Configuration :: Report Is Not Shown When The Application Is Being Run From IIS?
Mar 3, 2011
I am generating simple reports. I am using reportviewer to view the report,dataset file(name.xsd) to retrieve and store the data, and report file(name.rdlc) to design my report. I am getting the data from remote database. when i run my application,it is generating the report and everything is correct, but when i run my aplpication from IIS, the report viewer is not showing any data in the report. unable to figure out the problem.
I have a web site. if I have a syntax error (i.e. intx i = 1;) on a .cs file in the app code folder, I can see the compilation errror with a line number on the IE browser as usual. But if I have that syntax error on a aspx.cs file, I only see a blank screen.
Note: for other reasons, I could not use Visual Studio to do compliation.
I have got a desktop application which was build in vs2005, now i am doing conversion of it to web application (vs2008). i have got around 40 crystal reports in it (desktop application).
tell me can i use them (rpt files) directly in web application or i will have to create all new reports?
I keep getting the all-too-familiar Report Viewer Configuration error, even after double-checking changes in web.config.It worked fine yesterday morning. Then by late afternoon, after I uploaded some site changes, it reverted to throwing the error.Report Viewer Configuration Error The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0
We are going develop a web application using asp.net. This applicaton is going to server 50 users per day and 40 users concurrently. As the user count is less, we are planning to have two webservers clustered under a webfarm. We are planning to go for a Sticky Session. Netscaler is the load balancing and reverse proxy we are using at hardware level to route to the same webserver till the end of the client session.
1. Do I need to implement any handler at asp.net level to route the session or to provide browser cookie details of session to NetScaler? If so, what should be implemented in detail. Any sample code will also be helpful.
2. I need to maintain a big chunk of object information in session. Does a webserver can handle it?
3. At the hardware level how ReverseProxy works to navigate it to the same webserver? I want conceptual details of it from a web application end.
We develop an asp.net 2 application and I used crystal report for reports so there are all reports files on one folder, and in this folder exist web.config and everything is fine work.he problem began when I convert this application to asp.net 3.5 and program work fine but reports show me this error:Could not load file or assembly 'System.Web.Extensions, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference.
Apologies if this seems obvious, but after a week searching I can't find a clear answer to my problem.
I have developed an application in Visual Web Developer 2010 Express that uses the asp.net application services membership provider. It works well in development on my machine (data in the ASPNETDB.MDF database).
I packaged my application and deployed the relevant files with FTP to my shared hosting provider.
I took a copy of the ASPNETDB.MDF and restored it to the SQL Server 2008 on my shared hosting. I can connect to this through the Database Explorer in Visual Web Developer, but it doesn't contain any schema or data.
I know once I have the database in production I will have to make sure the connection string in web.config is poiting to it, but I don't know how to get the DB to production in the first place.
I have a website that is using the ASP.Net report viewer web control which links to our Reporting Server.
We've also built a new WebServer using Server 2008 64bit. I've had some trouble getting this to work in general, but have figured it all out except for this last problem.
When I publish this website to our old WebServer that uses Server 2003 32bit, I have zero problems, the reports pull up as expected. But when I publish to the new webserver, the site works perfectly up until I try to load the Report Viewer page. I don't get any runtime errors, the only thing I get is the picture below. When I open up the IE errors, it basically says that it can't find any of the pictures, and everything is set to a null instance of the object.
I've installed BIDS 2008, the report viewer control and sp1 for it, and have asp.net 3.5, and all of the asp.net development features enabled.
i have created RDLC Report and tested on my system its working well but its not working when i am uploading these files on server i-e on my domain. My Code:-
i have my own cloude server. with iis7(OS:window server 2008) . i want to deploy my webApplication on that can u tell me best configuration of iis7 and webconfig file for my application.
We have lot of application parameters for each module in a C# .NET 4 ASP website. parameter examples: timeouts, formulae constants, thread limits per module, $ charges per usage etc. What is best out of following approaches we know: Use DB config table Use an xml. load that xml into local cache on start (and on xml change) simple constants.cs file with public const int XYZ = 123; type of key-value pairs. web.config (though i think its mostly for deployment type of config)
I have a web.config file defined in my asp.net web application. I have many different settings configured there. I have another project, this time a console application. I'd like to read several configurations from my web.config file. How can this be done?
