I get the dreaded "the compiler failed with error code 1" error message when application starts. Sometimes, it does not even start and in VS 2008 I get:"Could not load file or assembly 'file///C:WindowsMicrosoft.NetFrameworv2.0.50727Temporary ASP.NET FilesInternal2d7d8a83649918fApp_Web_timecard.aspx.3ecd542a.aa9wycbd.dll' or one of its dependencies. The system cnnot find teh file specified"I have searched for this error and tried everything suggested to no avail. I deleted the "Internal" folder in Temporary ASP.NET Files folder, changed something in one of teh file and also in web.config to force a recompile and restared IIS. Same thing happens. I checked all the files and do not a circular definition/referencing.
We have had a web application built in vs2008. We have recently set up vs2010, and when we build the solution we are getting this error.
The CodeDom provider type "Microsoft.VJSharp.VJSharpCodeProvider, VJSharpCodeProvider, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" could not be located.
I just discovered that a (simple) website I'm working on will be deployed to a server running framework 2.0. My quandry is that I started it using VS2010 and framework 4.0.
Is the solution as simple as changing the compile to options? I'm assuming that I'll have to remove the Listview controls I am using as they didn't get introduced until 3.5 (i think).
Am I basically correct with this or am I missing something?
I have a project ointo which I have copied a folder form another website - that folder consists of aspx and associated aspx.vb files and folders cotaining js, css and ashx stuff. The folder is in the same place relative to root in both the original and target projects/sites. I have added the copied items to the destination project using VS "show all files"|right click add_to_project_method.
Things seem to have worked - e.g intellisense seems to recognise the controls in an aspx file when working on the matching aspx.vb file. However, whne you build the project (even though inteliisense is recognising them) the comiler moans that all of teh controls on the copied pages are undefined.
So intellisense says they are there but the compiler says they are not....
I need to have a textbox on a ASP.NET page in which a user would paste code and select one of the preset languages (C#, VB.NET, Python, Ruby etc) and I need to verify if the code compiles successfully. If it doesn't, then I need to show the errors and warnings with line numbers.
I am using Visual Studio 2008 and my project is a Web Application Project so that I can compile my all files in just one assembly.
It is working but web form code behind files are compileing into single assembly but aspx files are not compiling. In addtion, these aspx files are present in the directories and they can be viewed.
Is there any technique to compile my all files into single assembly?
Together with Ben (@BuildStarted), we've been building the RazorEngine project, which is designed to allow you compile and parse arbitrary templates outside of ASP.NET MVC. The project has had a couple of releases for a while now, and the feedback has been greatBut, we have encountered an issue: Medium trust.
Because we are using the CSharpCodeProvider to compile the Razor-generated classes (to load into the current AppDomain for execution), we encounter a SecurityException when trying to invoke it, due to the LinkDemand enforced on it. When a normal ASP.NET page is compiled (regardless of trust level), it does so through a BuildProvider which is normally GAC'd, and thus is implicity granted the appropriate permissions to compile. Hence ASP.NET WebForms works as standard in Medium trust.
Our code does not, and we need to target scenarios where our built library won't be deployed to the GAC and is running in Medium trust. So we considered building a BuildProvider specifically for it and defer compilation to the ASP.NET build system, but this seems overly complex and disjointed, and the provider itself requires both a mapping through a file extension, and a virtual path (which may or may not resolve to a physical file - think VirtualPathProvider). It all seems overkill, just to get the project working in Medium trust; not just that, but purely for ASP.NET projects as our engine also works outside of ASP.NETSo my question is this, does anyone know of any techniques or technologies for compiling C# code in a Medium trust environment?
i am urging to share my progect until developement to my server if i upload by ftp aspx files and .vb files it runs fine the problem is then i try to upload app_code folder, it returns error
I faced the following problem. Once I have completed my whole application it genereate dll file for each aspx file in bin folder. Now in published state the application faced some run time error in specific page. now I want to only republished that page generating error. while Visual Studio don't let me compile the individual page. can some one guide me in this regards.
i do have an app_code folder, which contains a base.cs, which is intented to have its class page_load to override other .aspx-files (without masterpage.master) when the page_load-class of these files is loaded. i wrote the class in base.cs as "public override page_load", but this gives an error when compiling. what am i doing wrong?
