Configuration :: "Server Error In '/' Application" When Run An Aspx File On Server Windows 2003 With IIS 6.0
Aug 9, 2010
I am trying to run an aspx file on my server windows 2003 with IIS 6.0. I get the following error. Server Error in '/' Application. Runtime Error Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local
server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
[Code]....
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
[Code]....
View 2 Replies
Mar 20, 2010
I have an application which is used by others on different server without problems. The app was programmed by a programmer who is not available now. It was developed on .net 2.0. The windows 2003 is a new server, asp.net is enabled. from iis, I can configure it to use asp.net 2.0....,
but, when I load the site, it always show the 404. even after I change the default.aspx to a blank page, it still shows 404. however, if I put a default.htm in the folder, and it can be loaded without problems.
what can cause this? how to fix it? if I installed a vs2005 express on the server, will it fix the problem?
it seems the asp.net 2.0 dll is not recognized on server. never had this problem before.
View 1 Replies
Jul 5, 2010
I set up VS 2008 team suite on windows server 2003 ,and when I begin a new web site and try to run this website I have error saying
Error 61 Unrecognized configuration section system.serviceModel.
C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Configmachine.config 136
I tried to edit in Machine.config but It did't succeed
View 5 Replies
Oct 31, 2010
I have built my site using VS.Net 2010 on my XP machine. I would like to deploy it to my server which is a Windows 2003 Server. I have tried to do it with FTP, but it keeps failing with the error that "Front Page Extensions are not installed on the web server". When I check the server the extensions were installed and I also checked IIS and the service for the extension is allowed.
View 6 Replies
Aug 17, 2010
I am getting the error -- Error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. Action WEBCA_FillComboBox, entry: FillComboBox, library: C:DOCUME~1ADMINI~1.XYZLOCALS~1TempMSI15B.tmp -- when I try to deploy a ASP.NET application on the server.I am using "Enablehostheaders.js" to select the website where I need to install the files..I am using visual studio.net 2003/framework 1.1
It is working fine in the development system..
View 4 Replies
Jan 17, 2011
I have to write a application which connects to remote server(windows 2003 server, open SQL Management studio in that server and enter a specific SQL Server address and access a stored procedure, change some values and execute the stored procedure.)
I have to write this application using C#.Net , Could anybody point me in right direction, Where do I start?
View 6 Replies
May 17, 2010
i am trying to install SQL Server R2 on my windows 2003 server (I downloaded the x64 version) but on the installation directory, just before i click next, to get the error, the path is as follows: C:ProgramFiles(x86)Microsoft Sql Server im not too sure if thats the problem though, just guessing, since i dont know anyother problem, and its a new server. I also tried multiple server restarts and still got the same error.
View 6 Replies
Oct 17, 2010
I've been given a virtual dev environment being windows server 2003 and I need to publish a web app to it. I've deployed apps quite easily using the publishing wizard but I'm not sure how to do deploy to a windows server.. can someone please provide a link or a guide on how to do this as I need to set it all up and I really don't know where to start.
View 2 Replies
Jul 7, 2010
I am running a web-site with simple .aspx files on a standalone workgroup Windows Server 2008 called 'Max'.I had assumed that the .aspx files were accessed by the 'Network Service' account.The application pool for the website is running with 'Network Service' as the process account.I was puzzled, since 'Network Service' had no permission on these files. So I added event level auditing to the files, and I was suprised to learn that the .aspx files were being accessed by an account called Max$ (ie the computer account).this correct ?Why is the Network Service account not being used ??
View 3 Replies
Oct 25, 2010
We have multiple websites deployed onto Windows 2003 WebServer running under .NET Framework 2.0 SP1 version and now we want to upgrade it to .NET Framework 2.0 SP2, so just wanted to check that after upgrading the .NET Framework on the server do we also need to re-deploy the websites by recompiling them in .NET Framwork 2.0 SP2 version or it's not necessary as they will automatically start referencing the latest assemblies?
