I am using a CreateUserWizard. By default, the validation error messages are shown in the bottom of the control. Can I change this positioning to be shown above the control so that it is consistent with my other pages? When a user fails to enter a required fied, it displays a asterisk * next to the field. Can I have it also display some text saying that the field is required?
View 1 RepliesFirst time using the ASP.NET CreateUserWizard control and we are aliasing the Username Textbox as the Email Address because the clients wants the username to be an email address. Then hiding that controls EmailAddress. This part is working fine. The problem I'm having is the error message that gets displayed on the UI says "enter a different user name." if you type in a existing email address. We need to change this to "enter a different email address". I added a event handler for the OnCreateUserError. Added the code below, and debugging the events gets hit and sets the Literal.Text of the error message to display. Still gets overwritten on a later event. Does anyone know what I'm missing to get this error message to the UI.
protected void userWizard_CreateUserError(object sender, CreateUserErrorEventArgs e)
{
// check for dupe username error
if (e.CreateUserError == MembershipCreateStatus.DuplicateUserName)
{
// If so change to dupe email error and set the literal
e.CreateUserError = MembershipCreateStatus.DuplicateEmail;
Literal errorMessage = (Literal)userWizard.WizardSteps[0].Controls[0].Controls[0].Controls[0].Controls[0].FindControl("ErrorMessage");
errorMessage.Text = "Email address already exists. enter a different email address.";
}
}
how to change the validation summary message box title....
View 1 Repliesi have a div in my page, with position absolute i want change the position TOP if i write;
div.style.remove("top")
style.add("Top","300")
does not happen nothing.
do you know how can i do it?
I'm using emails as the user name, and I've got requiresUniqueEmail="true" in the web.config.
I have an empty CreatingUser method, and in CreatedUser I perform a couple of table entries with the new user.
When I try to add a user with an email that's already in use, I get a the default success message. But no user is added, and
it doesn't reach the CreatedUser method.
I'm hoping to discover how to add an email validation step to the CreateUserWizard. I've seen many sites where I create my membership, and then I receive an email at the address I gave, which holds an encoded link back to the website. It allows the website to confirm the email is working. I'd like to add this. I've found out how to use the maildefinitionbodyfile with user generated items, but can't find this function to require a reply by email. Could someone give an overview of what's involved (if it's complicated), or point out how to do it (if it is a built in function I'm not aware of). If there was a code sample somewhere, that would be the best possible outcome...
View 5 RepliesI have a createuserwizard which has been working recently. Even though the form has the necessary validation elements like requiredfieldvalidator, comparevalidator and so on, the validation on client side does not fire and form is submitted and saved.I checked twice the code, nothing seemed wrong and have no what might it caused.
View 11 Replies<asp:Content ID="Content3" ContentPlaceHolderID="ContentPlaceHolder2" Runat="Server">
<asp:CreateUserWizard ID="CreateUserWizard1" runat="server" BackColor="#FFFBD6"
BorderColor="#FFDFAD" BorderStyle="Solid" BorderWidth="1px"
Font-Names="Verdana" Font-Size="0.8em" oncreateduser="CreateUserWizard1_CreatedUser" Width="391px"> <SideBarStyle BackColor="#5D7B9D" Font-Size="0.9em" VerticalAlign="Top" BorderWidth="0px" />
[Code] ....
The problem is even if the validation in createuserwizard are not satisfied the user login details are created...
I have forgotte password page in my application,page have one textbox to insert email address,when user click on submit button if inserted email address (i.e. abc@gmail.com) does not exits in DB it will give custome error message like "Email ID not available".after that suppose user will enter inproper email address (aaa#gmail.com) than client side validation for regular expression will file "Email id not valid",at same both message be on screen,now i want only one message at a time.so please can you help me for same
View 2 RepliesI am using the CreateUserWizard in my VB.Net 3.5 web app. I added my own custom fields (First Name, Last Name...) to the form by using the CreateUserWizardStep and the CreateUserWizard1_CreatedUser event. Everything inserts fine into the aspnet_ tables and my own table. However, I cannot get the form validation to work. In other words, the form is ignoring the RequiredFieldValidators that I added.
View 4 RepliesIm a newbie to the world of ASP and C#, I have just created my first Registration form using the CreateUserWizard Membership Provider and set up the validators which work great, Appart from the "Username". If the user name is taken the page simply refreshes and no error appears would be realy greatfull if somone could point out where I might be going wrong. Here is my current code :
SCRIPT
protected void CreateUserWizard1_CreatedUser(object sender, EventArgs e)
{
/* User is created and setting extra parameters to profile */
[code]...
Can anyone tell me how to re-display a form when validation fails, i'm having a problem in that when i submit an empty form, the whole ascx file is returned with textbox and button etc.
[Code]....
