I first time tying deploy ASP.NET MVC3 Web App and after upload files and made database I had problems with diplaying sites...I was redirected to "page not found'. After add to web config I get following error:
Server Error 500 - Internal server error. There is a problem with the resource you are looking for, and it cannot be displayed. What I need to do now?
I first time tying deploy ASP.NET MVC3 Web App and after upload files and made database I had problems with diplaying sites...I was redirected to "page not found'. After add <customErrors mode="Off"/> to web config I get following error:
I first time tying deploy ASP.NET MVC3 Web App and after upload files and made database I had problems with diplaying sites...I was redirected to "page not found'. After add <customErrors mode="Off"/> to web config I get following error:
Server Error
I have a web site that has always run fine for years and years under 3.5. I converted it recently to run under 4.0, and it runs on Cassini fine. When I attempt to deploy the app to an IIS7 server that has 4.0 installed, all I get is "internal server error", and no error messages in the Event log, and nothing in the http logs.
I've double checked that the application pool I've deployed to is running 4.0.
It's an x64 web server and app (always has been while it was under 3.5.
My host moved my website to a new server. The DNS configuration is correct but the website is still down and I'm getting this message
"unable to open website at www.aboutmecfs.org. Internal Server error"
I have deployed ASP.net WebSite on Remote Server ....
It gives the Following Error when i tested by typing URL in IE ....
(The URL is college.desiresoftech.com)
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: Could not load file or assembly 'CrystalDecisions.ReportAppServer.ClientDoc, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.Source Error:
[Code] ....
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLMSoftwareMicrosoftFusion!EnableLog].
How can I solve it, i searched on net and the answer was server has no cr Runtime, install CR Runtime on server or Copy the .dll Files in Bin Folder, I downloaded the 10.5.3700.0 CR Runtime bt it is giving error when i try to install it...
why I'm getting this error? I just re-created (not migrated) my app that was in ASP.NET 1.1 to ASP.NET 2.0. Whole app works perfectly. The only problem I'm getting with this piece of code for the Web Services. I'm running both versions at the same time side-by-side and it works fine in 1.1 and doesn't work in 2.0.
URLName = Context.Request.Url.Segments
URLName0 = URLName(0)
URLName1 = URLName(1)
URLName2 = URLName(2)
URLHost = Request.UserHostName
URLStr = "http://" & URLHost & URLName0 & URLName1 &
"SomePage.aspx?" & "SectionID=" & SectionID
' Create a 'WebRequest' object with the specified url
Dim myWebRequest As WebRequest =
CType(WebRequest.Create(URLStr), WebRequest)
' Send the 'WebRequest' and wait for response.
Dim myWebResponse As WebResponse =
CType(myWebRequest.GetResponse(), WebResponse)
Bam! Error! The remote server returned an error: (500) Internal Server Error.
In IIS we have a virtual directory (named as "Documents") with in application virtual directory (named as "Reference") that points to an shared folder.All the files with in the "Documents" folder are listed and opened by the user (by clicking on the file name) with in the application
"Reference" application runs under an application pool. This application pool is configured to run with an Active directory account. This AD account has been granted write and modify permissions on the shared folder that contains the html files.
When user tries to open any of the html file located with in the shared location from the application following error is thrown.
System.Net.WebException: The remote server returned an error: (500) Internal Server Error
I tried to browse to the location manually and I can see the required files there.
These files where accessible from our application until yesterday. But we started encountering this error from today.
Is there any IIS settings that needs to be modified?
I want to add mime type in web.config to make downloading files for users.but after adding mime tag, website starts showing internal error 500 and removing this, it runs fine but when user click on files to download then it show error that file not found. So I need to add proper mimetype for my uploaded files. So pls tell me the proper way to add it to web.config file.
View 3 RepliesI have recently developed a new vs2010 web application that I would like to add to my web site.
