What is the guideline on installing the application dlls in GAC? I have not never done that. Is installing shared dllas like mvc2 dlls in GAC is a good approach?
What will happen in this case where I have an old version of the same dll in GAC and a new version of the same dll installed in the bin folder? Will always the GAC dll being used by the application rather than the dll in its bin folder?
The server is 64 bit, but the app pool is configured to run as 32 bit. Do i need to publish 64 bit dlls? The rapid fail recovery sometimes recycles the app pool and someone suggested that it may be because i am not using 64 bit dlls. Doesn't sound likely... but you never know.I switched the publish settings to release and any cpu. But it spits out in the bin folder /bin/x64 as well. Do i copy over everything in the bin folder or do i just copy over the x64 dlls?? kinda confused on that. And why are pdb files being spit out with the dlls as well? I thought this was a debug thing only.
View 2 RepliesI recently noticed that when a dll is replaced at my web site, the site will take a long time to come back, even though the dll is only used by limited pages. I generally have to reset IIS to make the web site come back faster. Is this the normal behavior? or some settings need to be ajusted to avoid this?
View 1 RepliesI have my web application in which I have paste some of WebPages which is referencing to some DLL which was earlier in Bin Folder but when I move to my solution I am getting error of
Error 1
The type or namespace name 'MyDummyBinDLL' could not be found (are you missing a using directive or an assembly reference?)
F:WebProjectsProbingTestProbingTestGlobalPlus.UI.ClientWebLinkMyWebLinkHomePage.aspx.cs
13 7
GlobalPlus.UI.Client
I have a website (not web application). I deleted all references in the code to some DLLs and deleted the dlls themselves, but
when I recompile they keep coming back. I tried with resharper and read 100 articles, but I can't get rid of those dlls! )-:
How can I get rid of the DLLs?
I have 3 dll's compiled and put inside the bin dir of a website. They were referenced some time ago on a different computer with their respective source code.
I don't have the original source code for this version (all 3 dlls are like one app. They use each other functions) but I do have a newer version.
What I wanted to do was to completely remove any reference for the old version and just add a reference to the new version dlls. I tried:
Rightclick on dll---> delete , tried: look inside project file,sln, anywhere - web.config etc. to find the reference ..... Nothing. The old dlls come back after I recompile.
One of the new dlls has a different name than the same one in the older version. When I replace the older versions with the new ones and add the third dll with the different name and delete the older one and recompile. The older one just comes back from nowhere, and I get an error that I have some functions running both on the older dll and the newer one and it won't compile.
How do I completly remove the older version so I can start over with the new one?
The type or namespace name 'DocumentFormat' could not be found (are you missing a using directive or an assembly reference?)' errors even though the dll is on both machines and references are in the two relevant projects. The errors are only coming up in one project in the (web) application and the app is building as expected on my machine.
View 7 Repliesi have windows 2008 server which has default 3.5 framework installed
i want to install framework 2.0 64 bit earlier i had windows XP with VS2005 which worked on 2.0
i ave my webapplication doen on 2.0 framework so i need to install framework 2.0 64 bit so that my existing application culd work on the new system
how do i go abt.i am not able to install the framework
I currently have the .net framework version 3.5 installed on my computer. Are there any known drawbacks to instyalling version 4?
View 5 RepliesI was trying to install Umraco CMS on my website locally first.
Although, I decided to install it on a subdomain of website but I had a problem in creating one. So, I was trying to install the Umbraco CMS in the blog folder of my webiste. i chose the Web Platform installer option from here : [URL]
On step 2, I opted to use an existing SQL Server Database. It asks for the username and password to access my application database. Screenshot:
[URL]
Is there some default value for this authentication because I never set this username and password for my database :-/
The HRIS app in my company is a asp.net web application which started showing bugs after IE 8.0 was rolled out on our company intranet. Few people open multiple instances of the app with different credentials, now since IE 8.0 has this session sharing feature on different browser windows, the sessions in both windows become the same but the data rendered on controls of the page is different and that results in incosistent data going into the database.The application is huge and has a userbase of more than 5000. Is there any way other than changing thesession to cookieless. One approach could be to restrict only one instance of the app on a mchine at a time. But I am not able to find a way to implement this. Looking for a solution which would have minimum impact.
View 1 RepliesI am Rupesh B S. I am going to upload my first asp.net project on internet server. I have a doubt on uploading area. In my computer I installed - Visual Studio 2010 SQL Server 2008 No IIS Installed by myself My first doubts is Because of not installing IIS in my computer while I was developing my project and I did not stored Project folder in "inetpubwwwroot" Folder, will it cause any problem on running my project on internet. In My computer, my project is working smoothly Now.
My Second Doubt: Under which folder in server I should upload my project folder. area showing in my hosting server control panel. My Third Doubt: Anything I have to configure such as database for to upload in server b4 uploading my project folder into the server? MY Fourth Doubt: Just upload my project folder as it is as it in my computer - Right?
i would like to install a license such that it should run for a week or so. What i am doing is i will make setup file of my application and give it to the user when the user install it on PC i would like to give a default license which can run up to a week. After that even if he changes the date i would like to show a message as License expired
I need to know how can i give the user a default license which can run up to a week.
