i am using microsoft visual studio 2008 sp1 for developing my web sitei have done url rewrite with this way and it does work on host perfectly
[Code]....
but it does not working on remote hostmy remote host is windows server 2008 sp1 and iss7do i need to make any setting on remote host to make it work ?
We have a virtual server hosted to the third party which we access through remote desktop. We have Sql server 2008 on Windows 2008. I created a website on my local hard drive and now we are ready to deploy. My question is what are the recommendations for publishing websites? What steps I need to take care of? Is it possible not to deploy the "code-behind" files. Incase of hacking of windows server, I do not want somebody to see my .vb files or Is it possbile that I can convert the whole thing except aspx files in to a strong dll?
View 3 RepliesI have a web site running on IIS7 on a remote server. I would like to do the following: Create a new subfolder under the root virtual directory. Create a new app pool. Add this new app pool to the new subfolder Normally, I would do this manually in IIS by first creating the app pool, and then right-clicking the sub folder an choose "add application", but I need to do this programmatically in C#. I've managed to make the above points 1 and 2 work, but I can't find the way to adding the application to the sub folder. This is the code I have used so far for 1 and 2:
[Code]....
So, I need to add "MyAppPool" to the "NytSite" folder. Is this even the correct way to do this?
I have the following setting in my web.config to redirect to a default page:
<defaultDocument>
<files>
<clear/>
<add value="default.aspx"/>
</files>
</defaultDocument>
For example when a user enters www.homeforhire.com they should be redirected to default.aspx (for operational reasons the user is then redirected to
www.homeforhire.com/home.aspx).
Instead an error is caught in the Rewrite module (which should not be activated). I am using an http module to perform URL rewriting.
It appears as if the default document setup is not working correctly, and the requested page ~/ is being sent to the Rewrite module, causing an error (which is then caught by my error handler and the user is redirected to the home page).
Entering www.homeforhire.com/default.aspx works correctly.
Can anyone tell me why the default document settings in the web.config do not appear to be working?
I have created an application which is relying on routing extensively. it works fine in my development machine, and when deployed in the local IIS server. but when i publish it to remote server routing does not work? any idea why it happens. i also have the following in my web.config
[Code]....
I heve been sent some code as an example (BELOW in C#) with a login password, to request data from a remote site.
For example: A customer is givn a code from a remote site that contains his data. the customer then arrives at my site enterst the code on my sites form the script access the data from the remote site.
e.g. A customer enter my site > enters code> collects data from remote server> displays on my site> proceeds to checkout on my site.
I have no idea how to do this from the code example.
Code:using System;
using System.Collections.Generic;
using System.Text;
using System.Xml;
[Code]....
i have a website that accepts files from users.
the site currently save all files to a local directory (~/Data/<Date>), which can be accessed via [URL](Public server)
however to increase performance i need to save the file to a remote http host. ex [URL] (different public server)
i have ftp access to all my public server.
i'm just confused as to which is the most secure way to upload the files from codebehind.
FTP or HTTP Post.
the <date> section of the URL is dynamicall generate using Directory.CreateDirectory(Server.MapPath("<year><month><day>");
I am about to give up debugging SMTP servers to send email... My code is the following
SmtpClient mailClient = new SmtpClient("plus.smtp.mail.yahoo.com", 465);
mailClient.EnableSsl = true;
MailMessage message = new MailMessage();
message.To.Add("aditya15417@hotmail.com");
message.Subject = "permias-tucson-contact-us";
mailClient.Credentials = new NetworkCredential("myemail@yahoo.com", "mypassword");
MailAddress fromAddress = new MailAddress(Email.Text, Name.Text);
message.From = fromAddress;
mailClient.Send(message);
I'm getting an error in Parallels Plesk for SQL Server database on restore the cause of which is a mystery to me. Here is the support ticket I sent my hosting company:
I'm in the process of restoring my databases and the first one restored just fine. The second one called ***** for *****.com failed with the following error:
Error: dbbackup failed: Unable to restore database 'alienreports' Not valid backup The media family on device C:WINDOWSTEMPlocalhostalienreports*******.bak' is incorrectly formed. SQL Server cannot process this media family. VERIFY DATABASE is terminating abnormally.