I have developed my asp.net application along with crystal report .. It was working fine before ... When i removed the add reference from my project of crystal report .... It started to show me error while building my application
The type 'CrystalDecisions.Web.CrystalReportSource' exists in both 'c:WINDOWSassemblyGAC_MSILCrystalDecisions.Web10.2.3600.0__692fbea5521e1304CrystalDecisions.Web.dll' and c:WINDOWSassemblyGAC_MSILCrystalDecisions.Web10.5.3700.0__692fbea5521e1304CrystalDecisions.Web.dll'
I'm doing a code of sending email to a reciepnt, i did the behind cod and the SMTP configuraiton but it when adding the statement to the web.config page it gives me an Error. "Error 2 Only one <configSections> element allowed per config file and if present must be the first child of the root <configuration> element. C:Documents and SettingsUserMy DocumentsVisual Studio 2008WebSitesWebSite2web.config 21 "I'm adding the following code inside the <configuration block as mentoined in another topic in the forum>
We have created a new cname for our subdomain website. The new website is working properly with cname. We do have .net application inside the webiste which is not working with cname. For eg,1. http://servername/_folder1/app/mypage.aspx (Accessing .net application (App) website without cname)2. http://NewDomian.xxxx/app/mypage.aspx (Accessing .net application (App) website with cname)The first case is working perfectly, but when I access the second url, I got the following error.Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.Source Error:
I am getting this error on a website. does that mean the server is not competible with asp.net 3.5
Configuration Error Description:An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Error: Executed as user: MACSTEELUSA.COMsa. ...9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:00:17 PM Error: 2010-06-02 20:00:18.56 Code: 0xC0202009 Source: CRM_ORACLE_ARSUMMARY Connection manager "SourceConnectionOLEDB" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.". End Error Error: 2010-06-02 20:00:18.58 Code: 0xC020801C Source: Data Flow Task Source - Query [1] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireCon... The package execution fa... The step failed.
Tasks Taken:Went to this folder checked for tnsnames.ora file but it is in good shape.
Excuse me this common error. I´ve found a lot of info in Google but I´ve not found my error. I´m trying to read some data from a custom section in web.config and I don´t know which is my error?
I built my ASP.NET website using vs2008 professional.
Now I have purchased vs2010 professional edition.
I do format my computer and then installed vs2010.
Now I want to deploy my website in vs2010, but it is giving configuration error in <add assemblies...
Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'
I keep getting the all-too-familiar Report Viewer Configuration error, even after double-checking changes in web.config.It worked fine yesterday morning. Then by late afternoon, after I uploaded some site changes, it reverted to throwing the error.Report Viewer Configuration Error The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0
I need to get my C# Web Application in VS 2008 Professional to compile. I have 2 projects in one solution.The first project, PowerMeter has an App_Code folder with namespace Inov.PowerMeter and the associated .aspx.cs files in the app reference it by using Inov.PowerMeter;. This code compiles fine and builds the powermeter.dll correctly. I have a second project called QuickMeter. The app_code for this creates a namespace Inov.Quickmeter and the aspx.cs files reference it correctly. But this doesn't compile.
Sometimes my website falls and when I check the Event Viewer I see the next error: Event message: A configuration error has occurred. Exception type: ConfigurationErrorsException Exception message: An error occurred creating the configuration section handler for ClientConfig: Item has already been added. Key in dictionary: 'category' Key being added: 'category. But I'm sure it appears only once.
I need to compile a class library (DLL) from an ASP.NET source. Now when I try to build it says this:
The type 'System.ComponentModel.ISupportInitialize' is defined in an assembly that is not referenced. You must add a reference to assembly 'System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
Now I know that I have to put it in the web.config file. But there is no web.config file it's just the source of the dll that needs to be compiled.
i have a website, i want to place the compile code on the production server, now i took the code on the local machine and trying to compile source code on local machine, but whenever i compile the code, in one of my control(ascx.cs) file i am getting error that the control does not exists in current context, i checked everything, Inherits, CodeFile, even in the code behind(.cs) file, everything is perfect, even i get the control id in the intellisense, when i remove the control and again add the same using intellisense, the errors gets removed but after i publish site, the same error comes again