I installed VS 2010 on XP machine with IIS working good. after the installation the IIS stoped answering when yrying to get to web pages in my server from othere IP's in the network
localy it is working .
I've been tasked to update and install a new version of an old ActiveX control in our Aspx web application .The actual updating is fairly straightforward, but the installing is giving me headaches. Here is what I tried:
In the VB6 editor, get the properties of the ActiveX project, and check off the "autoincrement" checkbox in the "Make" tab.Set the version to 1.0.12 Create a new CAB with the Package&Deployment wizard. Copy this CAB to my website.
Then in the Aspx itself, I update the version of the activeX as follows:
Me.Page.Header.Controls.Add(New LiteralControl(String.Format("<div style=DISPLAY:none'><object id='PrtLabel' codebase='{0}' classid='CLSID:AB61148E-D4B5-4D4B-8867-9E4CE8229B5E' viewastext></object></div>", "PrtLabel.CAB#version=1,0,0,12")))
After this, I delete the prtlabel.dll and prtlabel.inf files from the "c:windowsdownloaded program files" folder.
Problem is, when I then visit the web page and it asks me to install the activeX, it doesn't actually do it (no error message appears though). When I go back to the "c:windowsdownloaded program files" folder, ONLY the prtlabel.inf file has been copied there, NOT the prtlabel.dll file.
Is there a special procedure to put a new version of an ActiveX control in your website?
I have vs 2003 installed on my machine and recently I installed vs2008. I believe this two version can run simultaneously on one machine. but I'm having problem running application written in .net 1.1 after installing .net 3.5. this is the error msg i see when I open asp.net application written .net 1.1 "HTTP:/1.1 500 Internal Server Error" Is there a proper way of installing vs 2008 to eliminate this problem I'm experiencing right now?
View 2 RepliesWhy does the Web Platform Installer force you to install SQL 2008 Express?
I have a production server which already has an installation of SQL 2000 but no web development tools are installed. I would prefer not to add SQL 2008 Express if it is not necessary. The server in addition to being the primary intranet webserver is also DC, APP SERVER, FILE SERVER and basically does not need to handle an extra instance of SQL.
The main purpose of this is just one of convenience to have the web development app on the RDP Desktop instead of attaching to the server in some manner (ftp/unc share).
On Windows XP I installed the .Net Framework 2.0 and my test aspx page worked fine. I then installed the .Net framework Service Pack 2 and then it breaks .Net. I get a Server Unavailable message and when I run aspnet_regiis -i I get a C0000005 error with message 'The Application failed to initialize properly.'
FYI, I have Symantec Endpoint Protection installed on my PC.
I want to read write excel file in my application without installing the office on my server. Means my server don't have any excel (MS office) installation. Is it necessory to install the office on server to excute the program of read or write the excel file.
View 5 RepliesIn my asp.net website in VS-2005 with SQL-Server 2005 as db, I need to implement role-based Authentication/Authorization.
I am familiar to the practises used in role-based authentication..as I have previously worked on projects that used this method. However, my project lead used to design the database. Now I have an existing website where authentication has been set to anonymous by setting 'allow users="?"' in the authentication tags in web.config.
If I use the createUserWizard control and use the Membership.creatUser(.....) method in code behind will the asp.net security tables, like users, roles, userinrole etc get created on its own?
Is there any sample or guideline shows how to properly handle session timeout in MVC applications?
View 4 RepliesI have a ASP.NET application. From that, User register, User will get email after registration. My Req : When user click on link provided in email. Then it should go to my ASP.Net application page . That page should install a wincows application on Client system through web ( I was inspired by Microsoft Windows update from Microsoft site)
View 1 RepliesWe are going develop a web application using asp.net. This applicaton is going to server 50 users per day and 40 users concurrently. As the user count is less, we are planning to have two webservers clustered under a webfarm. We are planning to go for a Sticky Session. Netscaler is the load balancing and reverse proxy we are using at hardware level to route to the same webserver till the end of the client session.
1. Do I need to implement any handler at asp.net level to route the session or to provide browser cookie details of session to NetScaler? If so, what should be implemented in detail. Any sample code will also be helpful.
2. I need to maintain a big chunk of object information in session. Does a webserver can handle it?
3. At the hardware level how ReverseProxy works to navigate it to the same webserver? I want conceptual details of it from a web application end.
Apologies if this seems obvious, but after a week searching I can't find a clear answer to my problem.
I have developed an application in Visual Web Developer 2010 Express that uses the asp.net application services membership provider. It works well in development on my machine (data in the ASPNETDB.MDF database).
I packaged my application and deployed the relevant files with FTP to my shared hosting provider.
I took a copy of the ASPNETDB.MDF and restored it to the SQL Server 2008 on my shared hosting. I can connect to this through the Database Explorer in Visual Web Developer, but it doesn't contain any schema or data.
I know once I have the database in production I will have to make sure the connection string in web.config is poiting to it, but I don't know how to get the DB to production in the first place.
i have my own cloude server. with iis7(OS:window server 2008) . i want to deploy my webApplication on that can u tell me best configuration of iis7 and webconfig file for my application.
View 3 Replies