This happened both when using the .bak file from my old host and after restoring that file on my local machine using SQL Server Management Studio 2008 just fine before backing it up and getting the same error when trying to upload and restore.
I have a website that was originally written in webforms to which I have added MVC functionality. When debugging locally it works fine, however, once published and uploaded to my host the routes do not work and return a 404. I am pretty sure that I have uploaded all the correct files. Would just appear that routing is not working.
(the site will still serve normal aspx pages fine)
I think the problem may be related to http://stackoverflow.com/questions/1772975/mixing-asp-net-mvc-into-asp-net-webforms
But I cant see from that thread what the solution was. It looks like it might be something to do with the app_pool mode - but I am running in integrated mode, which is right AFAIK
UPDATE 2
So I think I have routing working. I basically created a new MVC app and went through theweb config file line by line and made sure I have everything I needed. Funnily, none of the tutorials online mention the correct additions you need to make. I have have another issue mind you... When i load my mvc page I am greeted with the message: The SessionStateTempDataProvider requires SessionState to be enabled.
I've added a line to web.config to enable sessions (wasn't aware they were off) and it still doesnt work.
UPDATE I created a new asp.net MVC project and ended up going through web.config line by line and ensuring that everything that related to MVC was included in my hybrid app. Suffice to say that none of the guides mention all the settings that are required (i was using the book professional asp.net mvc 1.0). I then included the global.asax file which is not published and set up a route so that a request for / was not being caught by MVC. I also had to enable sessions in web.config.
I'm getting a lot of these error messages in my logs on one of my servers and intermittently on two others.Googling didn't reveal very much information, mostly related to file uploads or downloads being interrupted. My pages are basically just text files with "ok" in them that only have .aspx extension for future plans, there's no actual code powering the pages. Servers are all Windows Server 2008 RC2 x64 running IIS7 / ASP.NET 4.Statistically it's happening well under 1% of the time but because of the volume of traffic that still clutters my event log with 2 or 3 of these messages per minute.Edit:tracked down the problem, setting buffering to true stopped it occurring.
View 2 RepliesI have a SQL server in my office. I can connect from my home development workstation website to the remote SQL server with no problems but when I upload the site to the web host and try and use the same SQL server it fails with 'A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible'
View 4 Replies{"Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host."}
I get the above error when sending email...
I am trying to rewrite url in IIS server.What would be the simplest steps for getting this functionalities in my website.
View 1 RepliesI have a application which uses intelligencia urlrewriter to rewrite urls into seo friendly urls. Blog engine is integrated in this application under subfolder but shares webconfig with my application. Application runs perfectly on development server, but when i publish it to 2008/IIS7 server urls links don't work. Links similar to following work
<rewrite url="^/Abc" to="~/abc.aspx" processing="stop"/>
<rewrite url="^/Abc_123" to="~/abc-123.aspx" processing="stop"/>
But links like following fail to redirect and i get 404 errors
<rewrite url="^/Abc/(.*/)" to="~/abc.aspx?id=$1" processing="stop"/>
<rewrite url="^/XYZ" to="~/xyz.aspx?cat=school" processing="stop"/>
Anything which has query parameters in aspx url fails. I'm not sure what is causing this error on 2008/IIS 7 server and not on my VS 2008 development server.
Rewrite has been working like a charm when testing and using it locally. However when I uploaded my application, then it gave me some problems.Problem Overview
My site - http://www.site.com/
Site is stored in a subdirectory on my root hosting in a folder call "sub".
So when I go to the URL http://www.site.com/part1/file.aspx then in my Rewrite Rule the {URL} is given as "/sub/part1/file.aspx" instead of "/part1/file.aspx"
Problem/Question,Is there a way I can handle all the {URL} in my Rewrite Rules without including the "sub" in the {URL} and without having to change every single ones Pattern?
if i write only one rule then work fine .. but if i use anothe rule with same pattern then throw error.
