Configuration :: 500 - Internal Server Error. There Is A Problem With The Resource You Are Looking For?
Sep 21, 2010
Totally new to ASP.net and IIS 7.0
-company setup a new web server with IIS 7.0
-ASP.NET Impersonation, Windows & Basic authentication all are enabled
-web server is in STARTED status
-asp.net web site runs ok on my machine in vs2005, created a deploy project and deployed to my computer, ran msi file, and copied that folder to web server that has IIS 7.0
-asp.net web site web.confg has windows authentication and included identity impersonate="true".
This is newly setup web server and has not been used for hosting ASP.net web site before. If have disabled in IE the "Show friendly HTTP Errors Messages" to get what error really is. I can ping the server.
View 2 Replies
Similar Messages:
Sep 16, 2010
I am developing an application which is running fine on local machine. It is using webservices and jquery's ajax to call that service. It also has some asp hidden fields. I deploy it with visual studio. It is giving me error that the resource I am looking for is not found.
View 2 Replies
Apr 20, 2010
I am currently trying to setup our website on a windows 2008 R2 64bit machine without much success. When I try to run the website I get the error detailed below. This only happens when I run the site under .NET 4. It works when I run it under .NET 2.
I have also tried going to a test aspx page to see what happens and it also give me the same error so it is obviously something to do with .NET 4 or the way I have it set up. I am thinking it might be a permissions thing but I am not sure what permissions should be set where. Please note this is the full version of .NET 4. The error I keep getting is:
HTTP Error 500.0 - Internal Server Error
An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.Detailed Error Information
Module AspNetInitClrHostFailureModule
Notification BeginRequest
Handler PageHandlerFactory-Integrated-4.0 [code]....
Most likely causes: The module could not be found.IIS received the request; however, an internal error occurred during the processing of the request. The root cause of this error depends on which module handles the request and what was happening in the worker process when this error occurred.
IIS was not able to access the web.config file for the Web site or application. This can occur if the NTFS permissions are set incorrectly.
IIS was not able to process configuration for the Web site or application. The authenticated user does not have permission to use this DLL.
The code in the test.aspx is
<%@ Page language="vb" %>
<html>
<body> [code]....
View 9 Replies
Mar 22, 2011
I try to upload web application to the server. After that I access it through http://..., but get
[Code]....
I search on the web, and add IIS_IUSRS to security of the folder of web application, and upload again. But still get same error. I need help on this,
View 2 Replies
Sep 20, 2015
the same application is working fine in 32 bit machine of my colleague where as in my 64 bit machine I am getting the following error. I also tried by changing Target Platform of the web app, under Properties-->Build-->Platform Target: From X86 to X64, in fact I tried all 3.
HTTP Error 500.19 - Internal Server Error
The requested page cannot be accessed because the related configuration data for the page is invalid.
Detailed Error Information:
Module
IIS Web Core
Notification
BeginRequest
[Code]....
Config Source:
18: <validation validateIntegratedModeConfiguration="false"/>
19: <handlers>
20: <remove name="ChartImageHandler"/>
More Information: This error occurs when there is a problem reading the configuration file for the Web server or Web application. In some cases, the event logs may contain more information about what caused this error.
View more information »
View 1 Replies
Jun 7, 2010
I've got two sites hosted on a win2008R2 box that I just moved to .net 4 from 3.5. One worked well, but the other is showing a 500-internal server error on the server. It builds fine in VS, and runs fine in Cassini.I've changed the app pool to .net 4 and copied the new web config into the site, but I still get an error. I did this about a month ago with another site and everything worked fine.I can't use my own error logging code because my app doesn't even get started, and IIS doesn't seem to leave anything in the application event log. Apologies in advance for a dumb question, but where can I get some more detail on this error?500 - Internal server error.There is a problem with the resource you are looking for, and it cannot be displayed.
View 8 Replies
Jun 8, 2010
I have a web site that has always run fine for years and years under 3.5. I converted it recently to run under 4.0, and it runs on Cassini fine. When I attempt to deploy the app to an IIS7 server that has 4.0 installed, all I get is "internal server error", and no error messages in the Event log, and nothing in the http logs.
I've double checked that the application pool I've deployed to is running 4.0.
It's an x64 web server and app (always has been while it was under 3.5.
View 5 Replies
Dec 4, 2010
I have deployed my website/app on GoDaddy hosting and am getting this Internal server error message only when trying to view the /stats folderI have forms authentication on, and when I try and visit this folder I get redirected to my CMS login page which is really strange. When I disable authentication I then get this internal server error.Anyone ever experience something like this? GoDaddy support don't and never seem to a have a clue about anything.
