I have a site. Net published to a server, when I make changes to a single page, compile and publish an application, and copy only the page that change on the server a problem occurs on an assembly that is not, how do I make a partial publication? (Only the page where I made the changes)
View 2 RepliesGodaddy Publication Error - Resources cannot be found
View 2 Repliesi want to create automated web based book publication system.My company is publishing reports which is written in words. & there is lots of hassel on formatting word document.So we want to develop system where different users can loged into system then create different chapters & different parts within that chapters.Can anyone suggest any opensource project or any guidelines to achieve the things mentioned above
View 1 RepliesI've implemented a Wizard in which most steps are UserControls. One of these steps contains a DropDownList and a RadioButtonList. Depending on the item selected in the DropDownList, some items in the adioButtonList are disabled or enabled via a callback. This works fine.
Then I added a ToolkitScriptManager to the page (EnablePartialRendering="true") and wrapped the controls in this particular step in an UpdatePanel's ContentTemplate. Running inside of VS2008, the appropriate radio buttons are disabled or enabled as expected in response to changes in the DropDownList without a full page refresh. It feels much more response and looks slick.
Then I deploy to the test server and suddenly the partial-page refresh is gone, the whole page is redrawing as though the script manager and UpdatePanel hadn't been added.
I've tried several variations on this, always with the same result. For instance - I moved the DropDownList outside of the updatePanel and added an AsyncPostbackTrigger for the DropDown's SelectedIndexChange event. No change - works in VS2008 but not on the server. - I added ChildrenAsTriggers="false" UpdateMode="Conditional" to the UpdatePanel, both with the DropDown inside the UpdatePanel and outside the UpdatePanel. No change - works in VS2008 but not on the server.
I have an MVC view that contains a number of partial views. These partial views are populated using partial requests so the controller for the view itself doesn't pass any data to them. Is it possible to reload the data in one of those partial views if an action was triggered in another? For example, one partial view has a jqGrid and I want to refresh the data in another partial view when a user selects a new row in this grid. Is there a code example for this scenario (in C#) that I can look at to see what am I doing wrong? I am using ajax calls to trigger a new request but non of the partial views are refreshed so I am not sure if the issue is with the routing, the controller,
View 1 Repliesi want to implement partial views in asp.net
View 1 RepliesI am getting this error on a website. does that mean the server is not competible with asp.net 3.5
Configuration Error
Description:An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Unrecognized configuration section system.serviceModel.
Source Error: [Code]....
Line 236: </assemblyBinding>Line 237: </runtime>Line 238: <system.serviceModel>Line 239: <serviceHostingEnvironment aspNetCompatibilityEnabled="true" />Line 240: </system.serviceModel>
Source File: D:Inetpubvhostsmuratmalli.comhttpdocsweb.config Line:
238
I have done partial views in ASP.NET MVC but now I want to convert it to ASP.NET. I have used AJAX and JavaScript. How can I convert the following:
<a href="#" onclick="LoadPartialView('#MainContentDiv', '<%=Url.Action("AdminHome", "Admin")%>')">Home</a> ,
<input type="button" value="Submit" onclick="LoadPartialViewPost('#MainContentDiv', '<%=Url.Action("ViewPage", "Controller")%>', $('form').serialize())" />
to ASP.NET, or in other words, how can I load a partial view in ASP.NET?
I'm using Entity Framework to create my data objects. Here's what my designer.cs file looks like:
[code]....
But my validations aren't loaded. If I try to submit the form with no value for Name, I get an error message saying The value '' is invalid. instead of my error message.
I couldn't find something similar in SO.
In ASP.NET, is there any way that on cue I can cause a partial postback with Javascript in an UpdatePanel?
I tried __doPostBack() but it does a full postback. I can trick it with a dummy button and fire click() then handle the partial postback that way, but I want a more graceful way than trickery.
How do I detect whether a postback is a partial postback from any of my Update Panels?
View 1 RepliesI have a single model type to wrap up various models I want to use in my view:
View 5 RepliesIn a page contains two UpdatePanels, How can I know which UpdatePanel causes the partial PostBack ?
I mean in the Page_Load event handler.
This is my code:
[Code]....
i m working in asp.net and i want to implement partial views. i want to load .ascx page without refreshing the current page and not even url changed. can i implement it in asp.net.
View 1 RepliesIn one of my mvc application's view I have an AJAX form:
<% using (Ajax.BeginForm("HandleAddForm", "Home", new AjaxOptions { UpdateTargetId = "ContentDiv", InsertionMode = InsertionMode.Replace, OnBegin = "beginFormLoadEffect", OnSuccess = "successFormLoadEffect" }, new { id = "AddForm" }))
{ %>
...
