when i was creatin the website visual studio created the aspnet.mdf automaticly and it was working fine . i could create a new user and login with no problems but after uploading the site content it wont work any more . so my question is how do i susscefly publish the aspnet.mdf file to the server so it would work
View 2 RepliesI am learning web services . I had one sample project.in that installer class which is available in visual studio installed templates . When I started debugging services gets started working.in searching I didn't get any information about installer . How to deploy wcf services library ....
View 1 RepliesI've created a website and now I'm trying to publish it on web server but I'm getting a lot of errors related to 'web.config' that website working fine in my VS2010 but I don't know what's the problem on the server I'm getting following error:-
[Code]....
If I remove whole line 6 then it show error in line 7and so on, I've use radcontrol tool in my web application but whatever I've used they are working fine on my system.
my web.config file is here [URL]
I have created a web applcation and i need to publish that in a sharepoint server with single sign one.
View 1 RepliesI can not publish my MVC2 project on my server.
My configuration is: VS 2010, MVC2, IIS 7.0
I have 6 different service clients in one project and as we all know when I debug the WCF client hosts them and all is working great.
If i publish up to my server the site will run but i keep getting this error after login.
There was no endpoint listening at http://localhost:8731/Design_Time_Addresses/CISS.Services/SecurityService/ that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.
This is suppose to be easy to publish your site correct? what settings do I need in VS 2010 and what is required on IIS 7.0 to get it to work?
I am trying to publish my web site on another server. I went to build menu and then selected publish. I did [URL] of the web site When I hit the publish button, I got the error publish failed. How can I see what is the reason for publish being failed. Also, Is their any other way, i can publish the web site. the server that I am publishing my web site is windows 2003 server. I am using visual studio 2008. The IIs version is 5.2 R2
View 2 RepliesI am trying to publish the website in windows 2003 server in my office. it is getting published in windows xp iis. not getting up in windows 2003.
View 5 RepliesWe have a virtual server hosted to the third party which we access through remote desktop. We have Sql server 2008 on Windows 2008. I created a website on my local hard drive and now we are ready to deploy. My question is what are the recommendations for publishing websites? What steps I need to take care of? Is it possible not to deploy the "code-behind" files. Incase of hacking of windows server, I do not want somebody to see my .vb files or Is it possbile that I can convert the whole thing except aspx files in to a strong dll?
View 3 RepliesI'm relatively new to actually publishing sites on my own..Anyway, right now I am using VS2008 to build / compile my web application and then publish it to the server. Simple enough, until I want to change several of the code behinds, and don't want to spend 30 minutes re-publishing several thousand documents.
I have been reading that publishing via VS is not the best approach, so I guess I have two questions:
1. Using VS2008, is there a way to build the project and publish only certain parts of the project such as the pre-compiled code or better yet have VS only update the code that has been changed on the server? I suppose I could simply publish it to my local drive and pick apart the files from there / is there a better way?
2. In your opinion what is the best deployment strategy?
give me an example of the proper connection string for getting VS 2010 to use the aspnet database on my SQL 2008 server? The db is there, I just can't seem to get connected. Server name GUNSITESQL, mixed security. I want to logon with a SQL user logon id, the db name is the default aspnet.
Currently, the web.config file is the default.
I am installing MS Visual Studio 2010 on my PC and will develop website on it. I have developed my old asp.net websites on MS Visual Studio2005.Our webserver where we publish our websites on Windows Server 2003.I want to know that whether we can publish websites develop in MS Visual Studio 2010 on Windows Server 2003?
View 4 RepliesHow can I sync up the aspnet membership tables among 2 different databases?
View 1 Repliesthe account we use to copy/publish websites to our web server is not allowing us access to push websites. I've added this account to the permissions in the links listed in the below link, but i don't have success when trying to push remotely. When the account is in the local admins account, everything works flawlessly, but we are not allowed to have it in there. http://social.msdn.microsoft.com/Forums/en-US/vssetup/thread/31be047e-4716-4974-b8a1-be0111b50199 I've googled and searched a lot for this particular error, but am not finding an answer that helps. We get this error, 'Unable to create the Web 'http://edea01/test/planning'. You are not authorized to perform the current operation', and the above link is the scenario that matches mine the most. I don't do develompment work, but am asked to figure out this connection problem.
View 3 RepliesI think the question speaks for itself, but I'm sick of scrolling through my procedure list filled with 50 aspnet procedures.