View 1 Replies
Nov 6, 2010
My host moved my website to a new server. The DNS configuration is correct but the website is still down and I'm getting this message
"unable to open website at www.aboutmecfs.org. Internal Server error"
View 9 Replies
Mar 29, 2010
why I'm getting this error? I just re-created (not migrated) my app that was in ASP.NET 1.1 to ASP.NET 2.0. Whole app works perfectly. The only problem I'm getting with this piece of code for the Web Services. I'm running both versions at the same time side-by-side and it works fine in 1.1 and doesn't work in 2.0.
URLName = Context.Request.Url.Segments
URLName0 = URLName(0)
URLName1 = URLName(1)
URLName2 = URLName(2)
URLHost = Request.UserHostName
URLStr = "http://" & URLHost & URLName0 & URLName1 &
"SomePage.aspx?" & "SectionID=" & SectionID
' Create a 'WebRequest' object with the specified url
Dim myWebRequest As WebRequest =
CType(WebRequest.Create(URLStr), WebRequest)
' Send the 'WebRequest' and wait for response.
Dim myWebResponse As WebResponse =
CType(myWebRequest.GetResponse(), WebResponse)
Bam! Error! The remote server returned an error: (500) Internal Server Error.
View 11 Replies
Nov 9, 2010
In IIS we have a virtual directory (named as "Documents") with in application virtual directory (named as "Reference") that points to an shared folder.All the files with in the "Documents" folder are listed and opened by the user (by clicking on the file name) with in the application
"Reference" application runs under an application pool. This application pool is configured to run with an Active directory account. This AD account has been granted write and modify permissions on the shared folder that contains the html files.
When user tries to open any of the html file located with in the shared location from the application following error is thrown.
System.Net.WebException: The remote server returned an error: (500) Internal Server Error
I tried to browse to the location manually and I can see the required files there.
These files where accessible from our application until yesterday. But we started encountering this error from today.
Is there any IIS settings that needs to be modified?
View 4 Replies
Sep 3, 2010
I have recently developed a new vs2010 web application that I would like to add to my web site.
The existing website was developed using vs2008. The web site is hosted on a windows 2008 server running iis 7. My new web application sits below my main website i.e. mywebite mywebsite/mynewwebsite
I have set the application pools for the mynewwebsite to be asp.net v4.0, leaving the application pools for mywebsite as .net v2.0 If I try and open my new web application i.e. [URL] then I get 500. Internal server error. I assume that it is iis that is unhappy here. Do I have to rebuild the whole of my web site to be vs2010 using asp.net v4.0. If I do should I use ASP.Net v4.0 or ASP.net v4.0 Classic for my application pools, and should I have a separate and distinct application pool for each of my web applications ( I have 4 of these) Just to clarify my clients can log on the web site as
[Code]....
View 1 Replies
Jun 28, 2010
I have got a problem tesing paypal sandbox IPN. i have got this error message: IPN delivery failed. HTTP error code 500: Internal Server Error
I could not find out what this error means.
View 1 Replies
Apr 12, 2010
I have just installed IIS manager version 6.1 build 7600 and visual studio 2010 (latest additions of both).
I have followed all the instructions and given the correct permisions ect for IIS to work with my directory. I have a helloworld website that has worked via the localhost server many times, but almost hourly something happens to the settings in IIS and it starts throwing errors.
The current error copied below. Basically I am wondering a few things...
1. Why does my IIS constantly do something so that it works one minute and then it wont the next (this is with an identical helloworld.htm file so I know it is not something I am doing with the file that is messing it up).
HTTP Error 500.0 - Internal Server Error
Calling LoadLibraryEx on ISAPI filter "C:WindowsMicrosoft.NETFrameworkv4.0.30128aspnet_filter.dll" failed
Module
IIS Web Core [code]......
View 6 Replies
Jul 26, 2010
I am building a web application that is used to access and report to and from a database in a small compnay. The company has there own server for their network and design software. What I want to do is use this netwrok to host the website I have built. What im wanting to know is will this be secure? Can use the comapnys server to host the site, and in a sense not put the website online so that just the computers on the server can access the website? Will this be secure?
View 3 Replies
Apr 23, 2010
When I run my app locally I get no errors. No error from Global.asax, no redirection to an error page. Everythings works fine.
When I deploy my app to a test server, my app run there with no errors. No error from Global.asax, no redirection to an error page. Everythings works fine on the test server.
