I did a smalll project in asp.net C# and Backend in Sqlserver2005.
I want that to upload my project on Internet, I have a domain name and i want to add a link (PROJECT) on clicking this link my project is going alive.
I want to publish an asp.net 4.0 project to a hosting site. I uploaded the three SiteMaster files and the three default files. It has an error on the first line of the SiteMaster.aspx. The error message was "Could not load type 'PorjectName.SiteMaster'." What files should I upload?
View 5 RepliesI am Rupesh B S. I am going to upload my first asp.net project on internet server. I have a doubt on uploading area. In my computer I installed - Visual Studio 2010 SQL Server 2008 No IIS Installed by myself My first doubts is Because of not installing IIS in my computer while I was developing my project and I did not stored Project folder in "inetpubwwwroot" Folder, will it cause any problem on running my project on internet. In My computer, my project is working smoothly Now.
My Second Doubt: Under which folder in server I should upload my project folder. area showing in my hosting server control panel. My Third Doubt: Anything I have to configure such as database for to upload in server b4 uploading my project folder into the server? MY Fourth Doubt: Just upload my project folder as it is as it in my computer - Right?
I have one asp.net application which is successfully runnig in hosting...Now we have one more hosting provider there also we deployed the same application..But in our old hosting all the pages are load very quick compare to new hosting.. so i need to see the difference why it load page very slow in new hosting...?So how can we check that its a server problem (or) Traffic (or) network problem (or) any other..
View 14 RepliesI'm trying to upload an asp .net application
View 3 RepliesI have developed a web application in asp.net with c# with out using master page. I have developed this application in iframe.
The problem is that my application run smoothly but suddenly it stops and do some processing and it run again smoothly.
it stops any where on page load, on button click, on checkbox changed. i can not tell where it stops
it stops only when page post. i can see the processbar on browser's statusbar it stop for long time 40 to 60 seconds and after that i fire same event now process complets within 2 to 5 seconds
Hosting server detail :
1. IIS 6.0
2. Window server 2003.
3. Sql server 2005.
Normally my application is working fine.After I host my asp application on IIS I get an exception "internal error", when I try to execute the below lines of code.
where CertificatePath = C:inetpubwwwroot......
X509Certificate2 cert = new X509Certificate2(CertificatePath, CertificatePassword);
var serviceManagment = ServiceManagementHelper.CreateServiceManagementChannel(EndpointConfigurationName, cert); var listServices = serviceManagment.ListHostedServices(SubscriptionId);
I suppose the application is not able to read the IIS certificate.I am trying to connect to windows azure cloud for which the certificate is required to get list of hosted services from cloud.
Stack trace -
StackTrace = " at System.Security.Cryptography.CryptographicException.ThrowCryptographicException(Int32 hr) at System.Security.Cryptography.X509Certificates.X509Utils._LoadCertFromFile(String fileName, IntPtr password, UInt32 dwFlags, Boolean persistKeySet, Safe...
i have develop my silver light application using asp.net and i want to deploy it , i am using vs 2010 and planing to use vsweb deployment project 2010 for beta
View 1 RepliesMy machine is having Windows XP service pack 2 and IIS 5.1 how to host the asp.net mobile application website.
We cannot create a new site in iis 5.1.Even though i did some settings by following the same settings for windows 7 but it is not working.
Also provide any links which illustrate mobile website hosting settings.
is the hosting settings differ from mobile to mobile.Our application is designed for iPhone.
i ..need complete flow of application hosting procedure and how to configure IIS
View 2 RepliesError on deploy application with SqlServerCe 4.0 on hosting service
View 4 Repliesif uploaded my hole web application to arvixe hosting company then when i try to run it it give me the following error (Does any one know what it is that i should do)
[Code]....
I want to make a set up project which would install, .net framework, sql server 2008, configure my website in IIS.
View 2 Replieswhen developing in my pc , all is fine , but when upload to hosting , it show error ~
[img]http://image.love9cube.net/images/sadsadcgc.jpg[/img]
As i have one upcoming project, i need to which is best
1) Asp.net MVC or asp.net 3.5 to develop let me know which is best and why its best..?
2) Is Asp.net MVC is available in Visual Studio 2005 and Asp.net MVC support sql server 2008 R2 ...?
3) Is Asp.net MVC framework is installed in hosting to run my web app..?
I have created 2 projects in a solution. One project contains Asp.net classes with login page and different other pages.
Another project contains a web service.
When I launch the solution(click F6 in visual studio 2008) the login page can access to the method of the webservice. Both projects are launched.
However when i added this 2 projects into IIS and deploy them (with create command) the login page cannot contact the method of the web service. Even though the web service is running because i can acces it manually. But they cannot communicate each other.
