Can someone point me to a step-by-step guide on how to deploy ASP.Net applications to a totally empty and brand new Windows 2003 Server?The server has ASP.Net and the .Net framework installed on it. IIS is up and running. I have created a new application pool.
View 2 Replies
How to deploy Asp.net web site in IIS 6.0 my Environment is windows server 2003 64 bit and port ruining 81.
View 1 RepliesI want to deploy asp.net 4.0 web site on windows server 2003, Now I already have a classic asp site running on it. Would there be any problem if I install .net 4.0 framework for my new site. Will the existing site (the one in classic asp) be affected?
View 2 RepliesI'm trying to deploy my MVC 2.0 web application to a Windows 2003 server with IIS6, and can't find the means to do it. I read about clicking Build/Deploy, but I don't have this showing on my menu, and I have the professional version.
View 1 RepliesI have built my site using VS.Net 2010 on my XP machine. I would like to deploy it to my server which is a Windows 2003 Server. I have tried to do it with FTP, but it keeps failing with the error that "Front Page Extensions are not installed on the web server". When I check the server the extensions were installed and I also checked IIS and the service for the extension is allowed.
View 6 Replieshow to deploy an ASP.NET2.0 website on Windows server 2003 & IIS 6.0.
I tried to follow these steps but I get the message "Internet Explorer cannot display the webpage".
1. Create a new website in IIS with a host header.
2. Browse to the directory where the asp.net website is and setting it as home directory.
3. Stopping the website and starting it.
I am using Visual studio 2005 to develop my Asp.net website.
i havemy application developed in asp.net 3.5 with sqlserver 2005.
i have directories as following
UOGERP->Default.aspx
whole code is in UOGERP except default page.now i want to deploy it on windowserver2003 which i setup on intel Xeon machine.
i use to publish web site using visual studio.in following manner.i created a directory in c:Inetpubwwwroot named HRM and then publish in it using VS.then i go to iis and right click on defaultWebsites and then new websites. in description I Wrote HRM.than press next button and than give the path asC:InetpubwwwrootUOGERP.
than right click on HRM in IIs And take properties of folder.tham in asp.net tab select version to 2.77897 some thing.than in document tab add default.apsx .but it gives some time error 404 and some time error 403.
I am trying to run an aspx file on my server windows 2003 with IIS 6.0. I get the following error. Server Error in '/' Application. Runtime Error Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local
server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
[Code]....
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
[Code]....
I've been given a virtual dev environment being windows server 2003 and I need to publish a web app to it. I've deployed apps quite easily using the publishing wizard but I'm not sure how to do deploy to a windows server.. can someone please provide a link or a guide on how to do this as I need to set it all up and I really don't know where to start.
View 2 RepliesI set up VS 2008 team suite on windows server 2003 ,and when I begin a new web site and try to run this website I have error saying
Error 61 Unrecognized configuration section system.serviceModel.
C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Configmachine.config 136
I tried to edit in Machine.config but It did't succeed
We have multiple websites deployed onto Windows 2003 WebServer running under .NET Framework 2.0 SP1 version and now we want to upgrade it to .NET Framework 2.0 SP2, so just wanted to check that after upgrading the .NET Framework on the server do we also need to re-deploy the websites by recompiling them in .NET Framwork 2.0 SP2 version or it's not necessary as they will automatically start referencing the latest assemblies?
View 2 RepliesI have developed a website in ASP.NET and deployed on IIS 6.0 server on windows Server 2003.I used asp.net 2.0,SQL server 2005,AJAX and javascript .It is working.The problem I have that this website is slow. How did I deployed website on IIS? I went to Build-->Publish Web Site and it then created a folder with all pages, I simply copied that folder on webserver and put path in IIS. Is that a correct way to deploy aps.net webite or not? let me know is any other best way to deploy website that can make my website faster.
View 3 RepliesI need to deploy an asp.net 4 website on a windows server 2003 remote server. I have updated the server's .net framework to 4.0 and installed IIS 7. how to deploy the website because I have no idea how to.
View 4 Replieswhen I deploy a website in IIS Windows Server 2003 R2 . First time deploy, it seemed no problem at all (fyi, the one who deploy for the first time is not me, but my friend) but after one or two days this problem occur. I can't browse from IIS and Internet Explorer. In Internet Explorer the page display:
"Internet Explorer cannot display the website." The worse, no error log data ever produced in Application category in Event Viewer.
