AutoPostBack Not Working For Custom Control?
Jan 12, 2011
I have created a custom control in ASP.net which includes a DropDownList with AutoPostBack set to true. I have also attached an event SelectedIndexChanged for the control.But I find that the event is not fired. Where as normal asp.net DropDownList with AutoPostBack set to true will fire the event. I am using .net 3.5 version in VS2010.
Here is my code:
ServerControl1.cs
[ToolboxData("<{0}:ServerControl2 runat=server></{0}:ServerControl2>")]
public class ServerControl1 : WebControl
{
protected DropDownList drplist;
protected TextBox tb;
protected override void RenderContents(HtmlTextWriter output)
{
[Code]....
View 1 Replies
Similar Messages:
Jun 8, 2010
I have an AJAX enabled ASP.Net 3.5 app in which I have:
A Master PageA Web Content PageA User ControlMore precisely, there's a Placeholder control in the Web Content Page into which one of many User Controls are loaded (one at a time or none at all).
The basic User Control I'm working with has a bunch of Labels and one DropDown ListBox. The latter control is a date selector - ie. June 2010, May 2010, April 2010, etc. When the user changes the date, since AutoPostBack = true for the control, a PostBack occurs. But when this happens, the User Control disappears!
All I want is for a partial postback to occur so that I can use the new date to repopulate the various Label controls. I even put the Placerholder control in its own UpdatePanel but this didn't resolve anything - the User Control still disappeared.
View 7 Replies
Sep 3, 2010
Iam developing a custom checkbox control deriving from the 'compositecontrol' which i need to use it for a composite control purpose.
public
class
TngCheckBox :
CompositeControl
{
i have written the required properties which are working fine except the "checked" property. here is my code for 'checked' property. i tried both the below ways (commented one and not commneted) . the problem is the 'checked' value is not setting the value at the get set part of the property.its assigning the value at the design time , but when i check and uncheck its not updating the property value.which is resulting me wrong .
[Code]....
View 2 Replies
Oct 15, 2010
Iam developing a custom checkbox control deriving from the 'compositecontrol' which i need to use it for a composite control purpose.
public
class
TngCheckBox :
CompositeControl
{
i have written the required properties which are working fine except the "checked" property. here is my code for 'checked' property. i tried both the below ways (commented one and not commneted) . the problem is the 'checked' value is not setting the value at the get set part of the property.its assigning the value at the design time , but when i check and uncheck its not updating the property value.which is resulting me wrong .
[Code]....
View 4 Replies
Jan 13, 2010
When I implement Custom web control inheriting ASP.NET Menu Ajax is not working. I try to Override Render method and generate Li's rather than table.I try to use Control Adapters, but when I am not using adapters for some pages ithe base adapter is generating just hyperlinks with span. I do not want this way. So I can not use these.
View 1 Replies
Jul 6, 2010
With the following code:
<script type="text/javascript" src="../../Scripts/jquery-1.4.1.js" />
<script type="text/javascript">
$(function () {
[code]...
View 1 Replies
Jun 26, 2010
I have a gridview with checkboxes going down the side for each item. Some are enabled and others are not. At the top of the page is a checkbox which when checked will make all the checkboxes on the side enabled. THis is not working and I have tried 2 variations. What am I doing wrong?
[Code]....
View 8 Replies
Apr 27, 2016
When I select the item in 1st dropdownlist, values are fetched from database and want to display in second dropdownlist... but the autopostback is not working for the 1st dropdownlist..
View 1 Replies
Jun 11, 2010
I have developed a ASP.Net Server custom control in C# for 3.5. named "myCheckBoxList" inherited from CheckBoxList web control. Working is very simple. It just works as a two option buttons. I have taken a CheckBoxList which will show two fixed checkboxes always. When I check one checkbox then another will uncheck as vise versa. This control works perfectly only when I have placed only one instance of that control on web page. If I place more than one instance of control then it doesnt works.
I need solution from expert minds from developers as stackoverflow users.
View 2 Replies
Jan 19, 2010
i have two dropdownlist in my webform both are filled dynamically in the page_load event
[Code]....
View 8 Replies
Jun 18, 2010
while i was using flash movie on my application nobody was able to watch it . However I know the reason that is flash plugin should be installed on client side. So here i want to deploy a msg or utility to install a flash plugin as:
there should be a button having text install flash plugin now and on clicking it setup should execute on client side so that it will run setup and every body will be able to watch it.