I'm trying create unit testing for an existing website project (not web application project). I cannot access my under test classes unless I use accessor. However, if I use accessor, I have problem to initiate an object with passing arguments. I only want to create unit tetsing for App_Code. After searching web, and I found that I'd better to create a web application project using my current existing website project. From solution explorer, add new project ->using existing website. My questions is: what impact will have for my current website to create the new project? Should I just convert my current website to web application? If do that, will it cuase problems on my website? I am new on asp.net, still learning..
View 1 RepliesI just converted an ASP.NET Web Site Project to a Web Application Project in VS 2010. After I run the application though it seems that my class polymorphism broke. I don't have a clue as to why this could occur.
So in the following code when I call base.OnLoad(e) I am getting errors in the base class because the variable myString is null. In fact all the variables for the Base class are null. I can do
[code]....
I recently updated my VS2010 website project from .NET 3.5 to 4.0. Everything was working fine in the website project. Today I decided to migrate the website to a web application project as I have learned this is the best way to work in .NET. I split out all my class files into a separate class library and copied all my other content into my new project. Then I updated all the references and web.config.
When I build the class library, everything works great. The problem is happening when I try to build/debug the web application project. It is acting like all the controls are missing and it is also throwing a bunch of compile errors about the public properties I have in my master pages.
Control errors: "The name 'INSERT CONTROL NAME HERE' does not exist in the current context"
Master page errors:'System.Web.UI.MasterPage' does not contain a definition....
It is giving these errors for every single control and master page property in my entire solution.I notice when I add a new web.form to this project, it also adds a filename.aspx.designer.cs file in addition to the .aspx and .aspx.cs file. My existing files do not have these extra files since they were created in a different .NET version.
UPDATE: It seems I was missing the step where I need to right click on the new application folder and select "Convert to web application". I just did that and it seems to be a little bit better...
Now it is choking on Literals that are inside single quotes:
<div class='<asp:Literal ID="CssClassLiteral" runat="server"></asp:Literal>'>
It doesn't see this literal when it does the conversion... Is the above valid code or should I implement that functionality another way?
I hope, the post is posted where it should be posted.I want to host my website on my IIS webserver so that I can access it on Internet. Could someone provide links for it.
View 13 RepliesI was not able to do unit testing for our existing web site project. I converted the web site project to a web application project. I did some unit testing and changes on the converted web application project. However, my co-worker was doing UI testing on the web site project. We need put UI testing and unit testing to the web application project. Is it possible to move the UI testing code that my co-worker did to the web application project I am working? If so, how do you do it?
View 2 RepliesI don't have any experience in web hosting. Recently I've completed developing my Asp.net website using Visual Studio 2010. The website retrieves financial data from Yahoo! Finance, does analytical calculations in code-behind, stores processed data into several databases, and allows users to analyze the stock market using those data. Currently I need to run some programs in Visual Studio so that new data get downloaded every day.
My problem is that I know nothing about how to do web hosting so I can actually get my website on the Internet. I heard that there are third-party web site hosting services, but do they allow you to upload entire Asp.net web pages with all the databases attached? What if I need to go in there, run some programs, and update some data in the databases, do these web hosting services allow me to do that?
If the answers to the above are yes, what are some good web hosting services that allow you to upload (I don't even know if "upload" is the correct term to use) Asp.Net web pages? By the way, my website is coded in Visual Basic, if it makes any difference.
When i enter valid username and password into a default mvc 2 app hosted on my local IIS 7.5 server i get this response.
Server Error in '/MyApp' Application.
Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed.
Stack Trace: [Code]....
First time i m doing hosting and uploading of web application.can any one guide about the procedure.
View 3 RepliesI have created website in Visual Studio using asp.net C#, and host the website in IIS.
Now i want when i right click the website in IIS and select browse, page will get executed, but this is not happening with my case, when i browse the website it shows all the content of website which i created in Visual studio, as shown below
To parent directory
3/29/2011 4:55 AM <dir> App_Data
3/29/2011 4:55 AM <dir> bin
3/29/2011 4:55 AM 528 pageName.aspx
3/29/2011 4:55 AM 1234 pageName.aspx.cs
3/29/2011 4:55 AM 1144 pageName.aspx.designer.cs
3/29/2011 4:55 AM 4393 pageName.csproj
3/29/2011 4:55 AM 1288 pageName.aspx.user
3/29/2011 4:55 AM <dir> obj
3/29/2011 4:55 AM <dir> properties
3/29/2011 4:55 AM 7469 web.config
when i click on 3/29/2011 4:55 AM 528 pageName.aspx, page will get executed.
But what i wanted , when i browse the website , this page "3/29/2011 4:55 AM 528 pageName.aspx" will get executed automatically, i do not suppose to click on 3/29/2011 4:55 AM 528 pageName.aspx page manually