Im throwing some helpful exception in PageMethod and showing them on client side, It was working fine on local machine but when I tested on production site, its just showing "There was an error processing the request.".
View 3 RepliesWe have created a new cname for our subdomain website. The new website is working properly with cname. We do have .net application inside the webiste which is not working with cname. For eg,1. http://servername/_folder1/app/mypage.aspx (Accessing .net application (App) website without cname)2. http://NewDomian.xxxx/app/mypage.aspx (Accessing .net application (App) website with cname)The first case is working perfectly, but when I access the second url, I got the following error.Description:
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.Source Error:
[Code]....
After checking the asp.net version on the web server it seems only the version 2.0 is available and so when I browse to the site i.e. http://servername/site
then I get this error below. Should I put something in the web.config file to solve this issue?It seems the error is to do with the reportviewer control I am using.
NOTE that the ERROR is on line 117Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify configuration file appropriately.
I am create a simple report in visual studio 2008 by using crystal report. when I am run locally its work fine but when i copy web site and run this report its show following error.
Server Error in '/xyz' Application.
Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately. Parser Error Message: Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
Source Error:
[Code]....
[Code]....
I have a ASP Web App that has been fine when deployed but now I've introduced Crystal Reports to it and is fine when testing.
On my Web Setup Project Ive right clicked, Add, Assembly and included:-
CrystalDecisions.Reportsource.dll
CrystalDecisions.Shared.dll
CrystalDecisions.web.dll
Ive run the setup on an pc away from the development environment but when connecting I get:-
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'CrystalDecisions.Web, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
Source Error:
[Code]....
Source File: C:inetpubwwwrootMala_Ordersweb.config Line: 52 Assembly Load Trace: The following information can be helpful to determine why the assembly 'CrystalDecisions.Web, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' could not be loaded.
[Code]....
I have seen a few posts regarding this issue but not one specific to my problem and I have no ideas as to what I need to do to debug this.I have some combo boxes on an aspx pages, when I select a value from the first one, it fills the second with value and so on with the third and fourth. This works with no problems until I wrap an asp.net UpdatePanel around the combo boxes and try to "ajaxify" the whole process so the page isn't dancing around. The exact error I get is: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 404
View 1 RepliesAm getting this error on clicking any of my page link.
Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 0"
How do i avoid this error.
I have a website on visual studio 2008 on my local machine. When I run through the debugger I get the following error, however when I browse the same website through the IIS manager (running IIS7.5), I can browse it. What do I need to fix to run it through debugger? The website is set as an application.
Error:
Configuration Error
Description:
An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.
[Code]....
I just got a new computer with Windows 7 and installed IIS, including support for ASP. I am running everything locally on my computer. A simple statement like <% response.write time() %> works fine, so ASP is working, However, when I try to run a page that accesses a database (at least, I am assuming that that is the root of the problem) then I get the unhelpful error message:An error occurred on the server when processing the URL. Please contact the system administrator.If you are the system administrator please click here to find out more about this error. I have no idea where to begin. the database is in the same location as it was on with my old computer, and I have adjusted permissions to the database so that everyone except Creator Owner has full permissions - for whatever reason I am not able to change Creator Owner permissions.
View 1 Repliesi make a web site using frame but session is expire message is
Object reference not set to an instance of an object
Description: HTTP 500. Error processing request.