I've tried change the address from localhost to 127.0.0.1 but the response is still the same. I even tried access just localhost alone. It should display the default homepage from IIS but the response is still the same too. I've checked IIS' Web Service Extension, the Active Server Pages and ASP.NET 2.0 are set to allowed. I also have tried make a virtual directory with just index.html inside and the response is still the same.
FYI: The server seems run in 64 bit (HP Proliant server). The website I build only used ASP.NET Ajax 1.0 and Crystal Report for VS 2005. From the server, I can access the internet but not the localhost.
I am trying to publish the website in windows 2003 server in my office. it is getting published in windows xp iis. not getting up in windows 2003.
View 5 Replies I have an application which is used by others on different server without problems. The app was programmed by a programmer who is not available now. It was developed on .net 2.0. The windows 2003 is a new server, asp.net is enabled. from iis, I can configure it to use asp.net 2.0....,
but, when I load the site, it always show the 404. even after I change the default.aspx to a blank page, it still shows 404. however, if I put a default.htm in the folder, and it can be loaded without problems.
what can cause this? how to fix it? if I installed a vs2005 express on the server, will it fix the problem?
it seems the asp.net 2.0 dll is not recognized on server. never had this problem before.
I am getting the error -- Error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. Action WEBCA_FillComboBox, entry: FillComboBox, library: C:DOCUME~1ADMINI~1.XYZLOCALS~1TempMSI15B.tmp -- when I try to deploy a ASP.NET application on the server.I am using "Enablehostheaders.js" to select the website where I need to install the files..I am using visual studio.net 2003/framework 1.1
It is working fine in the development system..
I have the same issue, I have added the On before the Application start, or Session Start and it is still not working.Application_OnStart or Application_Start is not firingSession_OnStart or Session_Start is not firing..Note that in my development environment it is firing (both of the names).When I am adding the Global.asax file, there is only one file (no .cs file). And when I am publishing the project, I am not getting the Global.asax file, I am getting a xxxxGlobal.asax.dll file on my bin folder...
View 1 RepliesWe are running asp.net website on windows server 2003 with framework 2.0 and asp.net ajax 1.0 extensions. now we planned to migrate websites to windows server 2008 r2. since my websites on framwork 2.0, I need to install same framework on windows server 2008 r2 but I didnt find 2.0 version for windows server 2008 r2. Is it possible to install 2.0 version on windows server 2008 r2 ??
View 1 RepliesI have to write a application which connects to remote server(windows 2003 server, open SQL Management studio in that server and enter a specific SQL Server address and access a stored procedure, change some values and execute the stored procedure.)
I have to write this application using C#.Net , Could anybody point me in right direction, Where do I start?
I am running a web application in vs-2008 on windows 2003 server.While execution of .net application, I am getting an error as"Unable to start debugging on the web server. Unable to connect to the web server. Verify that web server is running and that incoming HTTP requests are not blocked by firewall."
View 5 RepliesI am installing MS Visual Studio 2010 on my PC and will develop website on it. I have developed my old asp.net websites on MS Visual Studio2005.Our webserver where we publish our websites on Windows Server 2003.I want to know that whether we can publish websites develop in MS Visual Studio 2010 on Windows Server 2003?
View 4 RepliesI have developed web application i need to deploy it on remote server.i am using asp.net 3.5 ,c# 3.0 and visual studio 2008,sql server 2005.using visual studio 2008 how i can make msi file to deploy application on server
View 5 RepliesI have developed a web application with ASP.Net 2.0 (VB Code Behind) and I am using My SQL as database.
I wish to sell the web application from my other website to multiple users. What would you suggest to be the best way to deliver this application? Fact is I can compile the front end script and provide the compiled version but I am not sure how to provide the associated MySQL database to them. I need to make sure that the buyers are not able to alter any code in the application or modify the preset data in the MySQL database. I do not wish to use the Setup Based deployment method as it will require the buyers to have administrative rights on the server, which may not be available on shared hosting.
But at the same time they must be able to get the web application up and running with minimal effort. I must be honest with you that I have developed only HTML based static websites till now and this would the first time I am launching an ASP.Net application.
for the last couple of days i've been trying to deploy an application that uses a sql express db on to my iis.up until now i was trying to upload it onto iis 5.1, but now i a brand new iis7.5 but i still get this annoying error:An attempt to attach an auto-named database for file C:application_nameApp_DataDatabase1.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.needless to say that there is no database with this name on my computer. i've set the application pool to .net framework 4.0.
View 2 Replies