View 2 Replies
Jun 8, 2010
I have developed a website in ASP.NET and deployed on IIS 6.0 server on windows Server 2003.I used asp.net 2.0,SQL server 2005,AJAX and javascript .It is working.The problem I have that this website is slow. How did I deployed website on IIS? I went to Build-->Publish Web Site and it then created a folder with all pages, I simply copied that folder on webserver and put path in IIS. Is that a correct way to deploy aps.net webite or not? let me know is any other best way to deploy website that can make my website faster.
View 3 Replies
Mar 30, 2011
when I deploy a website in IIS Windows Server 2003 R2 . First time deploy, it seemed no problem at all (fyi, the one who deploy for the first time is not me, but my friend) but after one or two days this problem occur. I can't browse from IIS and Internet Explorer. In Internet Explorer the page display:
"Internet Explorer cannot display the website." The worse, no error log data ever produced in Application category in Event Viewer.
I've tried change the address from localhost to 127.0.0.1 but the response is still the same. I even tried access just localhost alone. It should display the default homepage from IIS but the response is still the same too. I've checked IIS' Web Service Extension, the Active Server Pages and ASP.NET 2.0 are set to allowed. I also have tried make a virtual directory with just index.html inside and the response is still the same.
FYI: The server seems run in 64 bit (HP Proliant server). The website I build only used ASP.NET Ajax 1.0 and Crystal Report for VS 2005. From the server, I can access the internet but not the localhost.
View 2 Replies
Jun 3, 2010
I have the same issue, I have added the On before the Application start, or Session Start and it is still not working.Application_OnStart or Application_Start is not firingSession_OnStart or Session_Start is not firing..Note that in my development environment it is firing (both of the names).When I am adding the Global.asax file, there is only one file (no .cs file). And when I am publishing the project, I am not getting the Global.asax file, I am getting a xxxxGlobal.asax.dll file on my bin folder...
View 1 Replies
Feb 2, 2010
I am getting an error with my custom RoleProvider (based on System.Web.Security.RoleProvider) initializing in my ASP.NET application. The error is: "Description: An error occurred during the processing of a configuration file required to service this request." I see this below error happening on a Windows 2003 server with .NET 3.5 SP1. I have not seen it on Windows 2008 servers, and have not seen the error when the ASP.NET application was built under .NET 2.0 (running on this same server). Any thoughts on the nature of the error?
Classification: UNCLASSIFIED
Caveats: NONE
Server Error in '/Assist' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: FrameworkRoleProvider_Initialize
Source Error:
Line 122: <clear />
Line 123: <add
Line 124: type="Grb.Security.FrameworkRoleProvider"
Line 125: applicationName="MyApplication1" />
Line 126: </providers>
Source File: D:inetpubAssistweb.config Line: 124
Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3082
HERE'S THE INITIALIZING FUNCTION FOR THE ROLE PROVIDER:
Public Overloads Overrides Sub Initialize(ByVal name As String, ByVal config As System.Collections.Specialized.NameValueCollection)
Try
If config Is Nothing Then
Throw New ArgumentNullException("config")
End If
If String.IsNullOrEmpty(name) Then
name = Me.GetType().BaseType.Name
End If
If String.IsNullOrEmpty(config(DescriptionKey)) Then
config.Remove(DescriptionKey)
config.Add(DescriptionKey, SR.GetString(SR.RoleSqlProvider_description))
End If
MyBase.Initialize(name, config)
