I assigned a int value to to one of the cells in an array and then output that value to a label. The label correctly displays that value however when I try to get that value later in a different method the cell returns a 0. I think that the problem is that I shouldn't of made the array on the outside of a method; I checked the code that deals with the array about 3 times and it all seems fine. how I should create, get, and set this array. I was setting the value of the cell like this
arrayForXps[0,1] =Convert.ToInt32(ddl_att_desLvl.SelectedValue); //This value is never zero.
I was getting the value like this Label.Text = Convert.ToString(arrayForXps[0,1]);
I need to know what would be the best choice of array to use given the following specifications. This array's size will be predermined upon the loading of the appication. All I want to do is be able to add values to this array and replace preexisting array items with new values without the array changing size. Someone suggested that I use a Dictionary Array Object? I would appreciate any suggestions.
Iam getting an array of list from database to client side(javascript array). Now my aim to place those values in a div one by one and that div should attach to the textbox similar to Autocomplete extender.
The line "Return strLoc" below shows the green line underneath strLoc with the message "Variable 'strLoc' used before it has been assigned a value." In fact, it returns the value just fine to the calling module, so I'm wondering why it's giving this message and how to prevent it.
I am trying to access a user's login credentials to find out if they are an admin user or not. This way I can assign session variables to them and show certain aspects of the web page that other users won't see. I unfortunately keep getting this error when trying to dim a variable to assign the values too.
Variable Nuid is used before being assigned a value. Variable AdminUser is used before being assigned a value.
Code: Protected Sub checkAdmin_Click(sender As Object, e As EventArgs) Handles checkAdmin.Click Dim strNuid As String = Request.Form("Nuid") Dim cnString As String = ConfigurationManager.ConnectionStrings("snfTimeSystemConnectionString").ToString() Try Using cn As SqlConnection = New SqlConnection() cn.ConnectionString = cnString
I was working on my homework, making a website obiously, but I have a small problem with the griedview. I wanted to add a button on the end of the row, but I receive some error notifications and warnings too...
SeverityCodeDescriptionProjectFileLineSuppression State ErrorBC30518Overload resolution failed because no accessible 'Add' can be called with these arguments: 'Public Overloads Sub Add(column As DataColumn)': Value of type 'ButtonField' cannot be converted to 'DataColumn'. 'Public Overloads Function Add(columnName As String) As DataColumn': Value of type 'ButtonField' cannot be converted to 'String'.GIPH:GIPSearch.aspx.vb31Active
I'm pretty new to silverlight and asp.net but I have a strong background in c#. I am currently developing a c# asp.net application with silverlight elements. I was wondering if it was possible to have a user say click on an image that has a certain value associated with it and have that value access from a c# variable held outside the silverlight application.
I'm messing with setting some values in javascript and I assumed my input box would have the same id as my original asp.net textbox that created it... it doesn't.
Asp.net added gridview1_ctl02_ to the beginning of all my id's. I see that 'gridview1' is coming from my gridview ID but what is ctl02 and can I assume that will always be what's added or is there a better way of getting this object sent to my javascript?
On Default.aspx.vb page under on_load sub I'm setting a value on Session() but, if I try to access the same value on Default.aspx, it shows as empty. Here is the code:
I'm fairly new to ASP.net development as may have been noticed by some of my other posts and so here goes another one.I have a web page in which I allow users to enter data that will be used to populate a database and then graph data based on the information that was saved in the database. I have 10 sets of criteria that the user can enter and as they enter values for each individual set, I make sure all the parameters are filled in and set a variable called blnParm1, blnParm2, blnParm3, etc. Anyway, as each DropDownList box fires off an event the values of my blnParm variables is reset because each time the event is fired the page is PostBack therefore my variables are redeclared. I know the page is being PostBack because each of the DropDownList boxes have AutoPostBack set to true. I had to do this so that I could get the OnSelectedIndexChanged event to fire for each of the DropDownList boxes. So, how do I preserve my variables through this PostBack or how do I get the events to trigger without calling AutoPostBack?
Some more info, my variables are declared globally in my aspx.cs file as private bool. The code is working like it should as far as populating drop downs dynamically based on other data input by the user, the controls all have their values preserved as the page is PostBack.
