I faced the following problem. Once I have completed my whole application it genereate dll file for each aspx file in bin folder. Now in published state the application faced some run time error in specific page. now I want to only republished that page generating error. while Visual Studio don't let me compile the individual page. can some one guide me in this regards.
View 1 Replies
Best way to describe my issue with vs 2010.create a new website. create the App_Code folder. create a new class in the folder. put the line "x" in the class declaration. hit compile. And the website will compile with no errors. It's not "seeing" this new class as being part of the project best I can tell.
View 1 RepliesIs there a way to copmile a solution into a single dll?
Said solution may have several custom projects. I want all of them, and all the third party dll's they reference compiled into a single dll.
I read these words in a book:
Projectless development simplifies debugging: When creating a web project, you must recompile the entire application when you change a single page. With projectless development, each page is compiled separately, and the page is only compiled when you request it for the first time.
How does compiling happen only for the first time in projectless development?
Should it recompile every time I run the page to reflect the new code I wrote it?
I am trying to configure my web application to send emails to my email address in case of any error . Below is my coding in the web config file, I am following example from a book cuase I AMM A nOVICE TO VISUAL STUDIO AND .NET AND C#. THE NAME OF THE BOOK IS ASP.Net E-Commerce in C#. I am not sure what to put in for the MailForm value since the book did not say could someone tell me .
[Code]....
In my other configuration file under the App_Code folder I have this coding Below:
[Code]....
I just discovered that a (simple) website I'm working on will be deployed to a server running framework 2.0. My quandry is that I started it using VS2010 and framework 4.0.
Is the solution as simple as changing the compile to options? I'm assuming that I'll have to remove the Listview controls I am using as they didn't get introduced until 3.5 (i think).
Am I basically correct with this or am I missing something?
I get the dreaded "the compiler failed with error code 1" error message when application starts. Sometimes, it does not even start and in VS 2008 I get:"Could not load file or assembly 'file///C:WindowsMicrosoft.NetFrameworv2.0.50727Temporary ASP.NET FilesInternal2d7d8a83649918fApp_Web_timecard.aspx.3ecd542a.aa9wycbd.dll' or one of its dependencies. The system cnnot find teh file specified"I have searched for this error and tried everything suggested to no avail. I deleted the "Internal" folder in Temporary ASP.NET Files folder, changed something in one of teh file and also in web.config to force a recompile and restared IIS. Same thing happens. I checked all the files and do not a circular definition/referencing.
View 2 RepliesHow is this achieved so that my source code is protected as put on a server other people have access to?
View 6 RepliesI have a project ointo which I have copied a folder form another website - that folder consists of aspx and associated aspx.vb files and folders cotaining js, css and ashx stuff. The folder is in the same place relative to root in both the original and target projects/sites. I have added the copied items to the destination project using VS "show all files"|right click add_to_project_method.
Things seem to have worked - e.g intellisense seems to recognise the controls in an aspx file when working on the matching aspx.vb file. However, whne you build the project (even though inteliisense is recognising them) the comiler moans that all of teh controls on the copied pages are undefined.
So intellisense says they are there but the compiler says they are not....
I'm using .resx file in my project. when i build the application the satellite assemblies are created under bin directory. If i add this dll in other application then these satellite assemblies are added in other application bin directory. I want to add only the dll reference, not any other dlls so how to create a single dll for this scenario?
View 1 RepliesI am using Visual Studio 2008 and my project is a Web Application Project so that I can compile my all files in just one assembly.
It is working but web form code behind files are compileing into single assembly but aspx files are not compiling. In addtion, these aspx files are present in the directories and they can be viewed.
Is there any technique to compile my all files into single assembly?
We have had a web application built in vs2008. We have recently set up vs2010, and when we build the solution we are getting this error.
The CodeDom provider type "Microsoft.VJSharp.VJSharpCodeProvider, VJSharpCodeProvider, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" could not be located.