<% } %>
When user lefts the computer after five minutes he is beign automatiacally logged out . And when I submit form by clicking submit button the ContentDiv is beign filled with full site with login panel. I.e. I want to show the full site with login panel NOT in the ContentDiv. Is there any way to avoid this behaviour?
I have following architecture. My Model:
[Code]....
The partial view "PersonsView" has the same model and looks like this:<%@ Control Language="C#"
Inherits="System.Web.Mvc.ViewUserControl<Web.Models.WebModel>" %><%Html.RenderPartial("Person", Model.Persons.First); %><%Html.RenderPartial("Person", Model.Persons.Second); %>
And the the partial view "Person" has an other model:[Code].... If I press the "Submit-Button" on the first view I get to the follwing controler: [Code]....
I have 2 partial views and models for them. I want to show both views on page and i assume i need one model to pass to the page. Do i have to create all the properties again for both partial views into one model?
view model 1
[Code]....
view model 2
[Code]....
Maybe this question is quite simple because I'm new to MVC2. I have a simple demo MVC project.
(1) A weak-typed view: Index.aspx
<% Html.RenderPartial("ArticalList", ViewData["AllArticals"] as List<Artical>); %>
(2) A strong-typed partial view: ArticalList.ascx
<%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<List<Artical>>" %>
<% foreach (Artical a in Model) { %>
<%= Html.ActionLink(a.Title, "About", new { id = a.ID })%><br />
<%} %>
(3) Here is the HomeController.cs
public ActionResult Index()
{
ViewData["AllArticals"] = Artical.GetArticals();
return View();
}
public ActionResult ArticalList()
{
return PartialView(Artical.GetArticals());
}
Sorry I'm using a Web-Form "angle", because if I'm using a Web-Form, when I visit Index.aspx, rendering ArticalList.ascx will call public ActionResult ArticalList(). But here I need to write Artical.GetArticals() twice in two actions. How can I put them in one?
1) I have a "user control" (partial view) called LogIn where my users log in. It has the usual textbox/password/validators/etc.
2) I have one view called Account/LogOn.aspx that has the following code:
<% Html.RenderPartial("LogIn"); %>
3) I have another view called Home/Index.aspx that also has the following code:
<% Html.RenderPartial("LogIn"); %>
This renders a partial view inside my main views. When a user logs on, he/she is redirected to Home/Index.aspx
The problem:
I can log on from Account/LogOn.aspx, but I can't log on from called Home/Index.aspx. Why?
Perhaps someone out there can help me understand what's going on. I'm using jQuery UI dialog() to display html partials in my project. When a user clicks Add New it displays the add client form. However, when the user clicks on the Add or Cancel buttons in the dialog I get an error, "$(this).dialog is not a function". If I remove the open event and display a static form in the dialog the buttons the work fine.
ClientsController
public ActionResult ajaxCreateClient()
{
Client c = new Client(); [code].....
In my view I have a call to Html.RenderPartial("Products", Model.Products)
But it does not like that. Products is a linq to sql relation on Category (I am using the northwind database).
Got the MSChart working fine in a standard view, but I'm trying to put them on partial views that I'm then loading using jQuery tabs.
Problem is if you try to put the Chart on a partial, it moans about System.Web.UI.DataVisualization, saying it can't find it, no problem on a standard view though.
I have created a control that I use often on my web sites. To this control I hava a ViewModel class that has a property witha required attribute. I my "master"page I show this partial view but i can not get the validation on the view right in my master page.
This is how I have done it in short.
I have a ascx page containing a textbox and a button. If the textbox i empty when I press the button i Would like to show the user a red box around the textbox and some validation test. The partial view is strongly type with an class that contains only a string property for the textbox and has attribute [Required(Errormessage="Please enter a valid registration number")] just above the property.
Om my page that contains the partial view i looks very nice but I can not se the validation message or the red bos around the textbox how do I get the ModelState.IsValid from the partial view or how do I solve it so I can use the nice feature in DataAnnotations. I ´have search over the net but can not find any example code how to solve it. Does it work without java script?
Can partial classes be used for web-services or there is some other way to implement it ?
View 2 RepliesI have a question about how ASP.NET AJAX partial rendering actually works. Does it:
1) Renders the whole page on the server, transmits the whole page to the client, the client then merges just the area contained in the update panel.
2) Renders the whole page on the server, transmits and merges just the area contained by the update panel.
3) Renders, transmits and merges just the area contained by the update panel.