View 3 Replies
Feb 11, 2010
I have 2 DropDownList in my page:
[Code]....
and in the code behind I have the following:
[Code]....
Now, when you select an item from the 1st DropDownList, you go t the right page, but then if you click on the browser back page, and select an item from the 2nd drop down, still the 1st drop down event will be fired and then you land on the Fixtures.aspx page again instead of Results.aspx.
I assume it is not a bug and I am missing something in here. I tried Response.Redirect("~/pageurl.aspx",false) as well but still it cause the same sort of problem .
View 5 Replies
Jan 16, 2010
I have build a composite control containing a Label, TextBox and a ImageButton. The idea:
Label text | textbox | imagebutton used for triggering an event
This textbox has a build-in validation.
When the imagebutton is set, i will use this imagebutton as a trigger. This imagebutton has an onclick event. Nou my problem is the following:
When i have my textbox on a form an click a button to validate my textbox validation takes place correctly.
If my textbox has the imagebutton enabled and i click this imagebutton validation takes place.
In my composite control i have implicity set imagebutton.CausesValidation = false;
View 4 Replies
Mar 29, 2010
I am using an asp.net autopostback enabled dropdown list. Here i want to restrict the autopostback property fot the value "Select" in the ddl. I have used javascript for this purpose. but not working.My code look like this.
[Code]....
View 10 Replies
Feb 28, 2011
Iam trying to use System.Web.UI.WebControls.Calender. But when I select any date , It post backs automatically. Is there any way to avoid this behavior. (I dont see the usual property AutoPostback which I set to False to avoid this behavior) I need the selected date only once user submits the form. Note- I am using VS2008
View 2 Replies
Nov 11, 2010
If have the below markup.
<asp:checkbox id="chkTVLic" runat="server" text="TV Licence" oncheckedchanged="chkDocs_CheckChanged"
autopostback="true" CausesValidation="false" />
<asp:panel id="pnlTVLic" runat="server" visible="false">
<div class="toggle-item-link1 document-date">
<asp:panel id="pnlTVLicIssueDate" runat="server">
<p>
Please enter the date of issue
</p>
<div class="fm-req">
<asp:textbox id="txtTVLicIssueDate" cssclass="tb size2" runat="server" onblur="return true;"></asp:textbox>
<cc2:calendarextender id="caleTVLicIssueDate" runat="server" targetcontrolid="txtTVLicIssueDate"
popupbuttonid="ibnTVLicIssueDate" popupposition="BottomLeft" animated="true"
format="dd/MM/yyyy">
</cc2:calendarextender>
<asp:imagebutton id="ibnTVLicIssueDate" runat="server" imageurl="../images/img-calendar-day.png"
alternatetext="Calendar" tooltip="Pick Date" cssclass="date-picker" />
<asp:requiredfieldvalidator id="rfvTVLicIssueDate" CssClass="error" runat="server" controltovalidate="txtTVLicIssueDate"
display="Dynamic" errormessage="Required" setfocusonerror="true" validationgroup="TVLic"></asp:requiredfieldvalidator>
<asp:comparevalidator id="cmvTVLicIssueDate" CssClass="error" runat="server" errormessage="Not a valid date"
controltovalidate="txtTVLicIssueDate" operator="DataTypeCheck" type="Date" setfocusonerror="true"
validationgroup="TVLic" display="Dynamic" cultureinvariantvalues="true"></asp:comparevalidator>
<asp:customvalidator id="cuvTVLicIssueDate12Months" CssClass="error" runat="server" controltovalidate="txtTVLicIssueDate"
validationgroup="TVLic" display="Dynamic" onservervalidate="cuvDocIssueDate12Months_ServerValidate"
errormessage="Document must be less than 12 months old."></asp:customvalidator>
</div>
</asp:panel>
<asp:panel id="pnlTVLicApprove" runat="server">
<asp:LinkButton id="lbnTVLicApprove" runat="server" CssClass="screen-hide"
alternatetext="Confirm TV Licence" tooltip="Confirm TV Licence" Text="OK" CausesValidation="false" OnClick="lbnApproveConfirm_Click" />
<asp:imagebutton id="ibnTVLicApprove" runat="server" imageurl="../images/img-accept-doc-off.png"
alternatetext="Approve" tooltip="Approve" cssclass="approval-btn" causesvalidation="true" validationgroup="TVLic" OnMouseDown="HandleApproveClick('TVLic','lbnTVLicApprove');return false;" OnClientClick="HandleApproveClick('TVLic','lbnTVLicApprove');return false;" />
<span class="approval-label">Accept document:</span></asp:panel>
</div>
</asp:panel>
The app is written in c# but i havn't posted any actual code as all the user code related to this markup seems to work fine.
