Configuration :: Internal Server Error Deploying Upgraded Website From 3.5 To 4.0?
Jun 8, 2010
I have a web site that has always run fine for years and years under 3.5. I converted it recently to run under 4.0, and it runs on Cassini fine. When I attempt to deploy the app to an IIS7 server that has 4.0 installed, all I get is "internal server error", and no error messages in the Event log, and nothing in the http logs.
I've double checked that the application pool I've deployed to is running 4.0.
It's an x64 web server and app (always has been while it was under 3.5.
I first time tying deploy ASP.NET MVC3 Web App and after upload files and made database I had problems with diplaying sites...I was redirected to "page not found'. After add to web config I get following error:
Server Error 500 - Internal server error. There is a problem with the resource you are looking for, and it cannot be displayed. What I need to do now?
I first time tying deploy ASP.NET MVC3 Web App and after upload files and made database I had problems with diplaying sites...I was redirected to "page not found'. After add <customErrors mode="Off"/> to web config I get following error:
I first time tying deploy ASP.NET MVC3 Web App and after upload files and made database I had problems with diplaying sites...I was redirected to "page not found'. After add <customErrors mode="Off"/> to web config I get following error:
so I have a fully functioning DynamicData website, and all works fine when debugging in VS2010But when I moved the site to a webserver (server 2008, IIS7) the default paeg comes up, but any links or pages after that are all sending 404 errors http://{IP address}/{table}/{action}.aspxdoes not work when on the server, but works fine in VS.What configuration am i missing from IIS7 to make this url work?
I have recently developed a new vs2010 web application that I would like to add to my web site.
The existing website was developed using vs2008. The web site is hosted on a windows 2008 server running iis 7. My new web application sits below my main website i.e. mywebite mywebsite/mynewwebsite
I have set the application pools for the mynewwebsite to be asp.net v4.0, leaving the application pools for mywebsite as .net v2.0 If I try and open my new web application i.e. [URL] then I get 500. Internal server error. I assume that it is iis that is unhappy here. Do I have to rebuild the whole of my web site to be vs2010 using asp.net v4.0. If I do should I use ASP.Net v4.0 or ASP.net v4.0 Classic for my application pools, and should I have a separate and distinct application pool for each of my web applications ( I have 4 of these) Just to clarify my clients can log on the web site as
When I run my app locally I get no errors. No error from Global.asax, no redirection to an error page. Everythings works fine.
When I deploy my app to a test server, my app run there with no errors. No error from Global.asax, no redirection to an error page. Everythings works fine on the test server.
But when I deploy my app to production server, the app runs fine but I keep getting errors (emailed to me) from Global.asax. On production server we have these security apps that run and keep hitting all URLs of the app on the server. Just to make sure they are working fine. When these security app hit URL of my app, my application runs fine but it gives out this global.asax error. The funny thing is that error is empty. The error are emailed to me and the email is empty. Nothing there.
There are several other apps running on the same server. My app has its own app pool and is configured correctly.
I am currently trying to setup our website on a windows 2008 R2 64bit machine without much success. When I try to run the website I get the error detailed below. This only happens when I run the site under .NET 4. It works when I run it under .NET 2.
I have also tried going to a test aspx page to see what happens and it also give me the same error so it is obviously something to do with .NET 4 or the way I have it set up. I am thinking it might be a permissions thing but I am not sure what permissions should be set where. Please note this is the full version of .NET 4. The error I keep getting is:
HTTP Error 500.0 - Internal Server Error
An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.Detailed Error Information
Most likely causes: The module could not be found.IIS received the request; however, an internal error occurred during the processing of the request. The root cause of this error depends on which module handles the request and what was happening in the worker process when this error occurred.
IIS was not able to access the web.config file for the Web site or application. This can occur if the NTFS permissions are set incorrectly.
IIS was not able to process configuration for the Web site or application. The authenticated user does not have permission to use this DLL.
The code in the test.aspx is <%@ Page language="vb" %> <html> <body> [code]....
the same application is working fine in 32 bit machine of my colleague where as in my 64 bit machine I am getting the following error. I also tried by changing Target Platform of the web app, under Properties-->Build-->Platform Target: From X86 to X64, in fact I tried all 3.
HTTP Error 500.19 - Internal Server Error
The requested page cannot be accessed because the related configuration data for the page is invalid. Detailed Error Information:
More Information: This error occurs when there is a problem reading the configuration file for the Web server or Web application. In some cases, the event logs may contain more information about what caused this error.
I'm deploying a web site to a server I've set up for testing. The website works great in development (Running in VS 2010) as well as in production on multiple client sites. I'm simply trying to test the site in a new environment. I simply copied the complete site (pages, code, directories, everything...) to my server. In IIS7 I created a new web site pointing to the directory containing my site's files and directories. I can open my site and my initial login page loads.
Database connections are made, page and buttons all seem great. Then, I log in. In the first line of code that attempts to instantiate an instance of a class contained in my App_Code folder, an exception is thrown, 'Invalid object name'. I've messed with as many settings as I could in IIS7 but to no avail. I've searched the internet on something regarding this, but nothing seemed to apply. At this point I'm about ready to install Visual Studio on my server to get it to run (this was the route one of the other developers took).
I've got two sites hosted on a win2008R2 box that I just moved to .net 4 from 3.5. One worked well, but the other is showing a 500-internal server error on the server. It builds fine in VS, and runs fine in Cassini.I've changed the app pool to .net 4 and copied the new web config into the site, but I still get an error. I did this about a month ago with another site and everything worked fine.I can't use my own error logging code because my app doesn't even get started, and IIS doesn't seem to leave anything in the application event log. Apologies in advance for a dumb question, but where can I get some more detail on this error?500 - Internal server error.There is a problem with the resource you are looking for, and it cannot be displayed.
