How To Move An UI Testing For A Website Project To A Web Application Project
Oct 6, 2010
I was not able to do unit testing for our existing web site project. I converted the web site project to a web application project. I did some unit testing and changes on the converted web application project. However, my co-worker was doing UI testing on the web site project. We need put UI testing and unit testing to the web application project. Is it possible to move the UI testing code that my co-worker did to the web application project I am working? If so, how do you do it?
View 2 Replies
Similar Messages:
Mar 11, 2010
I'm trying create unit testing for an existing website project (not web application project). I cannot access my under test classes unless I use accessor. However, if I use accessor, I have problem to initiate an object with passing arguments. I only want to create unit tetsing for App_Code. After searching web, and I found that I'd better to create a web application project using my current existing website project. From solution explorer, add new project ->using existing website. My questions is: what impact will have for my current website to create the new project? Should I just convert my current website to web application? If do that, will it cuase problems on my website? I am new on asp.net, still learning..
View 1 Replies
Oct 24, 2010
I just converted an ASP.NET Web Site Project to a Web Application Project in VS 2010. After I run the application though it seems that my class polymorphism broke. I don't have a clue as to why this could occur.
So in the following code when I call base.OnLoad(e) I am getting errors in the base class because the variable myString is null. In fact all the variables for the Base class are null. I can do
[code]....
View 1 Replies
Mar 29, 2011
I recently updated my VS2010 website project from .NET 3.5 to 4.0. Everything was working fine in the website project. Today I decided to migrate the website to a web application project as I have learned this is the best way to work in .NET. I split out all my class files into a separate class library and copied all my other content into my new project. Then I updated all the references and web.config.
When I build the class library, everything works great. The problem is happening when I try to build/debug the web application project. It is acting like all the controls are missing and it is also throwing a bunch of compile errors about the public properties I have in my master pages.
Control errors: "The name 'INSERT CONTROL NAME HERE' does not exist in the current context"
Master page errors:'System.Web.UI.MasterPage' does not contain a definition....
It is giving these errors for every single control and master page property in my entire solution.I notice when I add a new web.form to this project, it also adds a filename.aspx.designer.cs file in addition to the .aspx and .aspx.cs file. My existing files do not have these extra files since they were created in a different .NET version.
UPDATE: It seems I was missing the step where I need to right click on the new application folder and select "Convert to web application". I just did that and it seems to be a little bit better...
Now it is choking on Literals that are inside single quotes:
<div class='<asp:Literal ID="CssClassLiteral" runat="server"></asp:Literal>'>
It doesn't see this literal when it does the conversion... Is the above valid code or should I implement that functionality another way?
View 1 Replies
Mar 11, 2011
What is the difference between Web Application Project and Web Site Project ?
View 6 Replies
Mar 2, 2010
I want to create a unit testing project for my existing websiet which is written in VB. When I try to add a unit testing , no place I can select c#. It always create in VB. How can i add a c# unit testing project for it?
I am using visual studio professional 2008
View 2 Replies
Jun 20, 2010
I've created a new vs.net project and added all the files from an asp.net website project.
When I compile, it couldn't find a reference to a class.
In the AppCode the class was defined, but without a namespace.
So I added a namespace, and then on the default.aspx.cs (this is where the error was originating) I added the using statement.
The using statement was not picking up the namespace.
View 3 Replies
Sep 29, 2010
When I start a new ASP.NET project in Visual Studio 2010, I can either create a new ASP.NET Web Site or an ASP.NET Web Application. What's the difference between these two project types? Why would I choose one over the other?
note: this question is an exact duplicate of this one, but I'm asking specifically about Visual Studio 2010 (there are no answers targeted at VS 2010 in the original question). So are the answers of the other question still valid or are there any changes with VS2010 which results in different answers?
View 1 Replies
Mar 30, 2011
I've got two projects: a .Net 4.0 Console Application and an Asp.Net 4.0 Website (they are in the same solution). Now I'd like to include the console application (its .exe) in the web application, because I need to run it on the server when the user clicks on a certain button.
Now I would like to include it in a way that the console application will be updated whenever I recompile the solution, so it stays up to date.
So... how can I include my .exe in my web app?
View 2 Replies
Jul 17, 2010
there is already an asp.net web site developed,now due to certain requirements i want to use silverlight enabled pages in my project(for its flexible designing purpose).
View 2 Replies
May 23, 2010
When I turn on Code Coverage in my test settings, on a project that references the Unity DI container I get the following error:
Cannot initialize the ASP.NET project'{Project Name}'.
The event log specifies the following reason:
Could not load file or assembly 'Microsoft.Practices.Unity, Version=2.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. Strong name signature could not be verified.
View 2 Replies
Jun 22, 2010
I got this error in a project I did a while back. I think this was a web site project that i converted to a web app project. This was a while ago. This is an app I'm trying to run on my local machine. I'm not using IIS.
Does anyone know what this means?
Error 2
It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
C:UsersKristDocumentsVisual Studio 2008ProjectsWeb AppsKrist Woodard .net tabbedWebApplication1WebApplication1Web.config 46
View 2 Replies
Oct 8, 2010
When I make an asp.net web application and add class libraries to the solution, the website project itself has a folder with the same name/contents as the class library.
Eg I make a web application called Test, add a project which is a class library, to the solution, called testAbc, and then there is a folder at the root of the website project called testAbc with the contents of the class lib.
View 4 Replies
Feb 14, 2010
When I make an asp.net web application and add class libraries to the solution, the website project itself has a folder with the same name/contents as the class library.
Eg I make a web application called Test, add a project which is a class library, to the solution, called testAbc, and then there is a folder at the root of the website project called testAbc with the contents of the class lib.