The problem is the CheckBox chkTVLic has causes validation set to false and autopostback set to true. So whatever happens when i check and uncheck the checkbox it should postback. Most of the time this is exactly what it does and the result is to show and hide pnlTVLic when it is checked and unchecked. However if any on the validators within the panel fire, the checkbox does not cause a postback the first time. It will on all subsequent times but never the first. However it should ALWAYS cause a postback. What could be stopping it. Before someone asks there is no use written client side code, everything is pure .net markup and c# code.
View 1 Replies
Feb 3, 2010
I have a custom control that is based off the gridview control located at: here The control is basically a gridview that automatically creates a column of checkboxes that can be used to "check" individual rows in the gridview. During the gridview's "CreateColumns" event, the "checkboxcolumn" is created dynamically. The checkboxcolumn also contains another checkbox in the header that is used to "select/deselect all" checkboxes in the column. Since the gridview does not automatically remember the state of the checkboxes in the checkboxcolumn on postback, I added a method to the control called "SaveCheckBoxState" which stores the indexes of the checked rows in Viewstate, and then I modified the "OnRowDataBound" event to check the Viewstate and reset the checkboxes based on the Viewstate.
I then added a call to "SaveCheckBoxState" in the gridview's OnSorting and OnPageIndexChanging events. This works great so long as I'm sorting or changing pages. However, I need it to update the viewstate everytime someone clicks or unclicks one of the checkboxes. At this time, the checkboxes are rendered with an onclick event that calls some javascript to highlight the row, or in the case of the checkbox in the header, to select/deselect all checkboxes. I need to call the "SaveCheckBoxState" method from the javascript used by the customcontrol, or I need to find a way to modify viewstate from javascript and perform the same action as "SaveCheckBoxState".
I've tried adding the "SaveCheckBoxState" to the onclick event declaration in the checkboxes, but when run, it simply tells me that the method is undefined. It doesn't exist in the parent page, and I don't think I should have to make an event for the parent page to pass the click to. It seems to me this should be all self contained within the custom control. Does anyone know how I can acheive this? Here is the code for the gridview OnPreRender event where the onclick event of the checkbox is set:
protected override void OnPreRender(EventArgs e)
{
// Do as usual
base.OnPreRender(e);
// Adjust each data row
foreach (GridViewRow r in Rows)
{
// Get the appropriate style object for the row
TableItemStyle style = GetRowStyleFromState(r.RowState);
// Retrieve the reference to the checkbox
CheckBox cb = (CheckBox)r.FindControl(InputCheckBoxField.CheckBoxID);
// Build the ID of the checkbox in the header
string headerCheckBoxID = String.Format(CheckBoxColumHeaderID, ClientID);
// Add script code to enable selection
cb.Attributes["onclick"] = String.Format("ApplyStyle(this, '{0}', '{1}', '{2}')",
SelectedRowStyle.CssClass,
style.CssClass,
headerCheckBoxID);
// Update the style of the checkbox if checked
if (cb.Checked)
{
r.BackColor = SelectedRowStyle.BackColor;
r.ForeColor = SelectedRowStyle.ForeColor;
r.Font.Bold = SelectedRowStyle.Font.Bold;
}
else
{
r.BackColor = style.BackColor;
r.ForeColor = style.ForeColor;
r.Font.Bold = style.Font.Bold;
}
}
}
View 1 Replies
Mar 4, 2010
I have a custom control which inherit from the Table class and in the constructor, it takes a an integer as an argument. There is no empty constructor.
Is there a way for the user to set that variable in the properties window after they drag the control onto a form.
I know some .NET controls, you can set the source for the parameter to different things like another control's property, QueryString using just the properties window.
Right now, I have to create the control dynamically. I read the query string and then created the object.