The existing website was developed using vs2008. The web site is hosted on a windows 2008 server running iis 7. My new web application sits below my main website i.e. mywebite mywebsite/mynewwebsite
I have set the application pools for the mynewwebsite to be asp.net v4.0, leaving the application pools for mywebsite as .net v2.0 If I try and open my new web application i.e. [URL] then I get 500. Internal server error. I assume that it is iis that is unhappy here. Do I have to rebuild the whole of my web site to be vs2010 using asp.net v4.0. If I do should I use ASP.Net v4.0 or ASP.net v4.0 Classic for my application pools, and should I have a separate and distinct application pool for each of my web applications ( I have 4 of these) Just to clarify my clients can log on the web site as
[Code]....
so I have a fully functioning DynamicData website, and all works fine when debugging in VS2010But when I moved the site to a webserver (server 2008, IIS7) the default paeg comes up, but any links or pages after that are all sending 404 errors http://{IP address}/{table}/{action}.aspxdoes not work when on the server, but works fine in VS.What configuration am i missing from IIS7 to make this url work?
View 1 RepliesI have got a problem tesing paypal sandbox IPN. i have got this error message: IPN delivery failed. HTTP error code 500: Internal Server Error
I could not find out what this error means.
I have just installed IIS manager version 6.1 build 7600 and visual studio 2010 (latest additions of both).
I have followed all the instructions and given the correct permisions ect for IIS to work with my directory. I have a helloworld website that has worked via the localhost server many times, but almost hourly something happens to the settings in IIS and it starts throwing errors.
The current error copied below. Basically I am wondering a few things...
1. Why does my IIS constantly do something so that it works one minute and then it wont the next (this is with an identical helloworld.htm file so I know it is not something I am doing with the file that is messing it up).
HTTP Error 500.0 - Internal Server Error
Calling LoadLibraryEx on ISAPI filter "C:WindowsMicrosoft.NETFrameworkv4.0.30128aspnet_filter.dll" failed
Module
IIS Web Core [code]......
When I run my app locally I get no errors. No error from Global.asax, no redirection to an error page. Everythings works fine.
When I deploy my app to a test server, my app run there with no errors. No error from Global.asax, no redirection to an error page. Everythings works fine on the test server.
But when I deploy my app to production server, the app runs fine but I keep getting errors (emailed to me) from Global.asax. On production server we have these security apps that run and keep hitting all URLs of the app on the server. Just to make sure they are working fine. When these security app hit URL of my app, my application runs fine but it gives out this global.asax error. The funny thing is that error is empty. The error are emailed to me and the email is empty. Nothing there.
There are several other apps running on the same server. My app has its own app pool and is configured correctly.
I am currently trying to setup our website on a windows 2008 R2 64bit machine without much success. When I try to run the website I get the error detailed below. This only happens when I run the site under .NET 4. It works when I run it under .NET 2.
I have also tried going to a test aspx page to see what happens and it also give me the same error so it is obviously something to do with .NET 4 or the way I have it set up. I am thinking it might be a permissions thing but I am not sure what permissions should be set where. Please note this is the full version of .NET 4. The error I keep getting is:
HTTP Error 500.0 - Internal Server Error
An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.Detailed Error Information
Module AspNetInitClrHostFailureModule
Notification BeginRequest
Handler PageHandlerFactory-Integrated-4.0 [code]....
Most likely causes: The module could not be found.IIS received the request; however, an internal error occurred during the processing of the request. The root cause of this error depends on which module handles the request and what was happening in the worker process when this error occurred.
IIS was not able to access the web.config file for the Web site or application. This can occur if the NTFS permissions are set incorrectly.
IIS was not able to process configuration for the Web site or application. The authenticated user does not have permission to use this DLL.
The code in the test.aspx is
<%@ Page language="vb" %>
<html>
<body> [code]....
I try to upload web application to the server. After that I access it through http://..., but get
[Code]....
I search on the web, and add IIS_IUSRS to security of the folder of web application, and upload again. But still get same error. I need help on this,
the same application is working fine in 32 bit machine of my colleague where as in my 64 bit machine I am getting the following error. I also tried by changing Target Platform of the web app, under Properties-->Build-->Platform Target: From X86 to X64, in fact I tried all 3.
HTTP Error 500.19 - Internal Server Error
The requested page cannot be accessed because the related configuration data for the page is invalid.
