Web Forms :: Error - Control Can't Locate Or Assigned To Same Id
Dec 20, 2010
I am stuck with a problem. I have a product page which consits of 2 content place holders. in one of them there is gridview bounded with produtcs and in the other there will be dynamically generated checkboxes used to filter the grid view. upon clicking a checkbox the gridview is filtered showing the products that match the checkbox criteria AND the checkboxes must also be filtered so that checkboxes which were available for previous products should be deleted.
I am loading the checkboxes in the page load. When I enable viewstate for the checkboxes I get the following error:
Failed to load viewstate. The control tree into which viewstate is being loaded must match the control tree that was used to save viewstate during the previous request. For example, when adding controls dynamically, the controls added during a post-back must match the type and position of the controls added during the initial request.
when I disable the viewstate of the checkboxes I get the following error:
An error has occurred because a control with id 'ctl00$refineProducts$ctl04' could not be located or a different control is assigned to the same ID after postback. If the ID is not assigned, explicitly set the ID property of controls that raise postback events to avoid this error.
Code for my page_load event:
[Code]....
View 7 Replies
Similar Messages:
Jun 25, 2010
For example:
[Code]....
When I run this the error is 'Invalid column name 'assigned'.'Yet if I load up Microsoft sql server management studio and run the query against the same db:
[Code]....
I get the data I was expecting and the column does exist?
View 2 Replies
Jan 11, 2010
Is there any solution for this issue.
http://forums.asp.net/t/1006536.aspx
View 3 Replies
Nov 21, 2010
I need to access a TextBox control inlistview. I have tried the following code behind but I don't retrieve the correct textbox. A snippet of the code is as follows:
<asp:ListView ID="CurrentAlertListView1" runat="server" ItemPlaceholderID="itemPlaceholder"
EnableViewState="false" EnableModelValidation="True" OnSelectedIndexChanged="CurrentAlertListView1_SelectedIndexChanged"
[code]...
View 1 Replies
Nov 13, 2010
I've got a detailsview control on a page. The table that it interacts with has a DateTime column in it. This column is nullable, and a lot of the records have null for that value. In the EditItemTemplate I've got a calendar control. When I try to put the DetailsView into edit mode, I get the following error message:
System.InvalidCastException was unhandled by user code
Message=Specified cast is not valid.
Source=App_Web_srpmlyjd
StackTrace:
at ASP.entries_aspx.__DataBinding__control44(Object sender, EventArgs e) in c:inetpubwwwrootMediaLibraryEntries.aspx:line 103
at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding)
at System.Web.UI.Control.DataBindChildren()
I am convinced that the problem is the null values in the DateTime column of the table. I've done some web searches on this, and some have suggested placing some dummy values into that column, but that seems more like a kludge, rather than a solution. How do I keep nulls in the table, and yet not have that preceeding error come up when a user tries to edit the selected record?
View 1 Replies
Dec 26, 2010
I got the following error when i tried to insert a new record after the run my project, so what does this error indicates?
"{"Cannot insert explicit value for identity column in table 'Articles' when IDENTITY_INSERT is set to OFF."} System.Exception {System.Data.SqlClient.SqlException}
"
View 4 Replies
Jul 15, 2010
I am looking at somebody else's code and in it there is a user control:
<UserControl:Comments ID="Comments1" runat="server" ObjectID="4" ObjectRecordID='<%#((Alert)Container.DataItem).AlertId %>'></UserControl:Comments>
What I don't quite understand is how the value for ObjectRecordID gets assigned. I
understand by looking at the code that AlerId is getting assigned to ObjectRecordID
but how is ((Alert)Container.DataItem).AlertId grabbing its value?
View 2 Replies
Apr 28, 2010
I am using following code.Its giving error:"No value given for one or more required parameters.".I am unable locate.
protected int _ExhibitionId;
_ExhibitionId=txtExbId.Text;
protected void GetVenueId()
{
try
{
OleDbConnection conn = new OleDbConnection(con);
string SqlString = "Select VenueId from ExhibitionMaster where ExhibitionId = ?";
using (OleDbCommand cmd = new OleDbCommand(SqlString, conn))
{
cmd.CommandType = CommandType.Text;
cmd.Parameters.AddWithValue("ExhibitionId", _ExhibitionId);
conn.Open();
using (OleDbDataReader reader = cmd.ExecuteReader())
{
while (reader.Read())
{
_VenueId = Convert.ToInt32(reader["VenueId"].ToString());
}
}
conn.Close();
}
}
catch { }
View 2 Replies
Sep 27, 2010
how to set text property assigned to the control created dynamically usiong reflection?