I am stuck with a problem. I have a product page which consits of 2 content place holders. in one of them there is gridview bounded with produtcs and in the other there will be dynamically generated checkboxes used to filter the grid view. upon clicking a checkbox the gridview is filtered showing the products that match the checkbox criteria AND the checkboxes must also be filtered so that checkboxes which were available for previous products should be deleted.
I am loading the checkboxes in the page load. When I enable viewstate for the checkboxes I get the following error:
Failed to load viewstate. The control tree into which viewstate is being loaded must match the control tree that was used to save viewstate during the previous request. For example, when adding controls dynamically, the controls added during a post-back must match the type and position of the controls added during the initial request.
when I disable the viewstate of the checkboxes I get the following error:
An error has occurred because a control with id 'ctl00$refineProducts$ctl04' could not be located or a different control is assigned to the same ID after postback. If the ID is not assigned, explicitly set the ID property of controls that raise postback events to avoid this error.
I have a publice variable to be used in the same webpage. when the user click on button 1, it does some process and assign a value to my public variable. After that, the user can click on button 2 which needs the public variable value to function. However I see the value of the public variable is 0 when I click on button 2.
xamount is receiving this message on the last line. The session is being set in the previous page. Is there a way to resolve the message or should I just use a previous page postback
I am getting an exception on a linq to sql query:The null value cannot be assigned to a member with type System.DateTime which is a non-nullable value type.
I am having an odd situation with a dynamic image button. This button is part of a dynamically built asp table which lives in a repeater. Not sure if that complicates things or not, but here's the issue. Since the buttons are dynamically built, if I let asp.net handle the ids I get a crash on postback. Not entirely sure why, but If I set the id in code, I don't get the duplicate id error but I don't get the event fired either. Here is the code building the button:
[Code]....
With this code the IB_Validate_Click never fires. If I comment out the IB_Validate.ID line, the event fires. But, as mentioned above, I have an id clash on a postback. Any ideas why the IB_Validate_Click doesn't fire on this button if the id is set?
What I don't quite understand is how the value for ObjectRecordID gets assigned. I understand by looking at the code that AlerId is getting assigned to ObjectRecordID but how is ((Alert)Container.DataItem).AlertId grabbing its value?
I m developing a Web Based Inventory System Using ASP.NET which have a menu containing 16 options overall. I have created a menu using <ul> <li> tags. When I open my project in browser, it shows all the 16 options even i logged in with Administrator or Purchaser or Seller or Accountant etc.
I have a form to assign the Form Access Rights to every user. For example Administrator can use all the options but Seller can use only 3 options (Sales / Sales Return / Today's Sale Report). Purchaser can use 3 options (Purchase / Purchase Returns / Today's Purchase Report) Accountant can use 2 options (Payment / Receipts) etc.How can i show the menus to the users according to the rights assigned.
I got the following error when i tried to insert a new record after the run my project, so what does this error indicates?
"{"Cannot insert explicit value for identity column in table 'Articles' when IDENTITY_INSERT is set to OFF."} System.Exception {System.Data.SqlClient.SqlException}
In HomeController i have set the view data values (ViewData["message"] = "World!";)..
After assigned value it returned to Index page to show. In index page i used code <%= ViewData["message"] %>.. But it didnt display anything.. What is wrong in my code..
Im using a ValidatorCallOutExtender for validate a ASP:textbox, but I have the problem when the scroll is at the top of the page, everything works fine, but if the scroll is at the bottom the validatorcallout is displayed above the textbox which is assigned. I tried adding a CSS mentioned in several places, a script that runs when the page is loaded, so as to put the SetFocusOnError = "true" but nothing has worked, the error occurs in all browsers.
When i click on the page that represents a controller the following error was displayed:-
"The null value cannot be assigned to a member with type System.Int32 which is a non-nullable value type"
On this link of code
var articleapproval = articletyperepository.FindAllArticlesRequireMyApproval().ToList(); while the FindAllArticlesRequireMyApproval execute the following LINQ statement :- var articleapproval= articletyperepository.FindAllArticlesRequireMyApproval().ToList();
where this methods calls the following LINQ statement:-