We have tried placing the following in web.config
<compiler language="vj#;vjs;vjsharp" extension=".jsl;.java" type="Microsoft.VJSharp.VJSharpCodeProvider, VJSharpCodeProvider, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
<providerOption name="CompilerVersion" value="v3.5"/>
<providerOption name="WarnAsError" value="false"/>
</compiler>
i am urging to share my progect until developement to my server if i upload by ftp aspx files and .vb files it runs fine the problem is then i try to upload app_code folder, it returns error
how can i do for upload my classes?
I have .dll file on Desktop, I imported it to References my ASP.NET application - but when I delete this file from desktop I have error in my ASP.NET application. What is the solution ?
View 4 RepliesHow can I put MembershipProvider, ProfileProvider and RoleProvider in one single external config file?
View 1 RepliesI am trying to deploy my C# based ASP.Net 3.5 webapp
The hosting service provider said "Access 2003 (.mdb) file has to be put in 'access_db' folder in root folder"
I am currently using
OleDbConnection myConn = new OleDbConnection("Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" + Server.MapPath("~/access_db/filename.mdb"));
The folder structure is like
ParentFolder/access_db/filename.mdb
ParentFolder/ProjectFolder/<Project files> (App_Data, bin, *.aspx, web.config)
1) I am using a GridView on another page that doesn't allow to connect to a database outside the project folder. What should I do?
2) How do I modify the programmatic connection string ( shown above) ?
How to create an exe file for my project which has csharp and asp.net code, i mean a webapplication?I tried doing it with prubich from build menu and selecting a folder to store the files but that folder has got many dll files I dont know which to choose to install.
View 11 Replieswhen I reference a assembly. It's reference gets added to the project file in my case ( ABC.csproj)
Also when I take a look at the web.config file there is a section called <assemblies>. And lot of assemblies are added there.
What is the difference between link to the assemblies in the Project file and the assemblies in the web.config file?
I have huge excel files that I have to open from web browser. It takes several minutes to load huge file. Is it possible to open a single worksheet (single tab) at a time from excel file that contains many worksheets? I have to do this using C# / asp.net MVC
View 5 RepliesI have created 2 projects in a solution. One project contains Asp.net classes with login page and different other pages.
Another project contains a web service.
When I launch the solution(click F6 in visual studio 2008) the login page can access to the method of the webservice. Both projects are launched.
However when i added this 2 projects into IIS and deploy them (with create command) the login page cannot contact the method of the web service. Even though the web service is running because i can acces it manually. But they cannot communicate each other.
I am making project on hospital management which will contain different databases for different hospitals. how can i manage this thing with single asp.net project?
View 4 RepliesMy website uses a single project solution. Each web page file consists of C# code along with the markup. I now have to separate the code from each page into code-behind files that must be combined with many different versions of the markup. I assume this means that I will need a solution with a common project of code-behind files that is merged with a project of each version of the markup files in order to create different websites. I need to know how to organize the solution for debugging and building each website and where to place each file.
View 1 RepliesI want to generate the two crystal reports one is employee and another is project. Now I want to display the two reports in a single crystal report viewer. I've tried using sub-reports but the page header is not available in a sub reports. So I want to display two separate crystalreports in a single viewer.
View 2 RepliesWe're migrating from the web site to the web application model. Is there a way to allow the designer to use ftp to upload a single aspx page (foo.aspx and foo.aspx.cs) without requiring the use of the VS2008 Publish feature? We're a small shop and haven't bothered using source control as it wasn't much of an issue with the web site model. If the designer uses the Publish feature my binaries will be overwritten. I know that static pages are compiled at run time so I thought this would be possible but my tests result in errors. I've clicked around for some guidance but come up empty handed.
View 2 Repliesi have the project files which consist of some folders and some aspx and aspx.vb files.
I do not have any solution file or .sproj file in it.
so I need open a single file at a time and I can not debug the whole project or any single file also.
Do I have to generate a project file or solution file,
I just wanted to open the whole project file by opening a single file in VS 2008.
so that all the folder structure and the files I can view in solution explorer.