Is there a way to hide the dbo schema, or these procedures from the list?
Is there a different/equivalent tool that would let me do this?
With TOAD, I could open each schema independently - that'd be wonderful!
My only other option is to connect our membership provider to a different database instead of the same as everything else. All in all this isn't a huge deal, but I figured I'd ask instead of being silently frustrated any longer.
The server is 64 bit, but the app pool is configured to run as 32 bit. Do i need to publish 64 bit dlls? The rapid fail recovery sometimes recycles the app pool and someone suggested that it may be because i am not using 64 bit dlls. Doesn't sound likely... but you never know.I switched the publish settings to release and any cpu. But it spits out in the bin folder /bin/x64 as well. Do i copy over everything in the bin folder or do i just copy over the x64 dlls?? kinda confused on that. And why are pdb files being spit out with the dlls as well? I thought this was a debug thing only.
View 2 Replieshow can I publish a web application to the internet
View 2 RepliesI had first build an database and populated it with various information, set some properties related to FTS and other things.
Now, in the asp.net MVC application, I am able to add the database ServerExplorer->Connect To Database-> Data Source= MS SQL SERVER->Server name->OpAmp-pc. Now, I was unable to add the database by copying the file in app data folder.
My doubt it how can I share the website+ database with my fellow batchmate or put the whole website online.
Build->Publish Sirte, didn't solved the pupose.
i have dsigned a website in my desktop in my company. i have installed sql server 2005 and visual studio 2008.everything is working fine if i host my website from my workstation.but my desktop is not accessible to all the departments in my company so i have to host my website on one of the company's sql servers.let us assume that "isaserver" is my company's sql server where i want to host my website.now, what i did that i created a virtual directory in isaserver's wwwroot folder and pasted my c:/inetpub/wwwroot contents into that.but when i tried to access the website, its not working.
View 4 Repliesim Using asp.net 3.5
and i want to publish it and i want to test My WebSite from Remote computer ,
but i want to test it on (localhost) not on Server !! how?
Developing a website in ASP.net. On the development site all is working fine.We decide to publish the site using visual studio 2008's publish mechanism.The publish goes flawless.When we go to the live site, it hangs anywhere from 2 minutes to 30 minutes before it starts serving pages.All other sites on the same server seem to work fine.If we reboot the server it starts serving pages right away.It is not a programming issue, as once the site kicks in all seems to work fine.VS 2008, .NET 3.5, On both IIS 6.0 and 7.5
View 3 RepliesI love the idea of precompiling my web site. In fact, 've never understood why MS didn't consider this important all along. So I tried the new Publish Web Site command in VS2010 and it seems to work well. That is, until I need to make a change to my site!In order to implement the tiniest of changes to my site, it looks like I must run the Publish Web Site command again, which takes forever because it overwrites and copies absolutely everything on my site, including the upload directory where users' images get stored, which is a problem!If I attempt to instead use Copy Web Site, then I get error about how I can't have an App_Code folder, or something along those lines, in a precompiled app.So what am I supposed to do? Is the only way I can have a precompiled site by requiring a complete reset of all content if I need to implement the tiniest of changes?
View 13 RepliesI am currently having problems with publishing my website to my server. I have ensure that the permissions/username/password is correct. I tried creating a new website and I have no problems at all. However, I have this project in localhost which I want to publish and it just gives a message "Failed to Publish". Also I am trying to configure my webconfig to access my sql server 2005 database not by windows authentication but by sql server authentication, which I am unsure of how to do it.
View 3 Repliesi have a web project which runs perfectly. but when i publish and run from localhost i get the following error:
Server Error in '/manpowermarketing' Application. Failed to access IIS metabase. Description:
[Code]....
I want to publish my project, and upload it to my host but I don't know how to to do that to convert my codes to .dll to protect it ? to take a copy of my database and upload it to the host and bind it all steps needed to complete that successfully
View 2 RepliesI have set up a development server (Win Server 2003) with IIS 6.0. I have the .NET Framework 2.0 and 4.0 installed. My web host (where my app will run) has .NET 3.5. Will it work for me to set up my development server with 4.0 in IIS, and then create a new website in Visual Studio (2010) that targets the .NET 3.5 framework (aimed at my development server)? want to be able to publish the site to my web host (with .NET 3.5).
View 2 Replies