I installed VS 2010 on XP machine with IIS working good. after the installation the IIS stoped answering when yrying to get to web pages in my server from othere IP's in the network
localy it is working .
As per subject, the webpage's javascript that is running on IIS5.0, is not working. I've set a line of javascript in C# backend codes in a button click event. When the button is clicked, window.close() shld be activated and a confirmation box is to be shown. However, upon deploying the page to iis, it didnt work anymore.
View 2 Repliesi have a machine that i use as a server, the machine is running Windows 7 and IIS 7. I am using Windows Xp and my browswe is IE8.In my application i use Infragistics menu controls. The menu freezes, and they dont respond or calloapse. I have tried the Compatibility mode but it still does that.
View 2 RepliesI have an application written in VB.NET that sends XML to another server and it takes another XML. I am using HttpWebRequest in sending it but when I get the request stream I got this error. Please note that the application is working on my machine, but on the deployment on server I got this error.
View 4 Repliesi have windows 2008 server which has default 3.5 framework installed
i want to install framework 2.0 64 bit earlier i had windows XP with VS2005 which worked on 2.0
i ave my webapplication doen on 2.0 framework so i need to install framework 2.0 64 bit so that my existing application culd work on the new system
how do i go abt.i am not able to install the framework
What is the guideline on installing the application dlls in GAC? I have not never done that. Is installing shared dllas like mvc2 dlls in GAC is a good approach?
What will happen in this case where I have an old version of the same dll in GAC and a new version of the same dll installed in the bin folder? Will always the GAC dll being used by the application rather than the dll in its bin folder?
I currently have the .net framework version 3.5 installed on my computer. Are there any known drawbacks to instyalling version 4?
View 5 RepliesI was trying to install Umraco CMS on my website locally first.
Although, I decided to install it on a subdomain of website but I had a problem in creating one. So, I was trying to install the Umbraco CMS in the blog folder of my webiste. i chose the Web Platform installer option from here : [URL]
On step 2, I opted to use an existing SQL Server Database. It asks for the username and password to access my application database. Screenshot:
[URL]
Is there some default value for this authentication because I never set this username and password for my database :-/
I am Rupesh B S. I am going to upload my first asp.net project on internet server. I have a doubt on uploading area. In my computer I installed - Visual Studio 2010 SQL Server 2008 No IIS Installed by myself My first doubts is Because of not installing IIS in my computer while I was developing my project and I did not stored Project folder in "inetpubwwwroot" Folder, will it cause any problem on running my project on internet. In My computer, my project is working smoothly Now.
My Second Doubt: Under which folder in server I should upload my project folder. area showing in my hosting server control panel. My Third Doubt: Anything I have to configure such as database for to upload in server b4 uploading my project folder into the server? MY Fourth Doubt: Just upload my project folder as it is as it in my computer - Right?
Why does the Web Platform Installer force you to install SQL 2008 Express?
I have a production server which already has an installation of SQL 2000 but no web development tools are installed. I would prefer not to add SQL 2008 Express if it is not necessary. The server in addition to being the primary intranet webserver is also DC, APP SERVER, FILE SERVER and basically does not need to handle an extra instance of SQL.
The main purpose of this is just one of convenience to have the web development app on the RDP Desktop instead of attaching to the server in some manner (ftp/unc share).
I developed and deployed a web application using ASP.NET,C# successfully. The application was running perfectly until few days back. [NOTE: It still works fine on local machine (tested using both development server and IIS)] What happens now is: The website opens perfectly. After few operations which involves database interactions, in all the pages, the pages stop responding. I mean, after a few clicks, if I try another operation the page starts postback for unlimited time period and never gets rendered
and a following message is given: The connection was reset: Firefox 3.5... IE cannot display the web page: IE 7, 8 There is no database connectivity issues. I checked event logs on the web server and found few unhandlled exceptions, I corrected those. Now the event log doesn't show any error. But the problem is same.
I tried accessing the page from web server's browser, everything works fine. Even my boss can browse all pages with no problem (both have Win Server installed). Other machines (mostly XP) can't browse after sometime(as described above). I checked the memory usage, cpu time - NO ISSUES.
I need to make my IIS6 to handle sub domain request to the main website so that i can handle it by using HTTPHandler
But i don't know what modifications should be done on IIS to accept unlimited subdomain name requests
How Does IIS Handle a Large Volume of Requests
View 2 RepliesI just discovered that a (simple) website I'm working on will be deployed to a server running framework 2.0. My quandry is that I started it using VS2010 and framework 4.0.
