend.Now I want to know the whole process of deploying the website in some web domains and as well as my database to some database domain.I didn't purchase any domain till now.I want to know about web hosting as well.
View 2 RepliesI need to deploy a website from the SVN to different servers all within our own network. The code is currently not complied but probably will be in the future.
First the site would need to be deployed to the development server for the developers to test.
Once the Developer signs off it would be deployed to the staging server for the testers.
Once final sign off was given it would be deployed to a server farm, two live servers.
Each server has a couple of settings in the web.config to that are different; expect the two live server of course. I would like to use templates, the way the Ruby on Rails world does, seems like an elegant solution to multiple web.config files.
I also need to create a list/report of the files that were changed and what the change was since the last deployment.
I thinking of writing a script that will do the following
1. Take args for server to deploy to, and revision
2. Export a copy of the source to a directory with svn export -r <deploy revision>
3. Delete the web.config file
4. Use ttree (a template tool [URL]) to create the correct web.config
5. Create a list of file changes with svn list -r <deploy revision>:<current server revision>
6. Stores the <current server revision> of the website for when the script is run next time
I prefer to use tools that are already available rather than re-invent the wheel. Unfortunately I don't think MSDeploy will do what I need, but I'm happy to use it, or anything else, if it will do what I need it to. Does anyone know of any tools that are up to the task or is the script my only option?
how to deploy ASP.net Website having SQL Server on IIS server on Different Computer..
View 2 RepliesI have amazon cloud aws, i am developing a website in asp, i have remote RDP access to my server..
So i have not installed postgreSQL etc.. but i am unable to connect to that database.. and when i install and run on my local system, it connect.
how to deploy an ASP.NET2.0 website on Windows server 2003 & IIS 6.0.
I tried to follow these steps but I get the message "Internet Explorer cannot display the webpage".
1. Create a new website in IIS with a host header.
2. Browse to the directory where the asp.net website is and setting it as home directory.
3. Stopping the website and starting it.
I am using Visual studio 2005 to develop my Asp.net website.
How to deploy Asp.net web site in IIS 6.0 my Environment is windows server 2003 64 bit and port ruining 81.
View 1 Replieswhy I'm getting this error? I just re-created (not migrated) my app that was in ASP.NET 1.1 to ASP.NET 2.0. Whole app works perfectly. The only problem I'm getting with this piece of code for the Web Services. I'm running both versions at the same time side-by-side and it works fine in 1.1 and doesn't work in 2.0.
URLName = Context.Request.Url.Segments
URLName0 = URLName(0)
URLName1 = URLName(1)
URLName2 = URLName(2)
URLHost = Request.UserHostName
URLStr = "http://" & URLHost & URLName0 & URLName1 &
"SomePage.aspx?" & "SectionID=" & SectionID
' Create a 'WebRequest' object with the specified url
Dim myWebRequest As WebRequest =
CType(WebRequest.Create(URLStr), WebRequest)
' Send the 'WebRequest' and wait for response.
Dim myWebResponse As WebResponse =
CType(myWebRequest.GetResponse(), WebResponse)
Bam! Error! The remote server returned an error: (500) Internal Server Error.
In IIS we have a virtual directory (named as "Documents") with in application virtual directory (named as "Reference") that points to an shared folder.All the files with in the "Documents" folder are listed and opened by the user (by clicking on the file name) with in the application
"Reference" application runs under an application pool. This application pool is configured to run with an Active directory account. This AD account has been granted write and modify permissions on the shared folder that contains the html files.
When user tries to open any of the html file located with in the shared location from the application following error is thrown.
System.Net.WebException: The remote server returned an error: (500) Internal Server Error
I tried to browse to the location manually and I can see the required files there.
These files where accessible from our application until yesterday. But we started encountering this error from today.
Is there any IIS settings that needs to be modified?