How to change just the layout (template) of the CreateUserWizard control programmatically? I would to define another layout (not using the horrid table) but continue to use all the event handling and the creation of the user of the CreateUserWizard control. Just for reference, the following code doesn't work, and produces an unexpected result not representing my Template at all. The "InstantiateIn" method of the ITemplate is not called.
public partial class b : System.Web.UI.Page
{
protected void Page_Init(object sender, EventArgs e)
{
CreateUserWizard createUserWizard = new CreateUserWizard();
createUserWizard.CreateUserStep.ContentTemplate = new Template();
Panel1.Controls.Add(createUserWizard);
}
}
public class Template : ITemplate
{
void ITemplate.InstantiateIn(Control container)
{
container.Controls.Add(new TextBox() { ID = "UserName" });
container.Controls.Add(new TextBox() { ID = "Password" });
container.Controls.Add(new TextBox() { ID = "ConfirmPassword" });
container.Controls.Add(new TextBox() { ID = "Email" });
container.Controls.Add(new PlaceHolder() { ID = "ErrorMessage" });
}
}
}
By default in login template, in case user key in the wrong user name or password, the literal message will show the default error message, "Your login attempt unsuccessful..."What i trying to do is, I have a function in my system to disapprove a member, after the member is disapproved, he/she will not allow to login anymore. When the user trying to login, the default literal msg will show out. Is there any way i can do it more specifically like if the user enter the wrong password only, the literal msg show: "Wrong password entered" insteaed of the default msg?
Same goes to the change password control, for any error msg it just show the long msg but does not tell user whats wrong with the entered valueim trying to do something like if the user enter the wrong password, the literal msg show the one i wan to show.
I have a simple aspx page with a few TextBoxes and a submit button. Some fields are required and below the button is a ValidationSummary. The complete form is larger than screen height so one has to scroll down to reach the submit button. If I don't fill all required fields and click on submit validation fails as expected and the validation summary displays some info messages below the button. Validation happens on the client and no postback occurs.
So this all works as wished. But disturbing is that the page moves ("jumps") to top position when I click on the submit button. To see the validation summary one has to move down the page again.
I've tried to set the ShowSummary property to false (which doesn't make much sense): The validation still works (no postback) but in this case the page does not move to top position. So the problem seems to depend on rendering the validation texts.
Is there a way to prevent this page jump?
Update:
The behaviour I described above doesn't seem to be browser dependent. I've tested in five different browsers and it's everywhere the same.
I've got an ASP.NET webform with asp:TextBox and asp:RequiredFieldValidator at the bottom of the page. If client side validation fails on form submit - the page scrolls all the way up.
I'd like to maintain the scroll position on failed client-side validation.
I have serveral long ASP.Net pages, I use RequiredFieldValidator, RegularExpressionValidator and ValidatorCalloutExtender for validations, Submit buttons are typically at the bottom of the pages. The problem I have: if the errors happen at the top portion of the page when Submit buttons are clicked, the forms do not scroll to the top automatically, the users have to scroll up to see the ValidatorCalloutExtender.
View 2 RepliesI'm trying my hand in asp.net. I have a dropdown list in my page.There's a button below this dropdown.Both this control are in a panel. What I'm trying to do is when I select on dropdown list to change the value I want to shift buttons below as in when you go to select dropdown, the list opens and elongates, when this elongates I want to push the button below and when I select an item in dropdown put the buttons back.
View 1 RepliesI have component panel1 in the form width=600 heigt=300. But i want change position panel. Always panel be i center form.
View 1 RepliesI need to perform a validation to check whether a TextBox value is empty on Dropown list selected Index change using validation controls in asp.net
View 1 RepliesI have created horizontal menu like below...
<!--<ul id="topnav">
<li><a href="#">Link 1</a></li>
<li><a href="#">Link 2</a></li>
<li>
<a href="#">Link 4</a>
<span>
<a href="#">Subnav Link</a> |
<a href="#">Subnav Link</a> |
<a href="#">Subnav Link</a>
</span>
</li>
<li><a href="#">Link 3</a></li>
</ul>-->
problem is in my css i assigned margin-left:0px for span.so all my sub navs align to left.but i want to align sub nav under the mail nav.means i need to change align-left property of css dynamically using jquery.
means first sub nav link should be below 'link4' not under 'link1'
so i added following code but i dnt knw how to grab current li position and assign it to span margin.
$("#topnav li").hover(function () {
($(thіѕ).children()) {
$(thіѕ).has('span').css({ 'left': '200px' });
}, function () { //οn hover out...
});
The only thing that works in the code below for me is that it does display, so I know that I am dealing with the cotrect control. But I can't get the position to change.
[Code]....
Is there anyway to define the screen position after a postback?
Specificaly i'm referring to the vertical scroll position. Some of my controls are set to AutoPostback = True. Depending on their selected value it then reveals a hidden ASP.Net panel and some more questions.
Problem is that with each post back the page refreshes at the top and i have to scroll back down to my question. I can use the .focus() control, that's fine, but it doesn't work as perfectly as i'd like. Is there any way of defining how many lines or pixels the screen is already scrolled to upon postback?
I have a usercontrol which is used for search. Depending on which page the usercontrol is I have change the position of controls.
View 2 RepliesIs it possible to change the position of the ListItem box on a CheckBoxList? I need to have something like:
[Code]....
I'm creating the ListItems dinamically with data coming from a DB and assigning one value ListItem.Name and another to the ListItem.Value. Probably each entry on the CheckBoxList will need to be something like
----------------------------------------------------------------
| label | ListItem with only Value and no Name |
----------------------------------------------------------------
How can I do this?