Stack Trace:
System.NullReferenceException: Object reference not set to an instance of an object at System.Web.UI.Control.OnLoad (System.EventArgs e) [0x00000] in <filename unknown>:0 at System.Web.UI.Control.LoadRecursive () [0x00000] in <filename unknown>:0 at System.Web.UI.Page.ProcessLoad () [0x00000] in <filename unknown>:0 at System.Web.UI.Page.ProcessPostData () [0x00000] in <filename unknown>:0 at System.Web.UI.Page.InternalProcessRequest () [0x00000] in <filename unknown>:0 at System.Web.UI.Page.ProcessRequest (System.Web.HttpContext context) [0x00000] in <filename unknown>:0 My Web Config file is<configuration> <!-- store the database connection info here --> <appSettings> <add key="sBook_StoreDBConnectionString" value="Provider=Microsoft.Jet.OLEDB.4.0;User ID=Admin;Data Source=C:Program FilesCodeChargeExamplesBookStoreBookStore_MSAccess.mdb;Persist Security Info=False" /> </appSettings> <system.web> <httpRuntime executionTimeout="1000" maxRequestLength="2000000" /> <!-- DYNAMIC DEBUG COMPILATION Set compilation debug="true" to enable ASPX debugging. Otherwise, setting this value to false will improve runtime performance of this application. Set compilation debug="true" to insert debugging symbols (.pdb information) into the compiled page. Because this creates a larger file that executes more slowly, you should set this value to true only when debugging and to false at all other times. For more information, refer to the documentation about debugging ASP.NET files. --> <compilation defaultLanguage="c#" debug="true" /> <!-- CUSTOM ERROR MESSAGES Set mode="on" or "remoteonly" to enable custom error messages, "off" to disable. Add <error> tags for each of the errors you want to handle. --> <customErrors mode="Off"/> <!--<customErrors mode="On" defaultRedirect="Login.aspx"> <error statusCode="500" redirect="Login.aspx"/> <error statusCode="404" redirect="Login.aspx"/> <error statusCode="403" redirect="Login.aspx"/></customErrors> --> <!-- AUTHENTICATION This section sets the authentication policies of the application. Possible modes are "Windows", "Forms", "Passport" and "None" --> <authentication mode="None" /> <!-- APPLICATION-LEVEL TRACE LOGGING Application-level tracing enables trace log output for every page within an application. Set trace enabled="true" to enable application trace logging. If pageOutput="true", the trace information will be displayed at the bottom of each page. Otherwise, you can view the application trace log by browsing the "trace.axd" page from your web application root. --> <trace enabled="false" requestLimit="10" pageOutput="false" traceMode="SortByTime" localOnly="true" /> <!-- SESSION STATE SETTINGS By default ASP .NET uses cookies to identify which requests belong to a particular session. If cookies are not available, a session can be tracked by adding a session identifier to the URL. To disable cookies, set sessionState cookieless="true". --> <sessionState mode="InProc" stateConnectionString="tcpip=localhost:42424" cookieless="false" timeout="60" /> <!-- GLOBALIZATION This section sets the globalization settings of the application. --> <globalization requestEncoding="utf-8" responseEncoding="utf-8" /> </system.web> <connectionStrings> <add name="mydb" connectionString="Server=localhost;User=SYSDBA;Password=datacenter;Database=/opt/db/erp2.fdb;Min Pool Size=5;Max Pool Size=60;Connect Timeout=30" providerName="FirebirdSql.Web.Providers" /> <add name="mydb2" connectionString="Server=localhost;User=blackberry;Password=acgmkRMS;Database=/opt/db/pwd.fdb;Min Pool Size=5;Max Pool Size=60;Connect Timeout=30" providerName="FirebirdSql.Web.Providers" /> </connectionStrings></configuration>
Put together a little ASP.NET Web Application project in VS 2010. It includes a connection string to a remote SQL server, which is stored in Web.config. Everything works fine on my workstation, but when I test it on the web server I get this error:onfiguration Error Description:An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.
[code]...
I have installed all on my server 2008. When i got to /localhost/sitecore/Website/sitecore. i get following error. what should i need to do Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS. Source Error:
Line 2575: <add verb="GET,HEAD" path="ScriptResource.axd" validate="false" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
Line 2576: </httpHandlers>
Line 2577: <membership defaultProvider="sitecore"> -- this line shows errr
Line 2578: <providers>
Line 2579: <clear />
I want to component to upload large filesP.How can I bypass request size и request processing time restrictions?
View 4 RepliesI am trying to Upload data from Excel file. Transfer data from Excel file to XML file and passed it to Store procedure. And insert the record into database.I also set the timeout for command to zero. when i upload 1 to 500 rows its working fine and when I upload the 10000 rows than its takes time but upload all the users successfully at localhost. But when I upload the code to remote srever,than its only upload upto 300 or 400 rows.After uploading these users it will gives the error of Request Time Out . Even more if I tried to upload 50000 rows its give me the error of 'Maximum Length Exceeded'. Can anyone tell me what the maximum size of Excel sheet to upload the users. How I can get rid of the Request Time Out Issue. How I can Increase the server response time.
View 4 RepliesI am getting an error with my custom RoleProvider (based on System.Web.Security.RoleProvider) initializing in my ASP.NET application. The error is: "Description: An error occurred during the processing of a configuration file required to service this request." I see this below error happening on a Windows 2003 server with .NET 3.5 SP1. I have not seen it on Windows 2008 servers, and have not seen the error when the ASP.NET application was built under .NET 2.0 (running on this same server). Any thoughts on the nature of the error?
