Web Forms :: Dynamic Image Button Not Firing When Id Assigned
Mar 3, 2010
I am having an odd situation with a dynamic image button. This button is part of a dynamically built asp table which lives in a repeater. Not sure if that complicates things or not, but here's the issue. Since the buttons are dynamically built, if I let asp.net handle the ids I get a crash on postback. Not entirely sure why, but If I set the id in code, I don't get the duplicate id error but I don't get the event fired either. Here is the code building the button:
[Code]....
With this code the IB_Validate_Click never fires. If I comment out the IB_Validate.ID line, the event fires. But, as mentioned above, I have an id clash on a postback. Any ideas why the IB_Validate_Click doesn't fire on this button if the id is set?
View 1 Replies
Similar Messages:
Apr 9, 2014
On grid RowDataBound based on some condition i've added imagebutton dynamically. parallelly i want to add event for this button click. here is my code snippet.
protected void GV3_RowDataBound(object sender, GridViewRowEventArgs e)
{
if (e.Row.RowType == DataControlRowType.DataRow)
{
TableCell cell = new TableCell();
ImageButton bttn = new ImageButton();
[Code]...
That message popup box comes, but i'm unable to catch that click event. while click on a row i want to delete that row, so want to create event dynamically. for that i've used this following dynamic click event
bttn.Click += new ImageClickEventHandler(b_Click);
private void b_Click(object sender, EventArgs e)
{
//delete record
}
but this above code also not working.
View 1 Replies
Feb 28, 2010
I have a GridView control bound to an AccessDataSource. After selecting a row I'm creating a table inside the selected row. I'm adding Buttons to this table. Their Click event never gets fired. I read about recreating the buttons and stuff, but still no luck solving the issue.
[code]....
View 1 Replies
Feb 5, 2010
[code]....
Dynamic image button does not work
View 7 Replies
Jan 8, 2010
i am using VWD(visual web developer 2008) and DOTNET 3.5
i have a page on which i dynamically add multiple datalist controls on the oninit event of my page , on postabck i again add all these datalist controls to the page on oninit event
the template for all the datalist controls is defined using the ITemplate interface, the template defined for each datalist control contains a button which has a event handler attached to onclick event.
the problem is first time i click the button on postback i add the multiple datalist controls , the event gets fired which modifies the datatable i am using to generate my datalist controls and the datalist controls with the modified data show on the page but the second time a user clicks the button inside datalist the event does not get fired.
View 3 Replies
Nov 29, 2010
I'm sure the answer to this problem is very simple, however, I've been racking my brain on this one. I am adding rows/cells to a table dynamically.
[Code]....
When I check or uncheck the box, it fires the page load and not 'MarkFormCompleted'. No matter what I do, I can't get it to fire 'MarkFormCompleted'.
View 9 Replies
Jul 28, 2010
I am trying to create an HTML button that can use a C# server side delete function. since I don't know how many results I will have at the page, the control is created dynamically when the end user searches for current Messages:
CmsContactUsContent += string.Format(" "<input type='image' value='delete' id='del{8}' runat='server' onClick='DeleteItem' img src='/MaromyDotNet/img/AdminIcons/note.png' style='width:16px;'/>" + [code].....
View 3 Replies
Aug 12, 2012
Problem : I have Added One Link button to the above Table.. Click Event for That Link Button Is not Firing Now. when i click on link button of table event is not firing at all.
LinkButton lbs = new LinkButton();
lbs.Text = "Submit";
lbs.ID = "lnksubmit"; lbs.Attributes.Add("runat", "server");
lbs.Click+=new EventHandler(lbs_Click); tcsp.Controls.Add(lbs);
tr3.Cells.Add(tcsp);
tabspilit.Rows.Add(tr2);
void lbs_Click(object sender, EventArgs e)
{
throw new NotImplementedException();
}
View 1 Replies
Aug 10, 2010
I have a dynamic Table which contain 8 rows and 8 Colums
Table t = new Table();
TableRow rr = new TableRow();
TableCell cc = new TableCell();
and in the each Cell CC I add a dynamic Button(Or Linkbtn)
LinkButton LB1 = new LinkButton();
LB1.Text = "AM";
LB1.ID ="Link1";
cc.Controls.Add(LB1);
rr.Cells.Add(cc);
LB1.Click += new EventHandler(LB1_Click);
t.Rows.Add(rr);
i have a table with 8 rows , 8 colums and each cell contain a LinkButton (which diffrent in IDs) I want to add Lable in the same cell of this LinkBtn(LB1) which it clicked but I cann't What shoud I write here?