View 1 Replies
Feb 2, 2011
I have controls and some has AutoPostBack set to true.
i.e
<asp:CheckBoxList ID="cblTest" runat="server" AutoPostBack="true"
OnSelectedIndexChanged="cblTest_SelectedIndexChanged" >
</asp:CheckBoxList>
How can I capture which control has triggered the autopostback event when it runs again in the Page_Load method.
View 2 Replies
Dec 24, 2010
here's a situation and I would appreciate your response.
I have programmatically created the Wizard control:
Page_Load(obj s, evargs e)
{
Wizard ClaimDetailWizard = new Wizard();
foreach(int item in selectedItems)
{
//create new step
//added custom control to new step
//add step to wizard
}
//added wizard to a placeholder on a page
}
Based on List I get from Session i added new steps to my wizard To each step I had added a custom control
Each custom control in tern contains another custom Gridview Control in it.
So here's the problem when the page loads for example for two steps. All is good Wizard does what it's supposed to do.
But when I try to use sorting or paging in that custom Gridview. Somehow it displays the gridview I should see in the next step of the wizard.
Also what I'm noticing through debugging. Is that when I press next in the wizard I go back to the original page where I do all of the code specified above, and it recreates the wizzard. But it goes to the next step. Is this the way wizard supposed to work? Just doesn't seem very efficient.
View 1 Replies
Dec 20, 2010
created a Custom Textbox Control that is intended to be a "masked date" textbox, so that I can handle different ways a user might enter in a date and make it work no matter what.I did this by creating a custom control with 3 separate Textboxes one for month,one for day one for year,then do some handling for different things that could be entered and it would all work.
The problem I am having is,when I add this control to the page,if I do an alert to check the Text value of the custom control it just gives me "[ServerControl1]" even if I enter in a date.
I tried doing an AutoPostback after entering so that it would refesh the Viewstate to have the values of the textboxes but the control doesnt seem to actually postback, even though I have it enabled.accessing the Textbox value after someoen
has entered a date?first custom control I have created and have been using google.
My Server Control Code is as follows:
[Code]...
View 1 Replies
Oct 27, 2010
I have created a user control and am ready to convert it into a custom control. I am trying to follow:
[URL] the steps mentioned in the link.
I am not seeing Build / Publish Web Site option.
I am using VS 2008. I only see Publish User Control but it doesn't give all the settings mentioned below. When I do publish user control, it just copies the ascx file to the desired location. how can I convert the user control to custom control.
View 2 Replies
Jan 8, 2011
I am having a problem with dropdownlist auto post back set to true...
In my project I have to hide and display two other dropdown lists depends on selected index change of a main dropdown..
I set the auto postback to true and I am hiding and displaying the dropdowns on user selection...Everthing is working fine..
But I am having a very hard time when user types when the dropdown got focus..this is very annoying situation..if type one word its doing a postback and they are unable to type further...
is there any way to fire this onselectedindex change event on blur or on enter key press...is there a way of doing it with java script or jquery...
View 6 Replies
May 4, 2010
I have an issue that I've been fighting with for some time. I have a large web form, with update panels and autopostback controls. When the users click "submit", some custom javascript runs which shows validation summaries and turns the fields with errors red, relatively easy, and it works as expected. The problem is that I have a dropdownlist which should autopostback an update panel. It does this perfectly if the user does not click the submit button, and therefore my custom client script dosesn't execute.However, if a user clicks submit, the custom client script executes (turns fields red and shows validation summaries), and then the dropdownlist does NOT autopostback the first time a user changes it's value. If the user changes the dropdownlist's value a second time, then the autopost back occurs and everything functions as it should. I don't understand why the autopostback is disabled for the first click after the javascript executes. Can someone please help me out? The DropDown List looks like:
[Code]....
The Submit button is:
[Code]....
View 16 Replies
Oct 18, 2010
I created an Extender which has a custom property that drills down a list XML elements from an xml file, where users can select xml elements during design-time. This works perfectly fine. However, my code only has a hardcoded xml filename (source of the xml elements list) and I need to change this by maxing the xml file user-specified.
What I did is that I created another control (panel) which has a custom property that when clicked (through the ellipsis), it will allow a developer to select the xml file which is supposed to be the source xml file that the Extenders shall use. The filedialog from custom panel's property works perfectly fine.
However, my problem now is that when I drag-drop my Extender, I cannot find a way to get the property value of the custom Panel Control which contains the xml filename. I tried creating a static variable which I thought the custom controls can share but VS2010 is breaking.
View 4 Replies