Classification: UNCLASSIFIED
Caveats: NONE
Server Error in '/Assist' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: FrameworkRoleProvider_Initialize
Source Error:
Line 122: <clear />
Line 123: <add
Line 124: type="Grb.Security.FrameworkRoleProvider"
Line 125: applicationName="MyApplication1" />
Line 126: </providers>
Source File: D:inetpubAssistweb.config Line: 124
Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3082
HERE'S THE INITIALIZING FUNCTION FOR THE ROLE PROVIDER:
Public Overloads Overrides Sub Initialize(ByVal name As String, ByVal config As System.Collections.Specialized.NameValueCollection)
Try
If config Is Nothing Then
Throw New ArgumentNullException("config")
End If
If String.IsNullOrEmpty(name) Then
name = Me.GetType().BaseType.Name
End If
If String.IsNullOrEmpty(config(DescriptionKey)) Then
config.Remove(DescriptionKey)
config.Add(DescriptionKey, SR.GetString(SR.RoleSqlProvider_description))
End If
MyBase.Initialize(name, config)
' Get the configuration settings
Dim configurationSettings1 As Grb.Framework.Business.ConfigurationSettings = Grb.Framework.Business.FrameworkConfiguration.GetConfiguration()
' Load the DomainManager
Dim dataManager1 As New Grb.Framework.Data.Main(Nothing, configurationSettings1.FrameworkSchema, configurationSettings1.AssistSchema, _
configurationSettings1.ConnectionString, configurationSettings1.ProviderInvariantName, _
configurationSettings1.EnablePerformanceLogging, System.Web.HttpContext.Current.Request.PhysicalApplicationPath)
' Load the DomainManager
Dim frameworkDomainManager As Grb.Framework.Business.DomainManager = New Grb.Framework.Business.DomainManager(dataManager1, -1, -1)
m_ProductDomainManager = New Grb.PlugIn.Assist.Business.DomainManager(dataManager1, frameworkDomainManager)
m_ApplicationName = config(ApplicationNameKey)
If String.IsNullOrEmpty(m_ApplicationName) Then
m_ApplicationName = SecUtility.GetDefaultAppName()
End If
If m_ApplicationName.Length > 256 Then
Throw New System.Configuration.Provider.ProviderException(SR.GetString(SR.Provider_application_name_too_long))
End If
config.Remove(ApplicationNameKey)
If config.Count > 0 Then
Dim attribUnrecognized As String = config.GetKey(0)
If Not String.IsNullOrEmpty(attribUnrecognized) Then
Throw New System.Configuration.Provider.ProviderException(SR.GetString(SR.Provider_unrecognized_attribute, attribUnrecognized))
End If
End If
Catch ex As Exception
Throw New Grb.Framework.Core.Exceptions.FrameworkBusinessException( _
Resources.ExceptionMessages.FrameworkRoleProvider_Initialize, ex)
End Try
End Sub
WEB.CONFIG:
<?xml version="1.0"?>
<configuration>
<configSections>
<sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"
/>
<sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere" />
<section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"
/>
<section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"
/>
<section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" />
</sectionGroup>
</sectionGroup>
</sectionGroup>
</configSections>
<connectionStrings>
<!-- example: <add name="ConnectionString" value="Data Source=MyServer;User Id=GRB_WEB_USER_10;Password=temp;" providerName="Oracle.DataAccess.Client" /> -->
<add name="FrameworkConnection" connectionString="Data Source=;User Id=;Password=;" providerName="Oracle.DataAccess.Client"/>
</connectionStrings>
<appSettings>
<!-- example: <add key="FrameworkSchema" value="GRB_FRAMEWORK_2" /> -->
<add key="FrameworkSchema" value="" />
<!-- example: <add key="AssistSchema" value="GRB_ASSIST_2" /> -->
<add key="AssistSchema" value="" />
<add key="FromEmail" value="support@myagency.com" />
<add key="PasswordCreateEmailSubject" value="GRB Assist Create Password" />
<add key="PasswordEstablishOrChangeEmailSubject" value="GRB Assist Established or Changed Password" />
<add key="PasswordForgotEmailSubject" value="GRB Assist Forgot Password" />
<add key="Timeout" value="60" />
<add key="RequiresSsl" value="False"/>
<!-- Email digital signing Pfx (certificate) -->
<add key="EmailSigningSignUsingCertificateFromPersonalStore" value="False" />
<add key="EmailSigningPfxFilePathAndName" value="" />
<add key="EmailSigningPfxPassword" value="" />
</appSettings>
<system.web>
<customErrors mode="Off"/>
<pages>
<controls>
<add tagPrefix="aspajax" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add tagPrefix="ajaxToolkit" namespace="AjaxControlToolkit" assembly="AjaxControlToolkit" />
<add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
</controls>
<tagMapping>
</tagMapping>
</pages>
<!--
Set compilation debug="true" to insert debugging symbols into the compiled page. Because this affects performance, set this value to true only during development.