Detailed Error Information:
Module
IIS Web Core
Notification
BeginRequest
[Code]....
Config Source:
18: <validation validateIntegratedModeConfiguration="false"/>
19: <handlers>
20: <remove name="ChartImageHandler"/>
More Information: This error occurs when there is a problem reading the configuration file for the Web server or Web application. In some cases, the event logs may contain more information about what caused this error.
View more information »
string furl = [URL] + rowr["msidn"].ToString() + "&subscode=" + rowr["content_id"].ToString() + "&price=" + cost + "&extid=" + exter + "&days=" + rowr["duration"].ToString() "&eventtype=ReSubscription&templateid=14";
View 1 RepliesI want to call my WebService using HttpWebRequest, but I get Error:The remote server returned an error: (500) Internal Server Error. The webservice works fine through the following url: [URL]
[Code]....
I'm very new to ASP and have been writing a site which has been working fine both in development and on my production server.
However I added some reports to my site and now it works fine when I run debug on my local machine, but when I package the solution and move it onto my production server I get:
HTTP Error 500.23 - Internal Server Error
An ASP.NET setting has been detected that does not apply in Integrated managed pipeline mode.
I'm suing server 2008 STD X64 with IIS7. I've made sure all my windows updates are done.
I've no idea whats causing this. I've tried removing the pages with reports on and I still get the same issue.
Im using Google Analytics Dashboard Control which are available at [URL] Issue is its working fine when im connected to internet but if im using it on a machine that doesnt have internet access then it shows Server Error in '/' Application. The remote name could not be resolved: '[URL]' I want to catch this exception and shows a friendly message to user. Im calling these dashboard control on my View in an iframe like this <iframe src="../../GoogleAnalytics/Visitor.aspx" height="275"></iframe> and if i place try catch in Visitor.aspx page it doesnot catch the exception. How should i catch this exception, Im using asp.net mvc 2 with c#
View 3 RepliesI have a heavy traffic aspx page calling a web service upon every user`s request as follows.
string uri = "Path.asmx";
string soap = "soap xml string";
HttpWebRequest request = (HttpWebRequest)WebRequest.Create(uri);
request.Headers.Add("SOAPAction", ""http://xxxxxx"");
request.ContentType = "text/xml;charset="utf-8"";
request.Accept = "text/xml";
request.Method = "POST";
using (Stream stm = request.GetRequestStream())
{
using (StreamWriter stmw = new StreamWriter(stm))
{
stmw.Write(soap);
}
}
WebResponse response = request.GetResponse();
response.close();
Everything is working fine but sometimes I am getting the following error. The remote server returned an error: (500) Internal Server Error. at System.Net.HttpWebRequest.GetResponse() Does anybody have any idea about this error or can anybody tell me if I am doing wrong.
I have a web application runs @ Windows 2008 R2, ASP.NET v4.0.
I installed the Url Rewrite Module, and started to use it as shown in the official examples.
My problem starts when the <rewrite> tag is added to the web.config under <system.webServer> - actually when I try to browse to any page under this current application, I get 500 - Internal server error.This is the <rewrite> block I've been adding:
<system.webServer>
<rewrite>
<rules> [code]....
I have my Website Application [URL]. How is it deploy my site to web server [ IIS ] so that it can be accessed via intranet.
View 1 RepliesI've called their tech support 3 times this morning and spent over $50 in long distance and have had no results. I was wondering if anybody here has deployed an ASP.NET website with DomainHut.com's hosting services. I've set up my database on their server correctly, all tables, stored procedures and aspnet schema are there just like on my local machine, and I have changed the connection string to point to the correct server, but when I publish the website using the publisher tool to upload the website to www.mhn.co/mhnprofessionalservices but I'm only getting an 500 Internal server error. They have advised me to set <CustomError Mode="on"/> in the Web.Config file, and I have <Compilation debug="false"/> as well.
View 1 RepliesI am publishing my website on server, using publish feature in VS 2010 Ultimate. but, how can i stop uploading images folder everytime i publish website.
View 2 Replies