Type type = Type.GetType(strFullName);
object instance = Activator.CreateInstance(type);
ctrlTemp = (Control)instance;
ctrlTemp.ID = "Hello";
ctrlTemp.Text???
Panel1.Controls.Add(ctrlTemp);
View 2 Replies
Jun 7, 2010
I need to get a perticular word from remote website.its a number and it is changable. but it cant be a char it must br a number .i just wants to locate that number.
Actually i have a project,in which user have to insert the url of his video and it could be on any website which allows to host videos(youtube,metacafe,etc...).now when user enters the link and press the button on that page he will able to see number of views of his video.
View 3 Replies
Nov 22, 2010
Create value for Gridview2
New Data.SqlClient.SqlConnection("ConnectionString")
Dim MSQL As New Data.SqlClient.SqlDataAdapter("SELECT Code, [Description] FROM [Dimension] where [Code] = '" & selrow.Cells(1).Text & "' ORDER BY [Line] ASC ", conLathv)
Dim ds As New Data.DataSet()
MSQL.Fill(ds)
GridView2.DataSource = ds
GridView2.DataBind()
<asp:GridView ID="GridView2" runat="server" AutoGenerateColumns ="False">
<Columns >
<asp:TemplateField HeaderText ="Code">
<ItemTemplate >
<asp:TextBox runat="server" text= '<%# Eval("Code") %>' ID=TextBox6"
></asp:TextBox>
</ItemTemplate>
</asp:TemplateField >
<asp:TemplateField HeaderText ="Description">
<ItemTemplate >
<asp:TextBox runat="server" text= '<%# Eval("Description") %>' ID="TextBox5"
></asp:TextBox>
</ItemTemplate>
</asp:TemplateField>
</Columns >
</asp:GridView >
How can i get specific data from textbox6 or texbox5. Gridview2 have 2 cels and 10 rows.
View 3 Replies
Feb 19, 2010
I am declaring a list in my class, populating the list in page load and using the list in various methods in this class. But, I get this error at every instance where I use this list in the methods. Error: System.NullReferenceException: Object reference not set to an instance of an object.
public partial class ViewBG1 : HealthServicePage
View 3 Replies
Nov 27, 2010
In the database one number like a 91-9685748596 and, 2nd number like 9122-9685748596 and another one is 9685748596 .when we are try to formate it using substring function it all are may be9685748596,9685748596,9685748596.Mobile number is assigned as a primary key.so its showing error "Primary key violation".We can not the remove primary key also and there are 50 lack data in our database.
View 6 Replies
Apr 14, 2010
I have a label control inside of repeater and I can't seem to get FindControl to locate the label inside of the repeater or even the repeater itself. I'm not sure what I'm doing wrong here. OnItemDataBound is firing because "hello1" is being written but if I put anything inside of the For Next loop of rptMarketFundamentals, nothing is run inside of it.
<asp:Repeater id="rptMarketFundmentals" runat="server" DataSourceID="dsMarketFundamentals" OnItemDataBound="rptMarketFundamentals_ItemDataBound">
<asp:Label ID="lblOwnershipCategory" runat="server" Text='<%# Eval("OwnershipCategory") %>' />
</asp:Repeater>
Sub rptMarketFundamentals_ItemDataBound(ByVal Sender As Object, ByVal e As RepeaterItemEventArgs)
Response.Write("hello1") 'this works
Dim dataItem As RepeaterItem
For Each dataItem In rptMarketFundmentals.Items
Response.Write("hello2") 'this does not work
Dim lblOwnershipCategory As Label = CType(dataItem.FindControl("lblOwnershipCategory"), Label)
If lblOwnershipCategory.Text.ToLower = "family firm" Then blOwnershipCategory.CssClass = "highlight"
End If
Next
End Sub
View 2 Replies
Feb 21, 2010
I am trying to set the readonly property for the columns of a latebound gridview.
My data source is a select SPROC which returns a lookup group of records.
The gridview control is bound when the page loads.
The gridview has an edit control and I would like to allow the editing of specific records.
I cannot find the readonly property of the row columns to set.
I tried this :
[code]...
View 2 Replies
Mar 2, 2010
The line "Return strLoc" below shows the green line underneath strLoc with the message "Variable 'strLoc' used before it has been assigned a value." In fact, it returns the value just fine to the calling module, so I'm wondering why it's giving this message and how to prevent it.
[Code]....