-->
<compilation defaultLanguage="vb" debug="false">
<assemblies>
</assemblies>
</compilation>
<httpHandlers>
<remove verb="*" path="*.asmx"/>
<add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false" />
<add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
</httpHandlers>
<httpModules>
<add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
</httpModules>
<!-- 1 GB maxRequestLength -->
<httpRuntime maxRequestLength="1048576" />
<sessionState mode="InProc" timeout="60" />
<!-- note: Set authentication timeout >= session timeout (session timeout will clear authentication timeout upon session_start) -->
<!-- note: <forms name="xxxx" value must be unique for each "forms authenticated" web application run on an IIS web server -->
<!-- note: For a more secure system, set requiresSSL="true" (and install/setup an SSL key on the web site) -->
<authentication mode="Forms">
<forms loginUrl="TimedOut.aspx" slidingExpiration="false" requireSSL="false" timeout="60"/>
</authentication>
<authorization>
<deny users="?"/>
<allow users="*"/>
</authorization>
<membership defaultProvider="FrameworkMembershipProvider1" userIsOnlineTimeWindow="15">
<providers>
<clear />
<add
name="FrameworkMembershipProvider1"
type="Grb.Security.FrameworkMembershipProvider"
applicationName="Product1"
passwordRetrieval="false"
passwordReset="true"
requiresQuestionAndAnswer="false"
requiresUniqueEmail="true"
passwordFormat="Hashed"
minRequiredNonalphanumericCharacters="0"
minRequiredPasswordLength="4"
passwordStrengthRegularExpression="^[a-zA-Z0-9]+$"
passwordStrengthFailedMessage="The password must be only alpha-numeric characters."
frameworkDomainName="Master"
maximumInvalidPasswordAttempts="3"
maximumInvalidPasswordAttemptLockoutMinutes="30"/>
</providers>
</membership>
<roleManager enabled="true" defaultProvider="FrameworkRoleProvider1">
<providers>
<clear />
<add name="FrameworkRoleProvider1"
type="Grb.Security.FrameworkRoleProvider"
applicationName="MyApplication1" />
</providers>
</roleManager>
</system.web>
<system.web.extensions>
<scripting>
<webServices>
<!-- Uncomment this line to customize maxJsonLength and add a custom converter -->
<!--
<jsonSerialization maxJsonLength="500">
<converters>
<add name="ConvertMe" type="Acme.SubAcme.ConvertMeTypeConverter"/>
</converters>
</jsonSerialization>
-->
<!-- Uncomment this line to enable the authentication service. Include requireSSL="true" if appropriate. -->
<!--
<authenticationService enabled="true" requireSSL = "true|false"/>
-->
<!-- Uncomment these lines to enable the profile service. To allow profile properties to be retrieved and modified in ASP.NET AJAX applications, you need to add each property name to the readAccessProperties and writeAccessProperties attributes. -->
<!--
<profileService enabled="true"
readAccessProperties="propertyname1,propertyname2"
writeAccessProperties="propertyname1,propertyname2" />
-->
</webServices>
<!--
<scriptResourceHandler enableCompression="true" enableCaching="true" />
-->
</scripting>
</system.web.extensions>
<system.webServer>
<validation validateIntegratedModeConfiguration="false"/>
<modules>
<remove name="ScriptModule" />
<add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
</modules>
<handlers>
<remove name="WebServiceHandlerFactory-Integrated" />
<remove name="ScriptHandlerFactory" />
<remove name="ScriptHandlerFactoryAppServices" />
<remove name="ScriptResource" />
<remove name="WebServiceHandlerFactory-ISAPI-2.0"/>
<add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"
/>
<add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
</handlers>
</system.webServer>
<location path="Default.aspx">
<system.web>
<authorization>
<allow users="*"/>
</authorization>
</system.web>
</location>
<location path="Portal.aspx">
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</location>
<location path="Login.aspx">
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</location>
<location path="PasswordChange.aspx">
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</location>
<location path="PasswordForgot.aspx">
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</location>
<location path="PasswordEntry.aspx">
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</location>
<!-- Give ControlLoader.aspx full access and let it check session/authentication validation.
