I have built my site using VS.Net 2010 on my XP machine. I would like to deploy it to my server which is a Windows 2003 Server. I have tried to do it with FTP, but it keeps failing with the error that "Front Page Extensions are not installed on the web server". When I check the server the extensions were installed and I also checked IIS and the service for the extension is allowed.
View 6 Replies
I've been given a virtual dev environment being windows server 2003 and I need to publish a web app to it. I've deployed apps quite easily using the publishing wizard but I'm not sure how to do deploy to a windows server.. can someone please provide a link or a guide on how to do this as I need to set it all up and I really don't know where to start.
View 2 RepliesI need to deploy an asp.net 4 website on a windows server 2003 remote server. I have updated the server's .net framework to 4.0 and installed IIS 7. how to deploy the website because I have no idea how to.
View 4 RepliesI am getting the error -- Error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. Action WEBCA_FillComboBox, entry: FillComboBox, library: C:DOCUME~1ADMINI~1.XYZLOCALS~1TempMSI15B.tmp -- when I try to deploy a ASP.NET application on the server.I am using "Enablehostheaders.js" to select the website where I need to install the files..I am using visual studio.net 2003/framework 1.1
It is working fine in the development system..
I'm running windows 7, so I installed on my machine the oracle client version 11.1.0.7.0 (ODP.NET - Oracle.DataAccess version 2.111.7.20) .
I'm trying to deploy an asp.net web application to a server that is running windows 2003, which has the oracle client version 11.1.0.6.0 (ODP.NET - Oracle.DataAccess Version 2.111.6.20)
In my web.config file I have:
<add assembly="Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89B483F429C47342"/>
(which for my surprise it compiles just fine).
Now when I compile my application and deploy it in a setup project (as pre-compiled). The start page of my web app tires to connect to Oracle and it returns the following error message:
"Could not load file or assembly 'Oracle.DataAccess, Version=2.111.7.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified."
Which is super weird because, cause the web.config file as shown above has Version=2.111.6.20.
Now the strange part is that if I copy the source code from the client to the server, the same code, same config file, it works just fine.
So I'm thinking that the pre-compiled version is telling the server to load Oracle.DataAccess Version=2.111.7.20, maybe in one of the dlls, not in the config file for sure.
Has anyone run into this problem?
what's the best approach to deploy to servers with different oracle client version? (I have a similar problem trying to deploy to a 64 bit machine)
Can someone point me to a step-by-step guide on how to deploy ASP.Net applications to a totally empty and brand new Windows 2003 Server?The server has ASP.Net and the .Net framework installed on it. IIS is up and running. I have created a new application pool.
View 2 RepliesI have a project which involves a database (sql server 2008 express) class library, webservice and a website which I want to deploy on a windows server 2003 with IIS 6. I look ed on the web and how to do this for the website mostly but unfortunately not that much for the webservice, classlibrary and database.
View 1 RepliesI am trying to run an aspx file on my server windows 2003 with IIS 6.0. I get the following error. Server Error in '/' Application. Runtime Error Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local
server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
[Code]....
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
[Code]....
I developed an application using VS2010 and now when i try to deploy it on windows XP maching running IIS 5.1 i get the database version error which says:
The database '<database file path>' cannot be opened because it is version 655. This server supports version 612 and earlier. A downgrade path is not supported.
<database file path> . Create is aborted.
An attempt to attach an auto-named database for file <database file path> failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
i am trying to deploy the asp.net web application on windows 7 professional
i was getting error at <authentication mode="Windows"/>
if i commented the windows authentaction i get below error
Server Error in '/' Application.
--------------------------------------------------------------------------------
Parser Error
Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Could not load type 'crmpark.Login'.
Source Error:
Line 1: <%@ Page Language="vb" AutoEventWireup="false" CodeBehind="Login.aspx
i have aslo commented
[Code]...
I set up VS 2008 team suite on windows server 2003 ,and when I begin a new web site and try to run this website I have error saying
Error 61 Unrecognized configuration section system.serviceModel.
C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Configmachine.config 136
I tried to edit in Machine.config but It did't succeed
We have multiple websites deployed onto Windows 2003 WebServer running under .NET Framework 2.0 SP1 version and now we want to upgrade it to .NET Framework 2.0 SP2, so just wanted to check that after upgrading the .NET Framework on the server do we also need to re-deploy the websites by recompiling them in .NET Framwork 2.0 SP2 version or it's not necessary as they will automatically start referencing the latest assemblies?
View 2 RepliesI have developed a website in ASP.NET and deployed on IIS 6.0 server on windows Server 2003.I used asp.net 2.0,SQL server 2005,AJAX and javascript .It is working.The problem I have that this website is slow. How did I deployed website on IIS? I went to Build-->Publish Web Site and it then created a folder with all pages, I simply copied that folder on webserver and put path in IIS. Is that a correct way to deploy aps.net webite or not? let me know is any other best way to deploy website that can make my website faster.