' Get the configuration settings
Dim configurationSettings1 As Grb.Framework.Business.ConfigurationSettings = Grb.Framework.Business.FrameworkConfiguration.GetConfiguration()
' Load the DomainManager
Dim dataManager1 As New Grb.Framework.Data.Main(Nothing, configurationSettings1.FrameworkSchema, configurationSettings1.AssistSchema, _
configurationSettings1.ConnectionString, configurationSettings1.ProviderInvariantName, _
configurationSettings1.EnablePerformanceLogging, System.Web.HttpContext.Current.Request.PhysicalApplicationPath)
' Load the DomainManager
Dim frameworkDomainManager As Grb.Framework.Business.DomainManager = New Grb.Framework.Business.DomainManager(dataManager1, -1, -1)
m_ProductDomainManager = New Grb.PlugIn.Assist.Business.DomainManager(dataManager1, frameworkDomainManager)
m_ApplicationName = config(ApplicationNameKey)
If String.IsNullOrEmpty(m_ApplicationName) Then
m_ApplicationName = SecUtility.GetDefaultAppName()
End If
If m_ApplicationName.Length > 256 Then
Throw New System.Configuration.Provider.ProviderException(SR.GetString(SR.Provider_application_name_too_long))
End If
config.Remove(ApplicationNameKey)
If config.Count > 0 Then
Dim attribUnrecognized As String = config.GetKey(0)
If Not String.IsNullOrEmpty(attribUnrecognized) Then
Throw New System.Configuration.Provider.ProviderException(SR.GetString(SR.Provider_unrecognized_attribute, attribUnrecognized))
End If
End If
Catch ex As Exception
Throw New Grb.Framework.Core.Exceptions.FrameworkBusinessException( _
Resources.ExceptionMessages.FrameworkRoleProvider_Initialize, ex)
End Try
End Sub
WEB.CONFIG:
<?xml version="1.0"?>
<configuration>
<configSections>
<sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"
/>
<sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere" />
<section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"
/>
<section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"
/>
<section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" />
</sectionGroup>
</sectionGroup>
</sectionGroup>
</configSections>
<connectionStrings>
<!-- example: <add name="ConnectionString" value="Data Source=MyServer;User Id=GRB_WEB_USER_10;Password=temp;" providerName="Oracle.DataAccess.Client" /> -->
<add name="FrameworkConnection" connectionString="Data Source=;User Id=;Password=;" providerName="Oracle.DataAccess.Client"/>
</connectionStrings>
<appSettings>
<!-- example: <add key="FrameworkSchema" value="GRB_FRAMEWORK_2" /> -->
<add key="FrameworkSchema" value="" />
<!-- example: <add key="AssistSchema" value="GRB_ASSIST_2" /> -->
<add key="AssistSchema" value="" />
<add key="FromEmail" value="support@myagency.com" />
<add key="PasswordCreateEmailSubject" value="GRB Assist Create Password" />
<add key="PasswordEstablishOrChangeEmailSubject" value="GRB Assist Established or Changed Password" />
<add key="PasswordForgotEmailSubject" value="GRB Assist Forgot Password" />
<add key="Timeout" value="60" />
<add key="RequiresSsl" value="False"/>
<!-- Email digital signing Pfx (certificate) -->
<add key="EmailSigningSignUsingCertificateFromPersonalStore" value="False" />
<add key="EmailSigningPfxFilePathAndName" value="" />
<add key="EmailSigningPfxPassword" value="" />
</appSettings>
<system.web>
<customErrors mode="Off"/>
<pages>
<controls>
<add tagPrefix="aspajax" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add tagPrefix="ajaxToolkit" namespace="AjaxControlToolkit" assembly="AjaxControlToolkit" />
<add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
</controls>
<tagMapping>
</tagMapping>
</pages>
<!--
Set compilation debug="true" to insert debugging symbols into the compiled page. Because this affects performance, set this value to true only during development.