<rewrite>
<rules><rule name="rule1" stopProcessing="true"> <match url="([a-zA-Z0-9()-_]+)-([0-9]+)" /> <action type="Rewrite" url="test.aspx?inst_id={R:2}" /> </rule> <rule name="rule2" stopProcessing="true"> <match url="([a-zA-Z0-9()-_]+)-([0-9]+)" />
<action type="Rewrite" url="courses/crse_info.aspx?crse_id={R:2}"/> </rule> </rules> </rewrite>
I can't for the life in me work out how to get the outbound rules to work. All my inbound are spot on (not included). I have dynamic and statis compression disabled, I moved the module up in the modules list just incase.The server is Windows 2008 R2 x64 if that makes a difference. Also not that the 'Content' pages get rewritten perfectly. I don't get it.
You can view the live site here: http://www.ink4u.co.uk
[Code]....
I am trying to make a rewrite rule to check whether the URLends with '.htm' or '.html', but does not contain 'Archive.aspx'. How can I do this with regular expression?
The url starts out like this: [URL]/test.htm(or .html), and ends up like this:[URL]
Hello, I'm trying to implement URL rewriting for the first time. I must use URL Rewrite Module IIS7 per my hosting company. All of the examples I have found so far will rewrite a url such as:
www.domain.com/ShowProduct.aspx?ID=233&Title=Product-Title,
to: www.domain.com/ShowProduct/ProductTitle/233. The common scenario between these examples is that the rewrite chops off the .aspx & special characters and shuffles the query string parameters around. I get how that all works. However, I had something a little different in mind and I'm not sure if it can be accomplished.
My urls currently look like this: www.domain.com/ShowProduct?ID=233, and I would like them to look like this: www.domain.com/ShowProduct/Product-Title. The way I would imagine this working is, during the rewrite, pass the ID to the db and return the Title for the new url. You see, I currently don't need to pass the Title as a query string parameter and I'd prefer to not show the ID at all. This would be ideal. Can this be accomplished? Or
will I have to add the Title as a query string param and show the ID in rewritten url?
I am using a project that rewrites URL. I am not familiar with this code, but it works fine on IIS 6 and with VS2010. Problem begins when I need to deploy into IIS7.5 server. Seems like the rewrite doesn't work and the page doesn't fount after rewriting page.
[Code]....
I am trying to use this web.config code, but then I could see this:
[Code]....
See below code "ViewEntry.aspx" in web config file i am using to display post of my blog in the same way i want to use one more page to display categories of my blog.
How to use multiple url in web config file inside the rewriter tag?
<section name="rewriter" requirePermission="false" type="Intelligencia.UrlRewriter.Configuration.RewriterConfigurationSectionHandler, Intelligencia.UrlRewriter"/>
<add name="UrlRewriter" type="Intelligencia.UrlRewriter.RewriterHttpModule, Intelligencia.UrlRewriter"/>
<rewriter>
<rewrite url="(.+)-(.+).aspx" to="~/ViewEntry.aspx?id=$2"/>
[Code] ....
I have using code provided by this article :
[URL]
It works fine with IIS 7.0 on localhost but when i upload my site and try to access the rules written for url rewrite it gives me error message of 404 ..
here is my web.config file the require changes for Windows server 2003 IIS 6.0
[Code]....
I'm trying to implement URL Rewriting into my existing application and have managed to get the page and links working except that my destination page does not get the query string values.Mycde is based on the example below: http://dotnetguts.blogspot.com/2008/07/url-rewriting-with-urlrewriternet.htmlBasically I have a default.aspx page with links to another page; directory_item.aspx?Item_Id=1&Category_Id=1 directory_item.aspx?Item_Id=2&Category_Id=1 and so on... The code in my web config is as follows;
[Code]...
After hosting my site JQuery is not working, but in my site it's work properly.
I am using the script source in follwing style
[Code]....