void LB1_Click(object sender, EventArgs e)
{
// throw new NotImplementedException();
}
View 1 Replies
Mar 22, 2010
I am creating an array of checkboxes :
1. chkresponse = new System.Web.UI.WebControls.CheckBox[cnumber + 1];
for (int
i = 0; i < cnumber + 1; i++){
chkresponse[i] = new System.Web.UI.WebControls.CheckBox();
chkresponse[i].CheckedChanged +=
new EventHandler(chkresponse_CheckedChanged);
chkresponse[i].AutoPostBack =true;
}
2. thereafter adding them to a panel
Panel1.Controls.Add(chkresponse[n]);
3. then added the checkedchanged event:
public
void chkresponse_CheckedChanged(Object sender, System.EventArgs e)
{Label1.Text = "response";}
but the event is never fired. the panel is insdie an updatepanel.
View 5 Replies
Jun 1, 2010
I'm no expert with Image controls, or dynamically adding anything, but I seem to have some problem when dynamically adding image controls
When the page loads the images are "there", but they don't actually show an image...just an image "box" I guess you could call it. It's not the "broken" image or "invalid" image display, but a friendlier one that doesn't make sense to me why it's there.
I look at the page's source and literally everything's fine, but I'm not sure what's going wrong. I can show you my code, and hopefully someone will point out the dumb thing I'm doing wrong:
[Code]....
[Code]....
So, it takes all the .JPG files in the folder "Pictures" of my project's folder and creates an Image control to be put into Panel1 with the ImageURL as its filename (with Directory Path) and even set the ID to its filename (so no duplicate IDs). Again, the source is exactly how it should be, but no image is shown.
View 7 Replies
Nov 8, 2010
I've been reading up on the problems with dynamically created controls and how they have been solved. The posts I have come across are creating the controls in a panel or some other open place. I can't seem to get my checkbox to fire the event from inside a gridview. below is the code behind from inside the GridView PreRender event.
[Code]....
..And the Checked Event..
[Code]....
So after all this, nothing happens. I get the postback flash but my command inside the checked event doesn't fire.I tried putting the dynamic creation of the checkbox in Page Load with no effect.. I think because I can't place the checkbox inside the GridView under page load.
View 5 Replies
Apr 23, 2012
Image Button in Datalist it ItemTemplate and Image Button Click Call Editor(Ajax)
View 1 Replies
Apr 19, 2010
Button click is not firing for some reason. This button is in a content page.(Master page)
I am not sure what is happening.
View 6 Replies
Mar 10, 2010
Something strange is going on. I have requiredfieldvalidators on 2 textboxes. I enter data and I cannot click the asp button. but when i remove the validation group I can click the button.
[Code]....
There are 2 boxes within the group
And the lower button. Any ideas why this isn't working? I enter info into all textboxes and I still can't fire the button event. Remove the group and it's fine.
View 12 Replies
Feb 19, 2010
I'm facing a weird issue...My button events are not firing :(I'm using the 3.5 .net framework and I've already tried to run aspnet_regiis -c, clear the browser temp files, use windows integrated authentication, but nothing works...this is the cenario:
- windows server 2003
- app migrated from .net framework 1.1 (which was working fine) to .net framework 3.5
- IE8
View 8 Replies
Feb 18, 2011
If my ASP.NET button starts out visible to the client, it works just fine when clicked:
<asp:ImageButton ID="btn_Submit" ImageUrl="~/images/submit.png" runat="server" onclick="btn_Submit_Click" />
However, if the button was inside a hidden div to start it does not fire after being revealed:
<div style="display: none;" id="hiddenDiv">
<asp:ImageButton ID="btn_Submit" ImageUrl="~/images/submit.png" runat="server" onclick="btn_Submit_Click" />
</div>
The DIV is unhidden with jQuery ($('#hiddenDiv').show()). Why would the button work when it starts out visible, but not when it started out hidden and was made visible in jQuery?