-ASP.NET Impersonation, Windows & Basic authentication all are enabled
-web server is in STARTED status
-asp.net web site runs ok on my machine in vs2005, created a deploy project and deployed to my computer, ran msi file, and copied that folder to web server that has IIS 7.0
-asp.net web site web.confg has windows authentication and included identity impersonate="true".
This is newly setup web server and has not been used for hosting ASP.net web site before. If have disabled in IE the "Show friendly HTTP Errors Messages" to get what error really is. I can ping the server.
I have developed a website using visual studio. Now i want to deploy the same on server having windows server 2008 o.s. and IIS 7. When i copy the website and paste it into wwwroot folder of iis its not working. What settings need to be done so that website can be accessed from iis.
I have deployed my website/app on GoDaddy hosting and am getting this Internal server error message only when trying to view the /stats folderI have forms authentication on, and when I try and visit this folder I get redirected to my CMS login page which is really strange. When I disable authentication I then get this internal server error.Anyone ever experience something like this? GoDaddy support don't and never seem to a have a clue about anything.
I have deployed ASP.net WebSite on Remote Server ....
It gives the Following Error when i tested by typing URL in IE ....
(The URL is college.desiresoftech.com)
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: Could not load file or assembly 'CrystalDecisions.ReportAppServer.ClientDoc, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.Source Error:
[Code] ....
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLMSoftwareMicrosoftFusion!EnableLog].
How can I solve it, i searched on net and the answer was server has no cr Runtime, install CR Runtime on server or Copy the .dll Files in Bin Folder, I downloaded the 10.5.3700.0 CR Runtime bt it is giving error when i try to install it...
I have created a ASP.NET MVC 2 application in VS2010. It runs in integrated development server fine. But when i deploy that in IIS it gives me "The Web server is configured to not list the contents of this directory." error. Anybody know what went wrong?? There is no default.aspx page when creating a MVC2 project in VS2010. is that the problem? I can assure the routes are configured correctly in global.aspx.
I made a simple network tool using Visual Studio 2010 Express, ASP.NET C#.
When I finished, I deployed it to a Local IIS 5.1 Server. I'm running XP(BTW).
The situation right now is that every time I add/change something to suit my needs, it changes it directly on the server - which is obviously unwanted. I want to understand why this is and how to change it. I don't want every test I do to be implemented directly on save.
ps.
On Project->Properties, Web tab. I verified that under the "Servers" option, "Visual Studio Development Server" in checked and not "Local IIS Web Server"
On my local machine I have created a database driven website. All is working well on my local machine.
Now I want to upload it to my Arvixe Hosting. How do I do that from Visual Studio 2010 Keeping in mind I have a Database too ?
Do I need to manually create a Database on the Server ? Do I then create all the tables Manually ? Do I then populate the tables manually ? Or is it a 1 button click ?
I have just developed a website with VS 2008, ASP.NET 3.5. It contains a long range of pages and one contact page. The contact page is connected to a SQLExpress database, where details about all the visitors' requests are stored. The website works fine at the development environment, but when I deploy it to the internet host, the Contact page will not open any longer, due to all sorts of problems with the database. I have the database files located in the App_Data folder under the main directory for the website.
I have tried with all kinds of connection strings, setups, etc. - to no avail. I have also tried using the ISP's tool for creating a new database with the intention of copying the original database to it. But when I use the Publishing Wizard and generate a SQL script, then the Web Administration Tool for the remote database won't run the script. Now my question is, plainly: Is there any step-by-step procedure I can use, if I want a data-enabled website. It seems incredible that it has to be so frustratingly difficult. Basically, what I need, is:
* A database, located in the App_Data folder, to store all information received via the Contact.aspx page. * All visitors of the site should be able to post messages on the Contact.aspx page. * I have got the information from the ISP that I can connect to MSSQL via the server "host55.nethotel.ccSQLEXPRESS".
If a general procedure can be advised, and some directions about how exactly the database should be set up with authentication, rights, etc., for such a - supposedly ordinary - system, then I will be grateful for any information - or somebody who could point me in the right direction of a solution.
I have attempted to deploy my first WEB application and needed to include the Membership for Internet login. Application works fine when I use Visual Web Developer, but when I deploy to my provider when I attempt to Login, I eventually get the error message (this was after I turned on the debug="true" - full message is
[Code]....
When I copied the application to the WebSite, I assumed that the ASPNETDB.MDF needed to be copied too with everything that I defined for users and roles. Looked at the WEB.CONFIG and expected to see something defined here as to where it is located, etc. Do not see anything in my project with the name.
I'm about to roll out my web site soon, and was just wondering if there's a way to roll out the db I'm working with on my dev computer, or if I have to recreate everything on the production server. If I can roll out my dev db, will the uids be the same?
I am developing an application which is running fine on local machine. It is using webservices and jquery's ajax to call that service. It also has some asp hidden fields. I deploy it with visual studio. It is giving me error that the resource I am looking for is not found.
note that i can successfully connect to the db using the user 'SQL2008_736225_aldookandb_user' when i use a remote connection tool, such as sql server managment studio
And you can reproduce this problem, see it live and see the stack trace by doing the following:
A) :
1.go to my website [URL] 2.login as username: Teacher1 password: 123456 (Note that you have been logged in successfully) 3. go to the link in the upper right corner where it says (Teacher Page) 4. booooom!
B):
1. go to the website and create an account as a "Teacher" 2. do steps 2 to 4 from above and same problem occurs