View 3 RepliesHow to deploy Asp.net web site in IIS 6.0 my Environment is windows server 2003 64 bit and port ruining 81.
View 1 Replieswhen I deploy a website in IIS Windows Server 2003 R2 . First time deploy, it seemed no problem at all (fyi, the one who deploy for the first time is not me, but my friend) but after one or two days this problem occur. I can't browse from IIS and Internet Explorer. In Internet Explorer the page display:
"Internet Explorer cannot display the website." The worse, no error log data ever produced in Application category in Event Viewer.
I've tried change the address from localhost to 127.0.0.1 but the response is still the same. I even tried access just localhost alone. It should display the default homepage from IIS but the response is still the same too. I've checked IIS' Web Service Extension, the Active Server Pages and ASP.NET 2.0 are set to allowed. I also have tried make a virtual directory with just index.html inside and the response is still the same.
FYI: The server seems run in 64 bit (HP Proliant server). The website I build only used ASP.NET Ajax 1.0 and Crystal Report for VS 2005. From the server, I can access the internet but not the localhost.
I am trying to publish the website in windows 2003 server in my office. it is getting published in windows xp iis. not getting up in windows 2003.
View 5 RepliesI want to deploy asp.net 4.0 web site on windows server 2003, Now I already have a classic asp site running on it. Would there be any problem if I install .net 4.0 framework for my new site. Will the existing site (the one in classic asp) be affected?
View 2 Replies I have an application which is used by others on different server without problems. The app was programmed by a programmer who is not available now. It was developed on .net 2.0. The windows 2003 is a new server, asp.net is enabled. from iis, I can configure it to use asp.net 2.0....,
but, when I load the site, it always show the 404. even after I change the default.aspx to a blank page, it still shows 404. however, if I put a default.htm in the folder, and it can be loaded without problems.
what can cause this? how to fix it? if I installed a vs2005 express on the server, will it fix the problem?
it seems the asp.net 2.0 dll is not recognized on server. never had this problem before.
I'm deploying a web site to a server I've set up for testing. The website works great in development (Running in VS 2010) as well as in production on multiple client sites. I'm simply trying to test the site in a new environment. I simply copied the complete site (pages, code, directories, everything...) to my server. In IIS7 I created a new web site pointing to the directory containing my site's files and directories. I can open my site and my initial login page loads.
Database connections are made, page and buttons all seem great. Then, I log in. In the first line of code that attempts to instantiate an instance of a class contained in my App_Code folder, an exception is thrown, 'Invalid object name'. I've messed with as many settings as I could in IIS7 but to no avail. I've searched the internet on something regarding this, but nothing seemed to apply. At this point I'm about ready to install Visual Studio on my server to get it to run (this was the route one of the other developers took).
I have a website build with .Net 2.0 Framework, I tried to deploy it in iis 7 ( Windows Server 2008 ). I get the following error when i browse the project. Server Error in '/' Application. Security Exception Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file.
Exception Details: System.Security.SecurityException: Your application is not running with full trust. Please call AspxLab.WebControls.Runtime.Initialize to manually initialize AspxLab Controls runtime environment. Source Error:
[Code]....
Stack Trace:
[Code]....
[SecurityException: Your application is not running with full trust. Please call AspxLab.WebControls.Runtime.Initialize to manually initialize AspxLab Controls runtime environment.]
a..ctor() +540
az..cctor() +140
Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927
I have the same issue, I have added the On before the Application start, or Session Start and it is still not working.Application_OnStart or Application_Start is not firingSession_OnStart or Session_Start is not firing..Note that in my development environment it is firing (both of the names).When I am adding the Global.asax file, there is only one file (no .cs file). And when I am publishing the project, I am not getting the Global.asax file, I am getting a xxxxGlobal.asax.dll file on my bin folder...
View 1 RepliesWe are running asp.net website on windows server 2003 with framework 2.0 and asp.net ajax 1.0 extensions. now we planned to migrate websites to windows server 2008 r2. since my websites on framwork 2.0, I need to install same framework on windows server 2008 r2 but I didnt find 2.0 version for windows server 2008 r2. Is it possible to install 2.0 version on windows server 2008 r2 ??
View 1 RepliesI have to write a application which connects to remote server(windows 2003 server, open SQL Management studio in that server and enter a specific SQL Server address and access a stored procedure, change some values and execute the stored procedure.)
I have to write this application using C#.Net , Could anybody point me in right direction, Where do I start?
I have developed a website using visual studio. Now i want to deploy the same on server having windows server 2008 o.s. and IIS 7. When i copy the website and paste it into wwwroot folder of iis its not working. What settings need to be done so that website can be accessed from iis.
View 2 RepliesI am running a web application in vs-2008 on windows 2003 server.While execution of .net application, I am getting an error as"Unable to start debugging on the web server. Unable to connect to the web server. Verify that web server is running and that incoming HTTP requests are not blocked by firewall."
View 5 Replies