The rational is that if a user is "timed-out" and presses a button to load a control into ControlLoader, the ControlLoader validation will catch this condition and tell the parent page to reload (so the Login page doesn't appear in the modal-dialog).
-->
<location path="ControlLoader.aspx">
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</location>
<location path="Documents/AccountServices.aspx">
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</location>
<location path="Documents/TermsOfUse.aspx">
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</location>
<location path="SystemAlertService.asmx">
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</location>
<system.net>
<mailSettings>
<smtp from="[URL]">
<!-- example: host="[URL]-->
<network
host=""
port="25"
defaultCredentials="true" />
</smtp>
</mailSettings>
</system.net>
</configuration>
I get the following error with my app:
The XML page cannot be displayed:
A name was started with an invalid character. Error processing resource "MyPAge"
And yes I search the archives and tried everything including this:
C:WINDOWSMicrosoft.NETFrameworkv2.0.50727aspnet_regiis -u
Having following error when i upload the image
System.Security.SecurityException: Request for the permission of type 'System.Security.Permissions.FileIOPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
I move a file from server to another server .in local it is woking fine .but in production it is getting error
The remote server returned an error: (408) Request Timeout.
i used like this ..
objWebClient.UploadFile(ClientLocation,
"POST", fileName.ToString());
am connecting online database in my website. whenever forms in idle one shows in server side. after refereshing that error cleared.what is the problem. that like thisA transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.
View 1 Replieswhen ASP.NET throws an application error, IIS shows the 500 HTML error, but when a WCF service throws a FaultException (IIS 500), the client gets a proper SOAP fault with error message in it.
Is there any good documentation on this request processing?
I have been tasked with implementing a strategy to catch all errors in an ASP.net application which cause a user request or interaction to crash and then e-mailk this exception to a support team in advance of a user calling about the error.Some errors however are not causing the page to crash or be redirected to the custom error page but these are being emailed to the support team instead of simply being loggedMy requirement is to seperate what exception types will cause a page fail and which will not.Example I am currently receiving a System.Web.HttpUnHandledException which is not causing any page to fall over and therefore is not of relevance to the support team. this can be logged but does not require emailing.
View 1 RepliesI am looking details on the internal working of asp.net architecture. The topics need to include the following:
Asp.Net Thread/Application Pools
HttpRuntime
HttpApplication - When and how it is set up.How HttpContext is set up
How objects can passed along the pipeline using HttpContext.Current.Items
Why does modification of static variables requires locks in ASP.NET(advanced)IIS 7 Integration Mode
i have a web application which which proccesses some request on some data that client selects, when the client selects more than 20 objects and clicks on proceed the client recieves this error, because the server takes a long time to process, however if the records are less and hence a timely response is recieved, no such error comes?
i have increased the sessiontimeout as well as set the
I have a long running PageMethod defined in the cs that is being called from javascript and after 4 minutes I am getting the below error and 504 status code for my aspx page and onFail callback is raised.
<HTML><HEAD>
<TITLE>Gateway Timeout - In read </TITLE>
</HEAD><BODY> [code].....
I want to be able to (in code) tell the page to refresh at that point ignoring anything else it was going to do.
Explanation:
I have a property lets call it AllUsers
AllUsers
{
return Database.GetAllUsers();
}
Now I have put it like this because in my code I want to just use this property to browse all the users and not have to check if its null or not up to date. The problem is if my method .GetAllUsers() throws an exception e.g. database is unavailable. If this happens I want to display a message to the user and reload the page to its initial state.
e.g. something like this
AllUsers
{
try
{
return Database.GetAllUsers();
}
catch(Exception e)
{
AbortAllCodeAndReloadAndDisplayMessage(e.Message);
}
}
Now I can reload the page using Response.AppendHeader("Refresh", "0;URL=ThisPage.aspx");
but how can I abort all code? because if I use this where I have placed my method the code will run and then reload on the next page load.
Should I change by property design? I wanted to have a property which would always be valid and up to date so any code using it wouldn't have to worrie