-->
<compilation defaultLanguage="vb" debug="false">
<assemblies>
</assemblies>
</compilation>
<httpHandlers>
<remove verb="*" path="*.asmx"/>
<add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false" />
<add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
</httpHandlers>
<httpModules>
<add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
</httpModules>
<!-- 1 GB maxRequestLength -->
<httpRuntime maxRequestLength="1048576" />
<sessionState mode="InProc" timeout="60" />
<!-- note: Set authentication timeout >= session timeout (session timeout will clear authentication timeout upon session_start) -->
<!-- note: <forms name="xxxx" value must be unique for each "forms authenticated" web application run on an IIS web server -->
<!-- note: For a more secure system, set requiresSSL="true" (and install/setup an SSL key on the web site) -->
<authentication mode="Forms">
<forms loginUrl="TimedOut.aspx" slidingExpiration="false" requireSSL="false" timeout="60"/>
</authentication>
<authorization>
<deny users="?"/>
<allow users="*"/>
</authorization>
<membership defaultProvider="FrameworkMembershipProvider1" userIsOnlineTimeWindow="15">
<providers>
<clear />
<add
name="FrameworkMembershipProvider1"
type="Grb.Security.FrameworkMembershipProvider"
applicationName="Product1"
passwordRetrieval="false"
passwordReset="true"
requiresQuestionAndAnswer="false"
requiresUniqueEmail="true"
passwordFormat="Hashed"
minRequiredNonalphanumericCharacters="0"
minRequiredPasswordLength="4"
passwordStrengthRegularExpression="^[a-zA-Z0-9]+$"
passwordStrengthFailedMessage="The password must be only alpha-numeric characters."
frameworkDomainName="Master"
maximumInvalidPasswordAttempts="3"
maximumInvalidPasswordAttemptLockoutMinutes="30"/>
</providers>
</membership>
<roleManager enabled="true" defaultProvider="FrameworkRoleProvider1">
<providers>
<clear />
<add name="FrameworkRoleProvider1"
type="Grb.Security.FrameworkRoleProvider"
applicationName="MyApplication1" />
</providers>
</roleManager>
</system.web>
<system.web.extensions>
<scripting>
<webServices>
<!-- Uncomment this line to customize maxJsonLength and add a custom converter -->
<!--
<jsonSerialization maxJsonLength="500">
<converters>
<add name="ConvertMe" type="Acme.SubAcme.ConvertMeTypeConverter"/>
</converters>
</jsonSerialization>
-->
<!-- Uncomment this line to enable the authentication service. Include requireSSL="true" if appropriate. -->
<!--
<authenticationService enabled="true" requireSSL = "true|false"/>
-->
<!-- Uncomment these lines to enable the profile service. To allow profile properties to be retrieved and modified in ASP.NET AJAX applications, you need to add each property name to the readAccessProperties and writeAccessProperties attributes. -->
<!--
<profileService enabled="true"
readAccessProperties="propertyname1,propertyname2"
writeAccessProperties="propertyname1,propertyname2" />
-->
</webServices>
<!--
<scriptResourceHandler enableCompression="true" enableCaching="true" />
-->
</scripting>
</system.web.extensions>
<system.webServer>
<validation validateIntegratedModeConfiguration="false"/>
<modules>
<remove name="ScriptModule" />
<add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
</modules>
<handlers>
<remove name="WebServiceHandlerFactory-Integrated" />
<remove name="ScriptHandlerFactory" />
<remove name="ScriptHandlerFactoryAppServices" />
<remove name="ScriptResource" />
<remove name="WebServiceHandlerFactory-ISAPI-2.0"/>
<add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"
/>
<add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
</handlers>
</system.webServer>
<location path="Default.aspx">
<system.web>
<authorization>
<allow users="*"/>
</authorization>
</system.web>
</location>
<location path="Portal.aspx">
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</location>
<location path="Login.aspx">
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</location>
<location path="PasswordChange.aspx">
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</location>
<location path="PasswordForgot.aspx">
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</location>
<location path="PasswordEntry.aspx">
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</location>
<!-- Give ControlLoader.aspx full access and let it check session/authentication validation.
The rational is that if a user is "timed-out" and presses a button to load a control into ControlLoader, the ControlLoader validation will catch this condition and tell the parent page to reload (so the Login page doesn't appear in the modal-dialog).
-->
<location path="ControlLoader.aspx">
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</location>
<location path="Documents/AccountServices.aspx">
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</location>
<location path="Documents/TermsOfUse.aspx">
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</location>
<location path="SystemAlertService.asmx">
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</location>
<system.net>
<mailSettings>
<smtp from="[URL]">
<!-- example: host="[URL]-->
<network
host=""
port="25"
defaultCredentials="true" />
</smtp>
</mailSettings>
</system.net>
</configuration>
View 1 Replies