View 2 Replies
Jun 5, 2010
I have a webfrom on which I have some textbox controls, validation controls and button controls. When I click the button is validating the form but when I fill the text boxes with valid data and click the button nothing is happening i.e. the page is not posting back and button_onclick event is not firing. Below is the markup.
<table>
View 11 Replies
Feb 7, 2011
I am using vs 2008 in my wepage i have one update button which is not fired in first click i deleted all coding and tried for this simple line coding for this also not firing in first click
protected void btn_update_Click(object sender, EventArgs e)
{
Label_error.Text = "Updated";
}
View 8 Replies
Oct 6, 2010
I'm having the all fun issue of the SelectIndexChanged handler firing on the button click of the submit button on the page. I have up to 5 dropdownlists on the page and show them based on a procedure from the users type. I also turn the autopostback on and off depending on how many ddl's are on the page. I have tried adding the EnabledViewState on the updatepanel, ddl controls, etc to no evail. Is there a simple fix for this?
View 2 Replies
Mar 24, 2011
I am designing a page wherein I want to display just parts of a page on page_load (i.e. menu bar). Then a few seconds later, I would like to display the rest of the controls (i.e. charts). Is this possible? What I currently have is a page that displays the page skeleton and then on button_click(), the rest of the page is rendered. I want to fire a button_click() event on code-behind without actually requiring the user to click on the button but can't seem to find good tutorials/articles regarding this approach.
View 5 Replies
Nov 22, 2012
i want to upload mp3 songs and also download it....
i got code from our partner site and it is useful but when i click on upload button then it doesnt go to that click event so that code is not working...
my code is:=
protected void mpsong_button_click(object sender, EventArgs e) { using (BinaryReader br = new BinaryReader(FileUpload1.PostedFile.InputStream)) { byte[] bytes = br.ReadBytes((int)FileUpload1.PostedFile.InputStream.Length); { {
[Code]....
View 1 Replies
Jun 7, 2010
I'm creating a next/previous function for my repeater using pageddatasource. I added the link button control dynamically in my oninit using the following code.
LinkButton lnkNext = new LinkButton();
lnkNext.Text = "Next";
lnkNext.Click += new EventHandler(NextPage);
if (currentPage != objPagedDataSource.PageCount)
[Code]....
So I am incrementing the cookie I am using to track the page number and then rebinding the repeater.
Here is the main issue. The first time I click Next, it works, it goes to Page 2 without any problems. When on Page 2, I click Next, it goes back to Page 1. Seems like the Next event is not wiring up properly.
View 1 Replies
Feb 8, 2012
I have a page where I add a dynamic user control in the Page_Load event based on criteria.
The control is a simple form with a save button. The problem is the _Click event never fires for the button. It will postback the main page the control is within, but not the code behind for the control...so I never get the button click even, and therefor can't execute the save code.
Tried it in the init, tried adding the control to a placeholder, tried a lot of various things but nothing seems to work.
Code:
If cb_business_profile.Items.Count = 0 Then
Dim u_pnl_content As UpdatePanel = Page.FindControl("u_pnl_content")
u_pnl_content.ContentTemplateContainer.Controls.Clear()
Dim business_profile_detail As Control = LoadControl("~/controls/business_profile_detail.ascx")
[Code] ....
View 3 Replies
Jul 24, 2013
im creating dynamic buttons on page load and on the click event of button1 handlere iam creating more buttons this is going fine but on click event of button 2 work is not done so how to maintain a chain of creation of button on click events
protected void Button2_Click(object sender, EventArgs e)//
{
ClientScript.RegisterClientScriptBlock(this.GetType(), ((Button)sender).ID, "<script>alert('Button_Click');</script>");
Response.Write(DateTime.Now.ToString() + ": " + ((Button)sender).ID + " was clicked");
}
protected void Button_Click(object sender, EventArgs e)//this button click will call all the items related to department
[code]....
View 1 Replies