View 2 Replies
Aug 26, 2010
I'm messing with setting some values in javascript and I assumed my input box would have the same id as my original asp.net textbox that created it... it doesn't.
Asp.net added gridview1_ctl02_ to the beginning of all my id's. I see that 'gridview1' is coming from my gridview ID but what is ctl02 and can I assume that will always be what's added or is there a better way of getting this object sent to my javascript?
View 14 Replies
Jul 18, 2010
[Code]....
I have a publice variable to be used in the same webpage. when the user click on button 1, it does some process and assign a value to my public variable. After that, the user can click on button 2 which needs the public variable value to function. However I see the value of the public variable is 0 when I click on button 2.
View 2 Replies
Sep 10, 2010
xamount is receiving this message on the last line. The session is being set in the previous page. Is there a way to resolve the message or should I just use a previous page postback
[Code]....
View 9 Replies
Mar 3, 2010
I am having an odd situation with a dynamic image button. This button is part of a dynamically built asp table which lives in a repeater. Not sure if that complicates things or not, but here's the issue. Since the buttons are dynamically built, if I let asp.net handle the ids I get a crash on postback. Not entirely sure why, but If I set the id in code, I don't get the duplicate id error but I don't get the event fired either. Here is the code building the button:
[Code]....
With this code the IB_Validate_Click never fires. If I comment out the IB_Validate.ID line, the event fires. But, as mentioned above, I have an id clash on a postback. Any ideas why the IB_Validate_Click doesn't fire on this button if the id is set?
View 1 Replies
Nov 4, 2010
I have few master pages on my site in this hierarchy:
global.master -> middle.master, middle2.master etc... -> web pages(.aspx)
On the web pages code I'm trying to do:
Master.Master.method();
In purpose to get to the method that locate on global.master. But I get this errors:
Error 26 The type 'ASP.global_master' is defined in an assembly that is not referenced.
You must add areference to assembly 'App_Web__jpncjmo, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'.
Error 27 'ASP.global_master' does not contain a definition for 'method' and no extension method 'method' accepting a first argument of type
'ASP.global_master' could be found
(are you missing a using directive or an assembly reference?)
View 1 Replies
Mar 11, 2010
This is my first time stepping into the wonderful world of SSL. I am working on a project which forces the HTTPS protocol/ Url Scheme for certain parts of the site. I mananged to get that working fine.
<br/>
There is another part of the project where I pull binary image data from a database, and then write/render the image onto the browser window. <b>I found that since I converted the site to SSL, the rendering no longer works</b>. I am now working under the believe that I must open my a System.Net.Security.SSLStream in order to stream the bytes to the Response.
<br/>I'm at the point where I am writing the SSLStream, but there is a major roadblock. I don't know how to
programmatically locate my X509Certificate so that I can authenticate the SSLStream. To make this problem a little more challenging, I am working with a somewhat-unpopular shared hosting provider, who does not give me access to the certificate name - which probably is not a big deal. I am guessing I'm just going about this problem the wrong way. <br/>
View 2 Replies
Mar 24, 2010
I am trying to locate a label on a content page from within User Control(ascx)
Page p = this.Page;
//this line causes application to unload with no exception
ContentPlaceHolder cp = (ContentPlaceHolder)p.Master.FindControl("Content2");
Label label = (Label)cp.FindControl("SomeLabel");
It just unloads itself with no exception mesage. Why does it happen?
View 1 Replies
Aug 3, 2010
I would like to locate the new record in a paged list after the record is inserted to the database. Say there are 10 pages of records. Each page is size of 20 records and sorted by last namez of people. I add a new record with last name Murray. Using MVC, how do I position to the page where Murray is after a post back? The controller's New action return to Index view, but it always return to the first page.
1. How do I make the Index method or some other method to go to page where newly inserted record is.?
2. How do I make the browser scroll to the row where the newly inserted record is in a NON-paged list?
View 2 Replies
Apr 8, 2010
I am sending mails (in asp.net ,c#), having a template in text file (.txt) like below
User Name :<User Name>
Address : <Address>.
I used to replace the words within the angle brackets in the text file using the below code
StreamReader sr;
sr = File.OpenText(HttpContext.Current.Server.MapPath(txt));
copy = sr.ReadToEnd();[code]....
Now I have a new problem,the user will be adding new words within an angle, say for eg, they will be adding <Salary>.
In that case i have to read out and find the word <Salary>.
In other words, I have to find all the words, that are located with the angle brackets (<>).
View 3 Replies