But when I deploy my app to production server, the app runs fine but I keep getting errors (emailed to me) from Global.asax. On production server we have these security apps that run and keep hitting all URLs of the app on the server. Just to make sure they are working fine. When these security app hit URL of my app, my application runs fine but it gives out this global.asax error. The funny thing is that error is empty. The error are emailed to me and the email is empty. Nothing there.
There are several other apps running on the same server. My app has its own app pool and is configured correctly.
View 4 Replies
Apr 23, 2010
string furl = [URL] + rowr["msidn"].ToString() + "&subscode=" + rowr["content_id"].ToString() + "&price=" + cost + "&extid=" + exter + "&days=" + rowr["duration"].ToString() "&eventtype=ReSubscription&templateid=14";
View 1 Replies
Aug 16, 2010
I want to call my WebService using HttpWebRequest, but I get Error:The remote server returned an error: (500) Internal Server Error. The webservice works fine through the following url: [URL]
[Code]....
View 3 Replies
Jan 11, 2010
I'm very new to ASP and have been writing a site which has been working fine both in development and on my production server.
However I added some reports to my site and now it works fine when I run debug on my local machine, but when I package the solution and move it onto my production server I get:
HTTP Error 500.23 - Internal Server Error
An ASP.NET setting has been detected that does not apply in Integrated managed pipeline mode.
I'm suing server 2008 STD X64 with IIS7. I've made sure all my windows updates are done.
I've no idea whats causing this. I've tried removing the pages with reports on and I still get the same issue.
View 3 Replies
Oct 19, 2010
Im using Google Analytics Dashboard Control which are available at [URL] Issue is its working fine when im connected to internet but if im using it on a machine that doesnt have internet access then it shows Server Error in '/' Application. The remote name could not be resolved: '[URL]' I want to catch this exception and shows a friendly message to user. Im calling these dashboard control on my View in an iframe like this <iframe src="../../GoogleAnalytics/Visitor.aspx" height="275"></iframe> and if i place try catch in Visitor.aspx page it doesnot catch the exception. How should i catch this exception, Im using asp.net mvc 2 with c#
View 3 Replies
Nov 4, 2010
I have a heavy traffic aspx page calling a web service upon every user`s request as follows.
string uri = "Path.asmx";
string soap = "soap xml string";
HttpWebRequest request = (HttpWebRequest)WebRequest.Create(uri);
request.Headers.Add("SOAPAction", ""http://xxxxxx"");
request.ContentType = "text/xml;charset="utf-8"";
request.Accept = "text/xml";
request.Method = "POST";
using (Stream stm = request.GetRequestStream())
{
using (StreamWriter stmw = new StreamWriter(stm))
{
stmw.Write(soap);
}
}
WebResponse response = request.GetResponse();
response.close();
Everything is working fine but sometimes I am getting the following error. The remote server returned an error: (500) Internal Server Error. at System.Net.HttpWebRequest.GetResponse() Does anybody have any idea about this error or can anybody tell me if I am doing wrong.
View 2 Replies
Jul 26, 2010
I have a web application runs @ Windows 2008 R2, ASP.NET v4.0.
I installed the Url Rewrite Module, and started to use it as shown in the official examples.
My problem starts when the <rewrite> tag is added to the web.config under <system.webServer> - actually when I try to browse to any page under this current application, I get 500 - Internal server error.This is the <rewrite> block I've been adding:
<system.webServer>
<rewrite>
<rules> [code]....
View 1 Replies
Mar 22, 2011
I first time tying deploy ASP.NET MVC3 Web App and after upload files and made database I had problems with diplaying sites...I was redirected to "page not found'. After add to web config I get following error:
Server Error 500 - Internal server error. There is a problem with the resource you are looking for, and it cannot be displayed. What I need to do now?
View 3 Replies
Mar 22, 2011
I first time tying deploy ASP.NET MVC3 Web App and after upload files and made database I had problems with diplaying sites...I was redirected to "page not found'. After add <customErrors mode="Off"/> to web config I get following error:
I first time tying deploy ASP.NET MVC3 Web App and after upload files and made database I had problems with diplaying sites...I was redirected to "page not found'. After add <customErrors mode="Off"/> to web config I get following error:
Server Error
View 6 Replies
Aug 12, 2010
In reference to the accepted answer in http://stackoverflow.com/questions/3464141/php-website-to-aspx-net-website. Creating a new post since that post was over-loaded with comments.
htaccess file
AddType application/x-httpd-php .aspx
AllowOverride AuthConfig in apache config file.
trying to parse php in the aspx page.
index.html / index. aspx
This is the index file. OK!
<?echo "PHP working";?>
View 1 Replies