I read why this happens in a book a while ago but can't quite remember now.
View 1 Replies
Feb 3, 2011
I have used .net framework 4.0 to design my web project I want to improve some features on my web site and I decided to use MVC in my project.
I research about mvc I found out System.Web.Routing in .net framework 3.5 is wrapped by System.Web in .net framework 4.0.
In the other side in my host environment I have IIS 7.0 with all necessarily handlers mapped to .aspx and some other extension like .cshtml and support them.
So I think I have all thing for mvc migration. my question is :
Is it possible to move mvc by configure web.config and make some structure for content, view and controller classes but don't change any asp.net pages and configuration like appcode and appdata which I had before in my asp.net application.
Note, I don't want to change or update my old application to mvc I want to add some mvc controllers class and view to my existing asp.net project to use mvc functionality.
View 1 Replies
Mar 10, 2010
I have created a service project in VS 2005 that is ready for test. What files do I need to move to the test box from my project build?
View 9 Replies
May 3, 2010
I have moved my entire project to my test server, everything went as planned with the exception of a couple of items. The main one that I'm having troubles with deals with subfolders of the website. On my local computer I created a my project then I created a sub folder, Secure, so that I can work with the security on the sub folder via ASP.NET configuration. I wanted only certain users to be able to access the folder, which works on my local computer, but when I try to navigate to it on my test server, I get a 404 error. I create two Roles on my local computer, but don't know if I'm able to make those roles on my test server. Is there a way to make those roles so that the security that I have on the sub folder will allow them to be displayed. Not certain why I get a 404 error.
View 3 Replies
Oct 6, 2010
I have to admit first, that for the last few years, I've been mostly an MVP guy versus MVC. However, how I used to implement MVP is very similar to how MVC 2 is now implemented. I only have one issue with it...When I used to create MVP apps, I could put all my logic (presenters, models) into separate assemblies/projects in the solution and my views into the main web app. This allows me to change the UI (i.e. the web based UI) to something else like a smart client or Silverlight or whatever and still have everything just work. With MVC 2, everything is all in the same project: controllers, views, models. Areas looked like a good start, but ultimately, not what I was looking for.So, here's my question... How do I move the controllers and models out of the web project and into their own projects and still have everything work? A good, simple example would be the default MVC 2 web application template. When you open a new (non-empty) MVC web application, it creates a basic site for you. From there, how could I move the controllers and models in separate projects and still have everything just work? I can't seem to find anything on this anywhere else which has brought me here
View 13 Replies
Nov 19, 2010
i have a .NET 3.5 solution with an asp.net(web site) project with fluentnhibernate and it's test project(class library project).i've referenced the asp.net project in the test project and with all fluentnhibernate/nhibenate dlls.
What i fail to comprehend is that, on a run of a webform (hit from browser) let's say Test.aspx, building of schema is successfull and i could see the tables in my database.
here is the method i call on Test.aspx.cs
[code]....
So from my comment the NullReferenceException happens when accessing the connectionstring. I don't have the explanation on why that happens.
View 2 Replies
Mar 16, 2011
My development environment: VS2010, win7. My regular solution setup for authoring a custom control is a Website project which I use for testing purposes and an ASP.NET server control project which is the actual control. Sometimes when I make changes to the custom control project and rebuild the solution the changes I made to the custom control are not shown/implemented when control is used in my testing project so I MUST close the solution and reopen it in order for my changes to appear.
View 1 Replies
Jul 17, 2010
I have downloaded a project from the internet called the SMS Source example. I wanted to open this project in VS2010, so a conversion wizard has popped up prompting for the conversion. But it has errors in converting.
Error msg:
Conversion Report - SMSSend.csproj:
Error converting project file. MSB0001: Internal MSBuild Error: Missing resource 'MissingAttribute'
View 3 Replies
Jan 8, 2010
On the Timelog page, I want to put 2 dropdown list: 1 Manufacturing Project, 1 Engineer Project. However, users can choose either Manufacturing project dropdown or Engineer project dropdown (not both).
View 4 Replies
Nov 4, 2010
We are upgrading .Net 2.0 Framework Web service project to .Net 3.5 Project. We are not changing any methods. Will there be any change in the proxy because of this Framework Upgrade.My requirement is to all the existing clients consuming this webservice should not have any impact due to this framework upgrade.
View 1 Replies
Oct 1, 2010
Approximate cost of the project Duration of the project ( There are 2 Developers ) Can I charge the client for software license ( like Visual Studio license since I have purchased it by paying a hefty amount)
My profile as a developer is as follows:
I am a C#, .net, ASP.net developer with 3 years experience in enterprise class web and desktop projects. I can work 20 hours a week
The brief requirements of the project are as follows::
I have to develop an Ecommerce website. The website is meant for buyers, sellers, advertisers and bidders ( I would say it is Business to Business and also Business to Customer site ) The HTML's will be given by the client. The website will have all the features of any Ecommerce site like buying products, selling them, searching products, sorting them,etc The website should conform to W3C standards
View 3 Replies
Aug 4, 2010
Let's say I have a Visual Studio solution with a Web project, a BLL project, and a DAL project. I'm trying to follow the repository pattern keeping my SQL code in the DAL with an interface that is referenced by the BLL.
I have a handful of common solutions for things such as error handling, usage logging, and other things that can be considered utility functions (i.e. not in the business spec). I'm keeping these in a Common project.
Here are a few ideas I've had with regards to structuring the Common project...
Bundle SQL with logic in a given class
Create a layered solution within the Common project
Discard the Common project and put utility functions in with BLL/DAL
Is one of these ideas better/worse than the other? Does anyone have a better solution?
It's worth noting that these utility functions will be reused in a variety of other applications.
View 1 Replies