Is the solution as simple as changing the compile to options? I'm assuming that I'll have to remove the Listview controls I am using as they didn't get introduced until 3.5 (i think).
Am I basically correct with this or am I missing something?
I have developed an online exam application in college where we fix the timing for an exam the students conduct there exams at that time. this application is stored in local iis server in the college. i am using inproc session. here there are 200 students writing exam at a time .the problem is the browser stuck after some time and not resopnce unless we restrart the iis on the server. i checked the windows even log .the warning details are listed below. my question is ,is the inproc session is ok for here or i need to use the sql server session or state server session ...
Log Name: ApplicationSource: ASP.NET 2.0.50727.0Date: 3/10/2013 12:36:52 PM
Event ID: 1309Task Category: Web EventLevel: WarningKeywords: ClassicUser: N/AComputer: ZCW-HV01.zahracol.edu.om
Description:Event code: 3005 Event message: An unhandled exception has occurred.
Event time: 3/10/2013 12:36:52 PM Event time (UTC): 3/10/2013 8:36:52 AM
[Code] ....
I'm new to ASP.NET. I have created a web application project using VS2010. I tried to deploy it to my web server (IIS7) based on article on the internet (eg. link) but I've got an error:
[Code]....
I'm used to use web deployment projects. Currently I am developing a new web application with VS2010 and want to try to get along with the new web.config principle and deployment issues.
How can I replace a simple setting like
<applicationSettings>
<NAMESPACE>
<setting name="Testenvironment" serializeAs="String">
[code]...
I want to have this setting to be set to True in Debug, and false in Release. How must the entries in the Web.Debug.config and Web.Release.Config look like?Is there some documentation about the new web.config issue? Can't seem to google for the correct keywords.
I have VS 2008 and VS2010 on the same machine (OS:WINDOWS 7). Eariler both were working fine for ASP.NEt Webconfiguration manager. Now i amtrying to open ASP.Net Configuration Manager in VS 2010 , it showing Error. I had used this feature in both before this. WHat is the root problem.I am running VS2010 as RUN AS ADMINISTRATOR.It showing Icon in tray, but unable to open in IE. http://localhost:2663/asp.netwebadminfiles/If i click on this link, it process for a while and then redirect to error page. http://localhost:2663/asp.netwebadminfiles/error.aspxand show this message: An error was encountered. Please return to the previous page and try again.
View 4 RepliesFrom last month i have started develop application in vs2010 ultimate edition.I have install crystal report beta 2 for vs2010 from sap website.It was working fine at development machine.But whe i deployed it on windows 2003 production server it was showing assebly reference errors.For this I install crystal report runtime beta 2 on production server but error remain same.
My Question to all of you is ,provide appropriate link for setups for vs2010 and runtime for production server which is latest and bug free so our applications can run properly.
iam trying to make a web program that consist on marking days for vacation. my problem is this: when put the login and password and press the login button everything work great on vs2010. when i copy the prrogram to the iis 7 i put the username and password and when i press the login button nothing append. is like the button as no action.
View 5 Repliesmy clients PC has framework 4.0 installed and my web app runs in IIS 7 configured to use framework 4.0.
but for some reason when i open the same app in VS2010 it says that the app is running in framework 2.0??
when i open the startup options and go to build, the dropdown for the framework does not have framework 4.0 as an option only goes up to 3.5?
what are the steps to create a setup in asp.net mvc2.0 and VS2010 application and deploy it on server.
View 10 RepliesWe have had a web application built in vs2008. We have recently set up vs2010, and when we build the solution we are getting this error.
The CodeDom provider type "Microsoft.VJSharp.VJSharpCodeProvider, VJSharpCodeProvider, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" could not be located.
We have tried placing the following in web.config
<compiler language="vj#;vjs;vjsharp" extension=".jsl;.java" type="Microsoft.VJSharp.VJSharpCodeProvider, VJSharpCodeProvider, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
<providerOption name="CompilerVersion" value="v3.5"/>
<providerOption name="WarnAsError" value="false"/>
</compiler>
I have tried to create an asp web site with VS 2010, using VB code behind the Default.aspx form. It works fine on my local development computer with Win 7, but it will not work when I try to access it on my web site after I post it there. If I create a similar asp file with VWD 2008, using the html style code (which I do not know how to use) and post it to the web site, it works fine.
View 1 RepliesI just upgraded from VS2008 to VS2010, and now my web deployment project keeps rebuilding constantly. Even if I have a WinForms application set as the startup project and hit Ctrl+F5 to run it, the web deployment project rebuilds every time I hit Ctrl+F5. It didn't do this in VS2008. Does anyone know what's causing this?
View 1 Replies