Long ago, I created an ASPNET user for development use.However, every time I boot up my dev system, I'm presented with a user login for ASPNET, among others.I don't want to remove ASPNET; I need it for dev work.But how do I keep it from appearing among the list of User Logins available at boot-up?
for SEO purposes, instead of refreshing the page every click of a product, is it possible to click on the product and when the server comes back with the response, to change the URL of the page to reflect the new link to information currently on page?
point is to have ajax redraw the product details portion of the page but have SEO friendly url's displayed so if people want to bookmark the currently selected product, it will bookmark the right url instead of the generic one to access the products page..
For example... here's my entry point:
Products.aspx
product1product2product3 If I were to click product1, the request goes to the server with roducts.aspx?id=product1 but the url is still products.aspx on the response meaning that when people bookmark the product1 item, and they send the link to a friend, the friend always gets the generic product.aspx page.
I'm trying to get around this without refreshing the full page (postback).
I have a simple ViewModel with 3 properties...I have some javascript going on where if a link is clicked, JQuery sets the values for 2 textfields (1 hidden) and a submit button where i process the rest of the Model on [HttpPost] - but for some reason some fields (the ones NOT set by javascript/JQuery) are coming back null - while on the page there is clearly values in them
[Code]....
And my Controller has the HttpGet and HttpPost, and a method that creates the nodes for the JQuery tree.
When you click on a node, this is when some values are set via javascript
Let's say I have two pages on the same ASP.NET C# WebSite:
Page1.aspx does things in the Page_Load event I navigate to Page2.aspx using the menu Page2.aspx does some things then Response.Redirect back to Page1.aspx Page1.aspx cannot do things in Page_Load event this time because it never fires.
I tried to turn off cache declaratively, tried using true for endResponse in my redirect... nothing seems to make a difference.
My web site is integrated into a client web site. Client web site reaches out to my site through an Xml request and I return Html embedded in an Xml response. Client site then displays the Html in an area on a page on their site. All is well so far...
Now, there is a link on the Html that does an HttpPost back to my site which causes a re-direct to another page on my site. i.e. [URL] -> HttpPost -> [URL]-> Response.Redirect("CookieTest.aspx"). Still, all is well. [URL]
All of the above can occur without authentication to mysite. Where I start running into problems is when CookieTest wants to do a FormsAuthentication.SetAuthCookie(). If I put a button on CookieTest that does FormsAuthentication.SetAuthCookie() and then Response.Redirect("SecurePage.aspx"), still under [URL], the SecurePage does not recognize the authentication because the auth cookie is not present.
1. Navigate straight to CookieTest.aspx
So I simplfied the problem into basic cookie set/read excercise and used the code below to test out cookie writing/reading ability. When I call the page directly from the browser I see that on initial load the response cookies are empty. Then on button click I see that the cookie is properly set in the response. Then on subsequent page refresh I see that the page load shows the request cookie.
2. Navigate to CookieTest.aspx in an HttpPost from [URL], as mentioned above.
Now on button click I see the cookie in the Response but do not see it come back in the Request of subsequent page refreshes, as if the client browser is rejecting cookies set by my server.
3. Navigate straight to CookieTest.aspx, then do the HttpPost from [URL]
In this case, since the cookie was set during a straight navigation to CookieTest.aspx, the cookie is present in the subsequent HttpPost/Redirect from [URL]. CookieTest.aspx has full access to the cookie and can even delete it.
4. Have CookieTest.aspx pop a new browser window simply sets the cookie and closes itself down.
Similar to #3, if the cookie is set through a popup window and then CookieTest is refreshed the cookie is present in the Request.
Notes:
The code does prove that the client browser accepts cookies.
When my page (CookieTest.aspx) is shown within the frame on the [URl] page, during any link back to my server, the Request.Url.Host shows my domain.
The server is 64 bit, but the app pool is configured to run as 32 bit. Do i need to publish 64 bit dlls? The rapid fail recovery sometimes recycles the app pool and someone suggested that it may be because i am not using 64 bit dlls. Doesn't sound likely... but you never know.I switched the publish settings to release and any cpu. But it spits out in the bin folder /bin/x64 as well. Do i copy over everything in the bin folder or do i just copy over the x64 dlls?? kinda confused on that. And why are pdb files being spit out with the dlls as well? I thought this was a debug thing only.