I have an application which has a website and a project. The project contains an executable file which I'm trying to run as a process from the website's Global.asax file's application_start(). When I run this application from localhost, everything runs smoothly but when I deploy the application on IIS, application_start's code is executed and I can see the process name in the taskmanager but I cannot see the window which the console application normally starts in (when i run the application on localhost) and neither is the code executed.
Here's what I'm doing:
-- copied website and project in wwwroot -- made a virtual directory of the website -- when i run the website, I see the process in taskmanager but the code is not executed.
I am new to deployment and IIS, and would really appreciate I someone could tell me what i'm missing
I have used crystal Report in my asp.net application .but when i installed this application in another machine then it will give,error like this :
The type 'CrystalDecisions.Web.CrystalReportViewer' exists in both 'c:WINDOWSassemblyGACCrystalDecisions.Web9.1.5000.0__692fbea5521e1304CrystalDecisions.Web.dll' and 'c:WINDOWSassemblyGAC_MSILCrystalDecisions.Web10.2.3600.0__692fbea5521e1304CrystalDecisions.We b.dll' [code].....
Can I use report viewer control with linq to entity frame work ?It is must to use dataset for Report datasource ??????how generate report for asp.net application.
I have an asp.net web app and I need to launch a pdf report that is developed in SSRS using SQL 2005. The SSRS report query has been created. How can I go about launching the report?
I started building reports using report builder with visual studio 2008; I am now building a web application and I initially started with a silverlight application but I am finding a hard time trying to get the report to be executed from within the web application. Do I need to start from the beginning and redesign the whole thing or can I bind the report to a datagrid or something? I did not realize how frustrating web design can be.
I'm trying to create a Crystal Report to use within a web application. I have the report created and have added a 'CrystalReportViewer' control to an aspx page. All the tutorials I've found indicate the next step is "Click on the [...] next to the "Data Binding" Property and bring up the data binding pop-up window". I'm not seeing a "Data Binding" propert for the 'CrystalReportViewer' control. The only property. I see even related to data binding is "AutoDataBind".
[[COMException (0x80000220): Error in File C:WindowsTEMPSmall {287137BF-8E50-469F-B436-A0A385C7912A}.rpt:
Access to report file denied. Another program may be using it.i am getting this error while accessing the report in windows 7 we need to give write permission in IIS but how do i assign the write permission and to which file or folder or user do i need to assign it
i face some problem. My Crystal Report cannot work after i deploy in IIS.
it return error message:
Logon failed.Details: ADO Error Code: 0xSource: Microsoft OLE DB Provider for SQL ServerDescription: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.SQL State: 08001Native Error: Error in File C:DOCUME~1PCHO02~1ASPNETLOCALS~1TempCRAgingAR {601E0E56-4DE4-4DC1-A358-896394B4181C}.rpt:Unable to connect: incorrect log on parameters.i think it because i don't know how to deploy .can some one share how to do it?
I have a VS2008 Web Application project that is being pre-compiled without being updatable. When I try to load a page that should display an RDLC report using the ReportViewer, it just displays an empty page. It works fine in a non-precompiled version. What could be the problem?
I am developing a web app. My users want to be able to design their own reports. Is there a way I can embed a simple Report Designer in my app? If so, which Report Designer app should I use? The Report Designer should be an existing app. I don't want to create a Report Designer from scratch. More details: My app is an ASP.NET MVC application. But I can use Java based solutions too, using IKVM.
I have a asp.net C# web application which is trying to connect to a report server. I cannot seem to view any reports. The URL for the report server is - [URL] using this URL I can access the report server directory. This directory contains a folder called MHS.Enforcement.Reports and that contains a report called DashboardReport. The URL which the application is trying to access is - [URL] The user is authenticated and the paramaters all exist, it falls over on the reportViewer.ServerReport.SetParameters(reportParameters);' line. The code calling the report looks like this -
[Code]....
Does anyone know what I am doing wrong here? I didnt build this and dont know much about report server, so I have pretty much hit a dead end.