I had a .net 4.0 vb.net page that was setting session variable and setting a hidden form value to the same value. It was a paypal buy now button. When the user selects it, they are sent to paypal for payment. If the transaction is good, they are redirected back to another page on my site and a hidden value is sent back with the invoice I originally sent them. They are sending the form value, but my session variable does not available.
From the user point of view it's all seamless.. Is it the same session? And should my session variable be available?
I recently noticed that when a dll is replaced at my web site, the site will take a long time to come back, even though the dll is only used by limited pages. I generally have to reset IIS to make the web site come back faster. Is this the normal behavior? or some settings need to be ajusted to avoid this?
I have my web application in which I have paste some of WebPages which is referencing to some DLL which was earlier in Bin Folder but when I move to my solution I am getting error of
Error 1 The type or namespace name 'MyDummyBinDLL' could not be found (are you missing a using directive or an assembly reference?) F:WebProjectsProbingTestProbingTestGlobalPlus.UI.ClientWebLinkMyWebLinkHomePage.aspx.cs 13 7 GlobalPlus.UI.Client
What is the guideline on installing the application dlls in GAC? I have not never done that. Is installing shared dllas like mvc2 dlls in GAC is a good approach?
What will happen in this case where I have an old version of the same dll in GAC and a new version of the same dll installed in the bin folder? Will always the GAC dll being used by the application rather than the dll in its bin folder?
I have 3 dll's compiled and put inside the bin dir of a website. They were referenced some time ago on a different computer with their respective source code.
I don't have the original source code for this version (all 3 dlls are like one app. They use each other functions) but I do have a newer version.
What I wanted to do was to completely remove any reference for the old version and just add a reference to the new version dlls. I tried:
Rightclick on dll---> delete , tried: look inside project file,sln, anywhere - web.config etc. to find the reference ..... Nothing. The old dlls come back after I recompile.
One of the new dlls has a different name than the same one in the older version. When I replace the older versions with the new ones and add the third dll with the different name and delete the older one and recompile. The older one just comes back from nowhere, and I get an error that I have some functions running both on the older dll and the newer one and it won't compile.
How do I completly remove the older version so I can start over with the new one?
The type or namespace name 'DocumentFormat' could not be found (are you missing a using directive or an assembly reference?)' errors even though the dll is on both machines and references are in the two relevant projects. The errors are only coming up in one project in the (web) application and the app is building as expected on my machine.
i used differnet different culture global resource files in my project. in the local host myapplication run perfectly but if in the live(web) it raises below error.i dont why this error is comingServer Error in '/' Application.
Now I want to know: Is there any difference between coming to this page using a proper link or coming back using browser back button, or is there any way to detect this?
My boss gave me VS 2010 to work on my .NET 3.5 pages. I converted it, tried uploading the pages and realized that the hosting plan the company has doesn't have .NET 4.0.
I think I am finally ready to publish my website but I have a issue that is causing me some confusion.The website has been built on my desktop so it's location is something likeC:Documents and SettingsMeDesktopIn the project, under a folder called "App Data" i have my database and all the connection strings in my website point to this folder.However when I use VS to publish the website if for example I were to publish it tooC:CopySiteobviously even though there is a copy of the database in the "App Data" folder in this location all the connection strings point to the Database location on my desktop. How can I get it so the CopySite "App Data" folder is the one used to store all my data?
I have a project that was originally created in VS2005 using .net 2.0. I currently have win 7 machine and vs2008. When I try to compile the application it comes back saying that I am missing an assembly Web.Services2 Besides upgrading to 3.5 and having to rebuild most of the web services.
I'm having hard time to figure out whats going on with my IIS.My application was running in IIS very well untill I used Visual studio Copy website to update the files in the wwwroot.All of a sudden I got this error.My application works fine from the file system.I tried deleting my application from IIS and uninstalled from control panel and ran the newly built msi/exe but I never got my application back what so ever.This is web.config for reference.I've also tried <trust level="Full"> element but this didn't help.I remember the whole problem started when I was trying to debug the functionality to upload and download files in ASP.Net.
I have an ASP.NET project under source control (Subversion). For various reasons, I don't want to add the Bin directory or its contents to source control, so I have it svn:ignored. DLLs are loaded into here during a Visual Studio build, and I can start with a clean directory and/or delete all the contents of this directory and still have a successful build.
I have two 3rd party unmanaged c++ dll and one C++ project which uses these dlls. In my asp.net project i added c++ project as reference but in runtime it fails with that error:
Exception from HRESULT: 0x8007007E
Visual studio puts c++ project's dll into /bin folder auto. Even if i put other dlls into bin folder, it fails.